Englander Door Glass Kit 9 1/8" x 9 1/8" glass and gasket , AC-G9-AMP

The Englander Door Glass Kit includes 9 1/8" x 9 1/8" glass, and the gasket necessary to install.

Note: For older stove models - Check your owner's manual to ensure the correct part number. Measure the original glass if the owner's manual is not available and compare it to the sizes listed in these descriptions.

Fitment Note (Wood Stoves): If you have a wood stove with spin draft controls on the door, see AC-G3 glass.

Fitment Note (Coal Stoves): If you own the small coal stove (models 27-C2000 or 50-SHWC2), measure your glass area, you may need the AC-G8 glass instead. If you own a large coal stove (models 27-C3000 or 50-SHWC3), order AC-G8 glass. Please call if you have questions.

• AG-G9

Compatible Models

• Every stove is different, when removing your old glass, pay attention to the system your stoves uses to secure the glass. Take pictures of your old glass in stages as you remove it from the stove so that you have a reference of how the new glass needs to be reinstalled.
• Use caution when tightening down the hardware. Fasteners should hold the glass in place. Think “snug” but not “tight”. The system must allow for expansion as the glass is heated. Overtightening fasteners, allowing the glass to “float” or move around, or allowing any metal on the door system to touch the glass will most always result in the glass breaking when the stove is heated.
• A basic rule with stove glass:
• The channels the glass is mounted in should be clean, flat, and free of debris.
• Gasket material provides an airtight seal where the glass and stove meet, this prevents the glass from making direct contact with any metal on the stove.
• When handling stove glass, wear gloves to prevent oils from your skin making contact with the glass. Gloves will also reduce the chance of any glass or gasket manufacturing debris from being absorbed into your skin.