Install Instructions For Breckwell Dual Convection Blower Motor: 80591-AMP
1.) Loosen and remove the three screws along the backside of the stove that secure the side panel to the unit.
2.) Pull the side panel down and away from the top of the stove.
3.) Locate the control board and unplug the white Molex plug at the bottom of the control board (Be careful not to pull the wires loose from the plug).
4.) Remove the rear panel of the stove.
5.) Locate and unplug, the two wires leading from the blower motor to the wiring harness.
6.) Remove the bolts holding the blower motor to the stove and remove the blower. (Now is a good time to check the gasket between your blower motor and the stove).
7.) Position the new motor and gasket in place and reinstall the previously removed bolts.
8.) Reconnect the wiring harness to the two leads coming from the new blower motor.
9.) Reinstall the rear panel.
10.) Reconnect the Molex plug to the bottom of the control panel.
11.) Reinstall the side panel.
12.) Plug in the stove and test the blower.