UUSC US Stove Convection Room Blower by Fasco, A-E-033-AMP

Replacement convection blower for US Stove 5040 pellet stove. The mounting plate dimensions are 4″ X 4 3/8″

The Distribution Convection Room Blower serves two purposes. By circulating the room air through the stove's heat exchanger the stove provides heat to the room and this process also keeps the stove from overheating. If your stove is giving you an overheat error code OR if the room blower stays on at startup and will not feed pellets your room blower has either stopped working OR the blower wheel inside the housing of this blower needs to be cleaned out so that it can freely move enough air to keep the stove from overheating.

It is suggested to replace the high limit safety snap disc switch whenever you are replacing a room blower. 

Please see the instructions for resetting the blower speed when replacing your blower

Note: If you have an older Breckwell stove with mounting plate dimensions 5" x 5 1/2" you will need an adapter plate A-MP-KIT

Fitment Note: Some models of P1000 Big E stove require the blower motor to be rotated counter clockwise by one screw to fit. This is made easy by removing the impeller and then unscrewing the motor, then turning 1/3 turn, and reattaching it.

• A-E-033
• 80647
• PP7310
• C-E-029

Need to upgrade or replace your wiring & connectors?

Shop for connectors, adapters, service tools, and more. Shop now

Compatible Models

1. Unplug the unit from the power source
2. Remove the rear panel, you may need to remove the venting from the unit depending upon your installation
3. Remove the side panel which has the the controller.
4. Disconnect all of the wires from the controller and set the panel aside
5. Remove the wires for the blower which is located behind the control area
6. Remove the blower mounting screws from the rear wall of the stove
7. Install your new blower with a new gasket
8. Reconnect the blower wiring
9. Reconnect the wires to the the controller
10. Reconnect rear panel, venting and power cord.

• Instructions for UUSC US Stove Convection Room Blower by Fasco, A-E-033-AMP

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.