Breckwell P7000 Solstice Pellet Stove Repair and Replacement Parts

Breckwell Pellet Stove Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the sto...

Breckwell Pellet Stove Distribution/Convection Blower.  This blower circulates air around the stove and across the heat exchanger.  It is responsib...

Breckwell Pellet Stove Igniter (250W/300W).  The igniter allows your unit to auto light when there is a call for heat.  It works by superheating th...

Breckwell Thermodisc This Breckwell Thermodisc Low Temp Fits All Models Except P6000 The Low-Limit or Proof of Fire Thermodisc is mounted on the C...

Breckwell 6" Round Combustion Blower Gasket.  The combustion blower gasket makes a seal between the blower and blower housing.  A proper seal in th...

Breckwell Thermodisc High Temp #C-E-090-21 This important safety device will monitor heat in the stove. If your stove gets too hot the switch will ...

Breckwell Thermodisc This Breckwell Thermodisc Low Temp Fits All Models Except P6000 The Low-Limit or Proof of Fire Thermodisc is mounted on the C...

Replacement burnpot for Breckwell pellet stoves. This burnpot fits most of the newer stoves that have an igniter. Breckwell Burnpot Assembly. This ...

Breckwell Door Glass Gasket. The glass gasket provides a tight seal between the door glass and door frame.  A leak around the door glass can cause ...

Breckwell Vacuum Switch C-E-201 This Vacuum/Air Switch is used on all Pellet and Multi-Fuel Stoves. This is a safety sensor that will measure the a...

Replacement Pellet Stove Exhaust Blower Gasket. Fits many models (Lennox, Breckwell, Enviro, & More).  This gasket seals between the exhaust bl...

This important safety switch cuts power to the feed system if the pellet stove overheats and will automatically reset once the stove has cooled.

Breckwell Exhaust Blower Assembly.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove. ...

Replacement 1 RPM auger motor for all Breckwell Pellet Stoves with digital control boards with 5 heat levels, to include all pellet stoves made aft...

Breckwell Pellet Stove Exhaust Blower Gasket.  This gasket seals between the exhaust blower housing and the unit.  It is important to inspect this ...

Breckwell Pellet Stove Igniter (250W/300W).  The igniter allows your unit to auto light when there is a call for heat.  It works by superheating th...

Breckwell Rope Door Gasket (5/8" x 6').  It is important that there is a good seal between the door and the body of your stove.  A poor seal can ca...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Breckwell Pellet Stove Exhaust Blower W/ Housing.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air i...

Replacement Breckwell  burnpot assembly for pellet stoves. This burnpot fits most of the newer stoves that have an igniter. This pot comes with the...

Breckwell Pellet Stove OEM Combustion Blower (W/ Housing).  The exhaust blower is responsible for drawing smoke out of the unit and pulling combust...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This is an aftermarket burnpot that we have welded ourselves. Breckwell A-S-Burnpot P2K burnpot assembly. There is 1" in between the two holes on ...

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Wire connector with 2 male spades and a Molex style connector.

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper. 7in total overall length.

Replacement Breckwell Vacuum Pressure Switch Hose For Many Models. 12" Length (1 Foot).

Breckwell Vacuum Switch C-E-201 This Vacuum/Air Switch is used on all Pellet and Multi-Fuel Stoves. This is a safety sensor that will measure the a...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement heat exchanger cleaning tool that came with your Breckwell pellet stove. For all stoves made after 1996

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Wire Stripper & Cutter Tool For Wire Sizes 10-22 AWG

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Breckwell Pellet Stove Exhaust Blower Housing.  Does not include blower.  The exhaust blower is responsible for drawing smoke out of the unit and p...

Breckwell Pellet Stove Door Glass (Big E 1000 "PB" & P7000). The glass on your stove allows you to view the fire and helps transfer heat into t...

Breckwell Pellet Stove Convection Blower Adapter.  This adapter allows you to fit the smaller opening of the newer convection blowers to some older...

This is a replacement wiring adapter Ground Connector Ring to Female Spade Connector With 10" Wire and ring for #8 Screw.

This is a female bullet connector, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical com...

Replacement Control Board Panel For Most Breckwell Pellet Stoves. Compatible with A-E-101, A-E-301, A-E-401GE & A-E-401 Circuit Boards.

This is a male bullet connector, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical compo...

Breckwell Pellet Stove Door Glass (Big E 1000 "PB" & P7000). The glass on your stove allows you to view the fire and helps transfer heat into t...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This is a replacement wiring adapter Ground Connector Ring to Ground Connector Ring With 10" Wire