Whitfield Optima 2 FS Pellet Stove Repair and Replacement Parts

Replacement igniter cartridge for Whitfield and Lennox pellet stoves.A new igniter cartridge for Lennox pellet stoves will make lighting your pell...

Replacement Convection Blower for select Whitfield Pellet Stoves. This blower pushes the warm air out of the stove and into your room. Also known a...

Whitfield 12046300 Auger Motor Advantage I (WP2) Advantage II (WP2) Advantage II-T (WP2) Advantage III (WP2) Advantage II-T Classic (WP2) Advantag...

This is a "quick change", motor ONLY, exhaust blower for Whitfield stoves and does not come with housing assembly, low limit switch or appliance co...

Replacement OEM Upper Auger Bushing For All Whitfield Pellet Stoves and Lennox Montage Pellet Stove. Genuine Replacement Part. Made From Specially...

Whitfield & Lennox Silicone Auger Endplate Gasket Square, 61050003. Fits all Whitfield Stoves.

Whitfield Control Board Replacement Control Board for Whitfield Profile 30 & Optima 3. 120V AC. LED display. We carry a wide selection of Whitf...

Replacement high limit heat sensor for select Whitfield and Lennox pellet stoves. This snap switch is an important safety device, monitoring your ...

Whitfield Pellet Stove 1 RPM Auger Motor The Whitfield pellet stove auger motor feeds the stove pellets from the hopper into the burn pot. This aug...

1 RPM, Clock-wise, "High-Torque" Replacement Auger Motor for all Whitfield, Traditions, Lennox/Whitfield, and IHP Pellet Stoves. NOTE: ALL WHITFIEL...

Replacement combustion quick disconnect square gasket for select Whitfield and Lennox pellet stoves. This gasket goes between the venting appliance...

Replacement igniter cartridge for select Whitfield and Lennox pellet stoves.A new igniter cartridge for Lennox pellet stoves will make lighting yo...

Whitfield Control Board This control board fits the following Whifield pellet stoves: Profile 20 FS & Inserts Optima 2 FSReplaces part #16023941

This gasket will fit with the following Whitfield stove models: Optima (ALL) Profile 20 FS, Profile 30 FS, Profile 30 Insert, Advantage I,

Replacement fuse for select Whitfield and Lennox igniters and control boards. It also works on the Montage stove and many others.Fuse replacement ...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement convection blower gasket for select Whitfield and Lennox pellet stoves.

proof of flame sensor. This replacement includes a mounting bracket. Replacement for part# 12055908 FIts the following Whitfield Stoves: Advantage...

Whitfield Baffle Heat Deflector Works with the following Whitfield Stoves: Advantage I Profile 20 Optima 2 Quest Plus Quest  

Whitfield Pellet Stove Room Fan/ Convection Blower. Fits the following stoves: All Advantage stoves, Profile 20/30, Optima 2/3, Quest Plus, T300P/T...

Replacement Firebrick for select models of Whitfield pellet stoves. See compatible models for compatibility. The rectangle for the burn pot is 1.5"...

Replacement auger collar and set screw for select Whitfield and Lennox pellet stoves.

This 8-foot gasket is for models with 1 Piece Bent Glass not the unit with 3 pieces of glass on door.Optima, Profile 20, Profile 30, Traditions T30...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Replacement Photoeye lens for the following models: profile 20/30 optima 2/3 traditions T300P

Replacement power cord with molded end for select Whitfield and Lennox pellet stoves.

Replacement pressure switch for select Whitfield and Lennox pellet stoves. This pressure switch exhibits a normally closed circuit, opening when t...

This Combustion blower comes with POF snap(12057601) switch and housing to stove mounting gasket (61050005). The Combustion blower is also known as...

Replacement pressure switch for select Whitfield and Lennox pellet stoves. This pressure switch exhibits a normally closed circuit, opening when th...

Replacement convection blower gasket for select Whitfield and Lennox pellet stoves.

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement low limit proof of fire snap switch for select Whitfield and Lennox pellet stoves. This switch controls the stove out of "STARTUP" mod...

7" Silicone Rubber Round Gasket Combustion Motor To Housing Circular shaped gasket. Combustion Blower Motor Gasket. Fits on Exhaust (Combustion) Bl...

Replacement Convection Blower for compatible Whitfield Stoves. The Convection Blower pulls the rooms cool air across the burn pot. Making the fire ...

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Wire connector with 2 male spades and a Molex style connector.

Replacement Herrington Patterned Firebrick for select models of Whitfield pellet stoves. See compatible models for compatibility. The rectangle fo...

When the cell detects light from the fire (fire dominance scheme), a 2.4-volt signal is created by the photocell which closes the solenoid in the p...

Replacement Whitfield Combustion/Exhaust blower motor with housing for Traditions, Optima, Profile 20 and 30 pellet stoves.

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

These are after market brick retainer clips. They fit with the Whitfield Firebricks Replaces part# 13640028

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Genuine OEM Firebrick for select models of Whitfield pellet stoves. See compatible models for compatibility. The rectangle for the burn pot is 1.5...

Wiring harness for all Whitfield Models made under the Lennox, 2000-2005, to include; Whitfield Profile P30, Profile P30 Insert, Profile P20, Tradi...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement heat exchange baffle for models Profile 20, Quest plus WP4, Quest & Optima 2