Skip to main content
Skip to main content
Product title:

Breckwell 6" Round Combustion Blower Gasket: C-G-105

Product rating:
Product price:
$7.99
Product SKU ! C-G-105
Product MPN ! C-G-105
Product availability: In Stock
Bullet point features
Pack-Size

Description

Breckwell 6" Round Combustion Blower Gasket.  The combustion blower gasket makes a seal between the blower and blower housing.  A proper seal in this area is very important.  If the gasket is damaged or worn exhaust may escape and enter the room.  You should inspect this gasket on a regular basis! 

*Fits between the blower motor and the blower housing on the A-E-027 combustion blower.*


Replacement For Part Number:

  • C-G-105

View Compatible Models

Compatible Models

    Breckwell

  • P1000 Big E
  • P2000 Tahoe
  • P22 Maverick
  • P22I Maverick Insert
  • P23 Sonora
  • P24 Blazer
  • P26 Cadet
  • P2700 Mojave
  • P32i Cadet
  • P4000 Classic Cast
  • P7000 Solstice

Technical Specs

Instructions

Install Instructions For Breckwell 6" Round Combustion Blower Gasket: C-G-105

1.) Unplug your stove and make sure the unit is cool to the touch.

2.) Locate the combustion blower (The combustion blower will be directly behind the exhaust collar on most stoves). To gain access to this area you may need to remove the rear and side panels (This will vary depending on what stove you have).

3.) Loosen and remove the bolts attaching the combustion blower to the combustion blower housing.

4.) Remove the blower from the blower housing and set it next to the unit (Take care not to damage any wires).

5.) Remove the old gasket (If sections of the old gasket are stuck to the housing you can use a flathead screwdriver to remove them).

6.) Once the surface is clean position the new gasket in place (On most units the combustion blower can be attached to the unit once the screws are partially threaded into the blower housing. If this is the case with your blower, you should get the screws started while your positioning the gasket in place).

7.) If your gasket is set in place and the screws are partially threaded into the blower housing: line up the holes on the blower flange with the screws on the housing, set the blower in place, rotate the blower slightly and tighten the screws down in a crisscross pattern.

8.) Reinstall any previously removed panels/vent pipe and plug in your stove.

Troubleshooting

-The combustion blower gasket should be inspected on a regular basis. If you are noticing a smoke smell or visibly see smoke around your stove the unit should be shut down and all gaskets should be inspected. When inspecting around the combustion blower look for signs of smoke spillage. Often you will see black or brown stains on or around the combustion blower gasket if there is a leak in this area. You can try tightening the screws if they are loose. If tightening the screws does not resolve the issue or the gasket is visibly damaged it should be replaced!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $49!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Breckwell 6" Round Combustion Blower Gasket.  The combustion blower gasket makes a seal between the blower and blower housing.  A proper seal in this area is very important.  If the gasket is damaged or worn exhaust may escape and enter the room.  You should inspect this gasket on a regular basis! 

*Fits between the blower motor and the blower housing on the A-E-027 combustion blower.*


Replacement For Part Number:

  • C-G-105

View Compatible Models

Compatible Models

    Breckwell

  • P1000 Big E
  • P2000 Tahoe
  • P22 Maverick
  • P22I Maverick Insert
  • P23 Sonora
  • P24 Blazer
  • P26 Cadet
  • P2700 Mojave
  • P32i Cadet
  • P4000 Classic Cast
  • P7000 Solstice

Instructions

Install Instructions For Breckwell 6" Round Combustion Blower Gasket: C-G-105

1.) Unplug your stove and make sure the unit is cool to the touch.

2.) Locate the combustion blower (The combustion blower will be directly behind the exhaust collar on most stoves). To gain access to this area you may need to remove the rear and side panels (This will vary depending on what stove you have).

3.) Loosen and remove the bolts attaching the combustion blower to the combustion blower housing.

4.) Remove the blower from the blower housing and set it next to the unit (Take care not to damage any wires).

5.) Remove the old gasket (If sections of the old gasket are stuck to the housing you can use a flathead screwdriver to remove them).

6.) Once the surface is clean position the new gasket in place (On most units the combustion blower can be attached to the unit once the screws are partially threaded into the blower housing. If this is the case with your blower, you should get the screws started while your positioning the gasket in place).

7.) If your gasket is set in place and the screws are partially threaded into the blower housing: line up the holes on the blower flange with the screws on the housing, set the blower in place, rotate the blower slightly and tighten the screws down in a crisscross pattern.

8.) Reinstall any previously removed panels/vent pipe and plug in your stove.

Troubleshooting

-The combustion blower gasket should be inspected on a regular basis. If you are noticing a smoke smell or visibly see smoke around your stove the unit should be shut down and all gaskets should be inspected. When inspecting around the combustion blower look for signs of smoke spillage. Often you will see black or brown stains on or around the combustion blower gasket if there is a leak in this area. You can try tightening the screws if they are loose. If tightening the screws does not resolve the issue or the gasket is visibly damaged it should be replaced!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $49!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 22 reviews
100%
(22)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
RICHARD D.
Pellet Stove Motor Gasket

Quality product and quick delivery!

J
James M.
Great part’s awesome price quick delivery

Quick shipping great price’s on all there parts this is like the third time I have ordered from them

M
Michael T.
Review!

Great service, good price and the parts where here the next day !

D
Dan M.
They work great

I always have a extra one on hand

S
Stephen g.
Nlower gasket

Fast delivery and great fittment

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question
  • does this fit for model VG5790

    Yes

Customer Reviews

Based on 22 reviews
100%
(22)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
RICHARD D.
Pellet Stove Motor Gasket

Quality product and quick delivery!

J
James M.
Great part’s awesome price quick delivery

Quick shipping great price’s on all there parts this is like the third time I have ordered from them

M
Michael T.
Review!

Great service, good price and the parts where here the next day !

D
Dan M.
They work great

I always have a extra one on hand

S
Stephen g.
Nlower gasket

Fast delivery and great fittment

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid