Replacement Lower Auger Bearing for ComfortBilt Pellet Stoves. The bottom bearing is located underneath the circular plate and is held in place by a snap ring (You will need needle-nose or snap-ring pliers to fully remove this ring). When reassembling, ensure that the bearings are in place and do not bind up when the auger shaft is spun. The bearing should glide around freely with little resistance but should not “whizz” around like a skate wheel when spun.
ComfortBilt
| Outer Diameter | 1-1/2" |
| Inner Diameter | 13/16" |
Instructions:
1.) Unplug the stove from the power supply.
2.) Remove all pellets from the hopper.
3.) Next, remove the auger assembly and auger shaft (If you have questions about this step click on "Auger Troubleshooting" under Videos).
4.) Locate the lower bearing found in the round bottom plate.
5.) Using your needle-nose or snap-ring pliers pull both ends of the ring towards each other. This will allow you to remove the clip and free the bearing.
6.) Remove the bearing.
7.) Apply lubricant (Optional) and install the new bearing into the round bottom plate.
8.) Using your needle-nose or snap-ring pliers compress and reinsert the bearing retainer clip.
9.) Reinstall the auger shaft & round bottom plate with lower bearing in place (Make sure the top CB-UPPER-BEARING is in place prior to this step).
10.) Reinstall the auger motor assembly.
11.) Plug in the unit and add fuel to the hopper.
Check out: "How to Replace Auger Bearings" by clicking Videos.
When Will My Order Ship
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
How Does Free Shipping Work?
Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Is Expedited Shipping Available?
We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Read More About Our Shipping InformationReplacement Lower Auger Bearing for ComfortBilt Pellet Stoves. The bottom bearing is located underneath the circular plate and is held in place by a snap ring (You will need needle-nose or snap-ring pliers to fully remove this ring). When reassembling, ensure that the bearings are in place and do not bind up when the auger shaft is spun. The bearing should glide around freely with little resistance but should not “whizz” around like a skate wheel when spun.
ComfortBilt
| Outer Diameter | 1-1/2" |
| Inner Diameter | 13/16" |
Instructions:
1.) Unplug the stove from the power supply.
2.) Remove all pellets from the hopper.
3.) Next, remove the auger assembly and auger shaft (If you have questions about this step click on "Auger Troubleshooting" under Videos).
4.) Locate the lower bearing found in the round bottom plate.
5.) Using your needle-nose or snap-ring pliers pull both ends of the ring towards each other. This will allow you to remove the clip and free the bearing.
6.) Remove the bearing.
7.) Apply lubricant (Optional) and install the new bearing into the round bottom plate.
8.) Using your needle-nose or snap-ring pliers compress and reinsert the bearing retainer clip.
9.) Reinstall the auger shaft & round bottom plate with lower bearing in place (Make sure the top CB-UPPER-BEARING is in place prior to this step).
10.) Reinstall the auger motor assembly.
11.) Plug in the unit and add fuel to the hopper.
Check out: "How to Replace Auger Bearings" by clicking Videos.
When Will My Order Ship
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
How Does Free Shipping Work?
Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Is Expedited Shipping Available?
We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Read More About Our Shipping InformationBe the first to ask a question about this.
