Regency Convection Blower (Made By Fasco): GF55-003-AMP

Regency

• GF55 (opens in new tab)
• GFI55 (opens in new tab)

Instructional Documents:

• Install Instructions PDF for Regency GF55-003

1. Unplug the unit from the power source.
2. Remove the right-side service panel to access the blower.
3. Disconnect the blower's wires from the main wiring harness.
4. Remove the blower mounting screws from the rear wall of the stove and remove the blower.
5. Install your new blower with a new gasket.
6. Reconnect the blower wiring.
7. Push the high-limit reset switch button just above the blower. This will verify the switch is not in the open position.
8. Plug the stove in.

If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller. Current versions of the SP4L-151-1 blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in from the manufacturer that are made to the original spec that requires lubrication. This will be indicated on the listing table attached to the blower.

This Item Qualifies For Free Shipping!