Englander 25-PDVE Pellet Stove Repair & Replacement Parts

This burn pot gasket provides a secure seal between the burn pot and the rear of the pellet stove and is compatible with several Englander stove mo...

Englander Auger Motor Replacement More Info: This auger motor is designed to fit Englander pellet stoves including models 25-PDV and 25-PDVC (two p...

Englander Glass Gasket Window Glass GasketThis pellet stove glass gasket measures 3/4" x 48" with adhesive. The gasket includes a self-adhesive bac...

Replacement Englander Door Gasket. This gasket replaces Englander pellet stove models made after July of 1988 & wood insert models with JC or 2...

Combustion Exhaust Blower for Englander Stoves. The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the ...

Replacement Englander Convection Blower for select models made 2002 to Present. Sealed bearing system.

The Englander Pellet Stove Convection Blower pushes warm air into the room.  Replacement Englander blower motor for existing room air (convection)...

Englander 1RPM Counter Clockwise (CCW) Auger Motor Install Note: There are two of these motors in each Englander stove, an upper motor, and a lower...

Englander Vacuum Shut Down Switch. The vacuum hose from this switch connects to the Exhaust Blower of the stove. Will retrofit to older (metal) typ...

The Englander Door Glass Kit includes 9 1/8" x 9 1/8" glass, and the gasket necessary to install. Note: For older stove models - Check your owner's...

Replacement Englander Exhaust Blower Motor (Housing Not Included). Combustion Exhaust Blower for Englander Stoves: PU-076002B The combustion exhau...

Englander 1RPM Counter Clockwise (CCW) Auger Motor Made In The USA By Gleason AveryInstall Note: There are two of these motors in each Englander s...

Englander Auger Motor Replacements / Upper & Lower Motors Part Number: AMP20131-1 More Info: This auger motor is designed to fit Englander pell...

Englander Combustion Housing to Stove Gasket Oddly shaped gasket Combustion Blower Gasket Fits on Stove Exhaust (Combustion) Blower flange, where ...

Englander Combustion Exhaust Blower for Stoves The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the s...

Pellet Stove Auger Bearing (block bearing) for pellet units. 3/4 bore These new style auger bearings have a grease fitting, which will prolong the...

Englander Pellet Stove Auger Bearing (block bearing) for pellet units. 3/4" bore. Price listed is for one piece (two pieces are on each stove, one...

Englander Pellet Stove Wear Plate Replacement This part fits inside of the burn pot. Pellets burn on top of this plate and incoming air is mixed wi...

Englander Pellet Stove Wear Plate Replacement This part fits inside of the burn pot. Pellet burn on top of this plat and incoming air is mixed with...

Englander Vacuum Switch # PU-VS The vacuum hose from this switch connects to the Exhaust Blower of the stove. Will retrofit to older (metal) type ...

Englander Convection Blower The Englander Pellet Stove Convection Blower pushes warm air into the room. For Models 2002-Present Use Part # PU-4C44...

Englander Stove Door Glass Kit Part AC-G9 The Englander Door Glass Kit includes 9 1/8" x 9 1/8" glass, and the gasket necessary to install.   **NOT...

Englander Convection Blower Convection (Room Air) Blower. 250 cfm. Distributes the warm air into your living space. Replacement Englander blower m...

We offer this alternative blower as a great budget alternative to the original. The Englander Pellet Stove Convection Blower pushes warm air into t...

After Market Combustion Exhaust Blower for Englander Stoves: PU-076002B We offer this aftermarket blower as a great budget alternative to the orig...

Englander Glass Gasket Window Glass GasketThis pellet stove glass gasket measures 3/4" x 84" with adhesive. The gasket includes a self-adhesive bac...

Englander Stove Wear Plate Note: Wear Plate fits all 25-PDV & 25-PI manufactured 2003 to present. This is the plate that holds the pellets; it ...

Englander Bottom Auger Shaft Part PU-AF11B Englander Bottom Auger Shaft. for all Englander pellet stove models 2001 and later.

Englander Auger Motor Replacements / Includes BOTH Upper & Lower Motors Part Number: AMP20131-GA More Info: This auger motor is designed to fit...

Englander Top Auger Shaft Part PU-AF6T Top Auger. For all Englander pellet units. EXCEPT for EP MODELS. The Auger stirs the pellets. Fits models  2...

Englander Stove Wear Plate Wear Plate fits all 25-PDV manufactured 2003 to present. This is the plate that holds the pellets; it fits inside the bu...

This kit provides outside air that is mandatory for most pellet and multi-fuel installations (including all England's Stove Works models). Complete...

Englander Digital Control Board For models manufactured EARLIER THAN 2004 Note: YOU MUST INCLUDE YOUR MODEL,SERIAL NUMBER, AND DATE OF MANUFACTURER...

THIS KIT INCLUDES: PU-AF11B BOTTOM AUGER SHAFT AUGER BEARING & LOCKING COLLAR AUGER BEARING GASKET

Englander 3/4" Pellet Stove And Auger Shaft Locking Collar For Many Stoves (See Compatible) Sold individually. Note: Two pieces are on each stove, ...

This is a Combustion Blower Impeller 4.75" - 12 petals. Fits the following combustion blower for England Stove Works blower PU-076002B.

Hopper Lid Latch. One per package.NOTE: As a TOP LID latch, was for pellet stoves manufactured 2001 and earlier. For pellet stoves manufactured 200...

Replacement Combustion Blower Attachment for the PU-076002B Blower Motors.

High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped *UPS* (even if you phone in your order), no express ava...

Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod.

Replacement Englander Auger Motor Support Sleeve for Englander pellet stoves built in 2001 or later.

Top Auger. For all Englander pellet units. EXCEPT for EP MODELS. The Auger stirs the pellets. Fits models  25-PAF, 25-PDV, 25-PDVC, 25-PDVP, 25-PFS...

Englander Bottom Auger Shaft. for all Englander pellet stove models 2001 and later. Note: For models 1992-2000, and other than 25-PDVC, 55-SHP10 or...

Bottom Auger. For 1992-2000 models. For models 2001 and later, order PU-AF11B. Measurements: 12-1/2" Long x 2-1/4" Diameter

Spring Handle Fits ¼” Rod, ¾” Wide & 1½” Long

Replacement gasket for Englander PU-4C442 Convection Blower. The PU-4C442 blower was used in models made before 2002.

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

Replacement brass spring damper handle fits 1/4" diameter rod.