ComfortBilt Pellet Stove Cast Burn Pot. When installing the burn pot make sure the ignitor port hole is towards the back of the stove. It is also important to make sure the pot sits flush on the cradle. A gap between the burn pot and cradle can alter airflow through the unit. This can cause issues with startup and cause an inefficient burn.
*If your stove currently uses a Cast Burn Pot, it is best to use the Cast version of this pot as a replacement. *
Installation:
1.) Position the burn pot so the ignitor port hole is facing towards the rear of the stove.
2.) Make sure the top edge of the cradle (The area that will accept the burn pot) is free of any ash or debris.
3.) Set the burn pot into the cradle. Make sure the front of the pot clears the front catch and sits flush on top of the cradle (A gap between the burn pot and the cradle can alter airflow through the unit. Which can cause the stove to burn inefficiently and create start-up issues).
Click on Videos for more information!
Cleaning:
It is important to make sure that you are getting proper airflow through the burn pot at all times. Inadequate airflow can cause ignition and burn issues. You should regularly clean the holes in the burn pot to ensure they are free of any ash/carbon build-up. The frequency of this cleaning will vary based on how often you burn the stove, the quality of your fuel, and your vent configuration.
1.) To clean the burn pot, you can start by removing it from the cradle (Make sure that the stove is cool and there are no embers in the pot prior to this step!)
2.) Vacuum or brush out any visible ash or carbon deposits from inside the pot.
3.) Using a small brush, drill bit or Allen wrench systematically clear out each hole in the burn pot.
4.) Vacuum out the cradle area where the burn pot will sit prior to reinstalling the pot.
5.) Place the burn pot into the cradle. Make sure that it is sitting flush and there is no gap between the pot and cradle.
For more information check out ComfortBilt's Complete Guide to Stove Cleaning or click on Videos in the above tab!
When Will My Order Ship
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
How Does Free Shipping Work?
Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Is Expedited Shipping Available?
We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Read More About Our Shipping InformationComfortBilt Pellet Stove Cast Burn Pot. When installing the burn pot make sure the ignitor port hole is towards the back of the stove. It is also important to make sure the pot sits flush on the cradle. A gap between the burn pot and cradle can alter airflow through the unit. This can cause issues with startup and cause an inefficient burn.
*If your stove currently uses a Cast Burn Pot, it is best to use the Cast version of this pot as a replacement. *
ComfortBilt
Installation:
1.) Position the burn pot so the ignitor port hole is facing towards the rear of the stove.
2.) Make sure the top edge of the cradle (The area that will accept the burn pot) is free of any ash or debris.
3.) Set the burn pot into the cradle. Make sure the front of the pot clears the front catch and sits flush on top of the cradle (A gap between the burn pot and the cradle can alter airflow through the unit. Which can cause the stove to burn inefficiently and create start-up issues).
Click on Videos for more information!
Cleaning:
It is important to make sure that you are getting proper airflow through the burn pot at all times. Inadequate airflow can cause ignition and burn issues. You should regularly clean the holes in the burn pot to ensure they are free of any ash/carbon build-up. The frequency of this cleaning will vary based on how often you burn the stove, the quality of your fuel, and your vent configuration.
1.) To clean the burn pot, you can start by removing it from the cradle (Make sure that the stove is cool and there are no embers in the pot prior to this step!)
2.) Vacuum or brush out any visible ash or carbon deposits from inside the pot.
3.) Using a small brush, drill bit or Allen wrench systematically clear out each hole in the burn pot.
4.) Vacuum out the cradle area where the burn pot will sit prior to reinstalling the pot.
5.) Place the burn pot into the cradle. Make sure that it is sitting flush and there is no gap between the pot and cradle.
For more information check out ComfortBilt's Complete Guide to Stove Cleaning or click on Videos in the above tab!
When Will My Order Ship
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
How Does Free Shipping Work?
Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Is Expedited Shipping Available?
We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Read More About Our Shipping InformationBe the first to ask a question about this.
