Browse By Collection
Whitfield & Lennox Igniter Heater Cartridge, H8127-AMP

Whitfield & Lennox Igniter Heater Cartridge, H8127-AMP

$29.99

A $150.00 Savings vs the OEM

SKU H8127-AMP
MPN H8127
In Stock
  • Aftermarket Part
  • Ships FREE with orders over $199
  • 30-Day Hassle Free Returns!
  • 90 Day Warranty Included
  • Buy with confidence-Buy with the experts!
  • Learn More...
Notify Me When Available

Description

Replacement igniter cartridge for Whitfield and Lennox pellet stoves.

A new igniter cartridge for Lennox pellet stoves will make lighting your pellet stove fast and easy. This igniter cartridge installs in seconds and comes fully assembled. Our electric heater igniter cartridge easily mounts to your stove allowing the cartridge to protect the igniter from excessive heat and debris. Igniter cartridges tend to wear out over time, so it's important to replace it with a quality igniter you can rely on. The igniter cartridge is made from durable materials and guaranteed to provide a perfect fit.


Replacement For Part Numbers:
  • H8127
  • 12140213
  • 12150213

Click To See Compatible Models

Compatible Models

    Lennox

  • Montage

    Whitfield

  • Advantage II-T C
  • Advantage II-T
  • Advantage Plus FS
  • Advantage Plus INS
  • Optima 2 FS
  • Optima 3 FS
  • Optima 3 INS
  • Profile 20 FS (7495 - 7494)
  • Profile 30 FS (11905 - 11904)
  • Quest Plus FS WP4
  • Quest Plus INS WP4
  • Traditions T300P
  • Traditions TP300
  • Traditions TP340

Technical Specs

Length 5-3/4"
Diameter 3/8"
Watts 400

Video

Instructions

Assembly Instructions For Whitfield & Lennox Igniter Heater Cartridge, H8127-AMP

Replacing the H8127, H8127-AMP igniter in a Whitfield or Lennox/ IronStrike Montage pellet stove:


  • Unplug the stove
  • Remove the rear service panel
  • Remove the auger motor from the shaft and remove auger mounting plate
  • On some models and the tools you may be using, the igniter can also be accessed from the left side by removing the room blower
  • Locate the igniter under the hopper, it will have white braided wires
  • Disconnect wires from old igniter and remove the igniter from the stove
  • using a 5/8" wrench, loosen igniter fitting by turning it CCW
  • There will be a red wire with a black cap attached to the igniter wires, this is an inline fuse and must be checked. If the fuse is blown, replace it.
  • Reinstall all items in the reverse order.

Troubleshooting

Replacing the H8127, H8127-AMP igniter in a Whitfield or Lennox/ IronStrike Montage pellet stove:


  • Sometimes the igniter fitting can be very difficult to crack loose, if this is the case, cut the old igniter wires as close to the fitting as possible and use a 5/8" deep-well socket and a breaker bar to crack the fitting loose
  • Always insert the new igniter and hand tighten it by hand to avoid crossing the threads
  • Stoves equipped with an igniter, especially older Whitfields, must have an igniter present in the igniter tube when the stove is operating. If you decide to use the stove without auto ignition for whatever reason, do no operate the stove without an ignition cartridge in the igniter tube, it will not burn properly

It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Read More About Our Shipping Information

Customer Reviews

Based on 52 reviews
98%
(51)
0%
(0)
0%
(0)
0%
(0)
2%
(1)
R
Ross G.

This was the part we needed it arrived quickly an we were up and running in no time

R
Rufino L.
Pellet stove igniter

Works perfectly. Install was easy.

P
Peter A.
Loved this igniter

While it was longer then the last one, it is actually better and fantastic. The last one I purchased from a Pellet stove company and paid $220.00. Thanks again. Great work and fast as well.

V
Valerie B.
Worked great!

Great parts and fast delivery!

g
george m.

Excellent service. Correct part. Works well

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • Will this fit a Whitfield quest FS-wp4

    Yes

  • will this fit a Whitfield profile 30 INs-2

    Yes.

Customer Reviews

Based on 52 reviews
98%
(51)
0%
(0)
0%
(0)
0%
(0)
2%
(1)
R
Ross G.

This was the part we needed it arrived quickly an we were up and running in no time

R
Rufino L.
Pellet stove igniter

Works perfectly. Install was easy.

P
Peter A.
Loved this igniter

While it was longer then the last one, it is actually better and fantastic. The last one I purchased from a Pellet stove company and paid $220.00. Thanks again. Great work and fast as well.

V
Valerie B.
Worked great!

Great parts and fast delivery!

g
george m.

Excellent service. Correct part. Works well

123