Skip to main content
Skip to main content
Product title:

Breckwell Pellet Stove Auger Motor (USA Gleason Avery 80642): C-E-017-AMP

Product rating:
Product price:
Save 10%
$179.99
$161.99

A $88.00 Savings over the OEM

Product SKU ! 708-GA(BRE)
Product MPN ! C-E-017
Product availability: In Stock
Bullet point features
  • Aftermarket Part Learn more about the difference between OEM and AMP parts
  • Replaces Part # C-E-017, 80642 for many Breckwell models
  • Made In The USA By Gleason Avery
  • Whisper Quiet
  • Clockwise Rotation
  • 120V, 1 RPM, Clockwise Rotation, MALE SPADES Wire Connectors
  • FREE Shipping with orders over $99
  • 30-Day Hassle Free Returns
  • 90-Day Warranty Included With Purchase
  • Same Day Shipping On Most Items!*
  • See Complete Description
Buy Now Pay Later

Frequently Bought Together

Total Price: $179.98

Description

Breckwell Pellet Stove Auger Motor (1 RPM CW) Gleason Avery (80642): C-E-017. The motor attaches to the auger shaft and rotates the auger in timed intervals. This allows fuel from the hopper to be fed into the burn pot. If your motor is not turning and you have confirmed all safety switches are operating as they should, the motor may need to be replaced!

Note: Pre-drilled hole for attachment with a cotter pin.


Replacement For Part Numbers:

  • C-E-017
  • 80642

Compatible Models

Technical Specs

Length (in) 4 ¾"
Width (in) 4 ¼"
Height (in) 2 ¾"
Voltage 120
Amperage 0.72
RPM (Rotations/Minute) 1
Rotation Direction Clockwise
Frequency (Hz) 60
Wire Connector Notes MALE SPADES
Weight 3.5 lbs

Instructions

Install Instructions For Breckwell Pellet Stove Auger Motor (USA Gleason Avery 80642): C-E-017-AMP

Instructional Documents:

This is a basic overview of how to replace the auger/drive motor. This process will vary depending on the unit!

1.) Make sure that your unit is cool to the touch.

2.) Unplug the stove.

3.) Remove the needed panels to gain access to the auger/drive motor.

4.) After locating the motor, disconnect the wire leads connecting the motor to the wiring harness.

5.) Using a pair of pliers remove the retainer pin that attaches that auger motor to the auger shaft (This should release the auger motor). On some motors, a set screw will need to be removed.

6.) Position the new auger motor in place (You may need to rotate the auger in order to line up the hole on the auger shaft with the hole on the stub of the motor).

7.) Install the previously removed retainer pin or set screw.

8.) Reconnect the wire leads to the wiring harness.

9.) Reinstall any previously removed panels.

10.) Plug in the unit and test the motor.

Troubleshooting

It is important to understand what safety switches are on your stove. Often times when the auger motor is not feeding pellets it is the result of an issue somewhere else in the unit. Make sure you review your manual and test all switches that could be affecting auger rotation.


On most units, an issue with the hopper lid or pressure switch can cause the motor not to rotate!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Breckwell Pellet Stove Auger Motor (1 RPM CW) Gleason Avery (80642): C-E-017. The motor attaches to the auger shaft and rotates the auger in timed intervals. This allows fuel from the hopper to be fed into the burn pot. If your motor is not turning and you have confirmed all safety switches are operating as they should, the motor may need to be replaced!

Note: Pre-drilled hole for attachment with a cotter pin.


Replacement For Part Numbers:

  • C-E-017
  • 80642

Technical Specs

Length (in) 4 ¾"
Width (in) 4 ¼"
Height (in) 2 ¾"
Voltage 120
Amperage 0.72
RPM (Rotations/Minute) 1
Rotation Direction Clockwise
Frequency (Hz) 60
Wire Connector Notes MALE SPADES
Weight 3.5 lbs

Instructions

Install Instructions For Breckwell Pellet Stove Auger Motor (USA Gleason Avery 80642): C-E-017-AMP

Instructional Documents:

This is a basic overview of how to replace the auger/drive motor. This process will vary depending on the unit!

1.) Make sure that your unit is cool to the touch.

2.) Unplug the stove.

3.) Remove the needed panels to gain access to the auger/drive motor.

4.) After locating the motor, disconnect the wire leads connecting the motor to the wiring harness.

5.) Using a pair of pliers remove the retainer pin that attaches that auger motor to the auger shaft (This should release the auger motor). On some motors, a set screw will need to be removed.

6.) Position the new auger motor in place (You may need to rotate the auger in order to line up the hole on the auger shaft with the hole on the stub of the motor).

7.) Install the previously removed retainer pin or set screw.

8.) Reconnect the wire leads to the wiring harness.

9.) Reinstall any previously removed panels.

10.) Plug in the unit and test the motor.

Troubleshooting

It is important to understand what safety switches are on your stove. Often times when the auger motor is not feeding pellets it is the result of an issue somewhere else in the unit. Make sure you review your manual and test all switches that could be affecting auger rotation.


On most units, an issue with the hopper lid or pressure switch can cause the motor not to rotate!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 38 reviews
97%
(37)
0%
(0)
0%
(0)
0%
(0)
3%
(1)
G
Gale M.
Lopi Yankee PS - Gleason Avery Auger Motor

This auger fit our stove perfectly and is running like a champ. Our stove is 21 yrs old.Thank you for carrying parts for our stove. Your service is spot on too.

B
Beverly F.
AUGER

Service was excellent. We had to call to get the part number so we could order the correct part as it was not listed in the owner's manual. We then ordered on the website and were grateful they listed other parts that were needed to install the part. Also like the excellent description of original and after market and suggested the lower price along with the part to be considered.

C
Charles C.
Fast service

ordered parts needed and they where at my house with in 3 days

D
Dan M.
The auger motor was easy to install.

Auger motor is very quiet

T
Thomas Y.
Breckwell auger motor changout.

The new motor replaced the old one perfectly. It is operating well. Thanks for all the technical help.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 38 reviews
97%
(37)
0%
(0)
0%
(0)
0%
(0)
3%
(1)
G
Gale M.
Lopi Yankee PS - Gleason Avery Auger Motor

This auger fit our stove perfectly and is running like a champ. Our stove is 21 yrs old.Thank you for carrying parts for our stove. Your service is spot on too.

B
Beverly F.
AUGER

Service was excellent. We had to call to get the part number so we could order the correct part as it was not listed in the owner's manual. We then ordered on the website and were grateful they listed other parts that were needed to install the part. Also like the excellent description of original and after market and suggested the lower price along with the part to be considered.

C
Charles C.
Fast service

ordered parts needed and they where at my house with in 3 days

D
Dan M.
The auger motor was easy to install.

Auger motor is very quiet

T
Thomas Y.
Breckwell auger motor changout.

The new motor replaced the old one perfectly. It is operating well. Thanks for all the technical help.

123