Englander 25-CBEP, 55-SHPCBEP, 55-TRPCBEP Pellet Stove Repair and Replacement Parts

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element...

Englander Pellet Stove Vacuum Hose Kit Englander Pellet Stove Vacuum Pressure Hose Kit PU-VH for vacuum shut-down and firebox pressure switches. 5 ...

Englander Combustion Blower Gasket PU-CBMG An airtight seal around the gaskets is crucial to proper stove performance and safety. Contains the foll...

Englander Vacuum Shut-Down Switch Part CU-VS Englander Vacuum Shut Down Switch, 0.05" WC. This is the "Door Ajar Switch." The vacuum hose from this...

Englander Combustion Exhaust Blower for Stoves: PU-076002B The combustion exhaust blower delivers a steady stream of forced air (negative draft) t...

Englander Hopper Lid Gasket Part PU-HLG 13' gasket for pellet stove lid. Comes with a self-adhesive backing for quick and easy install. Below are a...

Englander Hopper Lid Safety Switch Button Part # AC-HLSB is directly connected to the top auger motor. In the event the hopper lid is left open whi...

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element...

Englander Convection Blower The Englander Pellet Stove Convection Blower pushes warm air into the room. For Models 2002-Present Use Part # PU-4C44...

Englander Burn Pot / Fire Pot for EP & EPI only. Burn Pot unit for "Evolution Pellet" (models with EP in model number) and "Imperial Pellet" (m...

2 rpm Clockwise auger motor for Englander Multi-Fuel unit, Englander Pellet Utility Furnace and the Pellet Auxiliary Heater. This motor turns the a...

Englander Door Gasket for EP & EPI Only The gasket kit designed specifically for the Evolution Pellet stove models. Gasket measures 3/4" round,...

2 RPM Clockwise Auger Motor for Englander Evolution Pellet (EP) Multi-Fuel Unit (CPM), Englander Pellet Utility Furnace (PUF), and the Pellet Auxil...

Englander Hopper Lid Gasket Part PU-HLG 6.5 Feet of gasket for pellet stove lid. Comes with a self-adhesive backing for quick and easy install. 25-...

For EP & EPI Only Window glass gasket for Englander stoves with "EP" in model number. Gasket is approximately 3/4" x 10' flat. Gasket has adhes...

Englander EP Burn Pot Burn Pot unit for "Evolution Pellet" (models with EP in model number) and "Imperial Pellet" (models with IP in model number) ...

Slotted Cradle GasketDesigned for stoves that have IP in the model name. Fits on cradle underneath the burn pot. Aprox Dimensions: 8-1/4" x 3" Co...

2 RPM Clockwise auger motor for Englander Multi-Fuel unit, Englander Pellet Utility Furnace and the Pellet Auxiliary Heater. This motor turns the a...

This is a Combustion Blower Impeller 4.75" - 12 petals. Fits the following combustion blower for England Stove Works blower PU-076002B.

Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod.

Replacement Englander pellet stove auger coupler for corn stoves. See technical specs for a list of compatible stoves.

Steel 7" Auger Shaft for all Englander "Evolution Pellet" (Freestanding and Insert models with EP in the model number), Englander Pellet Utility Fu...

We offer this alternative blower as a great budget alternative to the original. Blower Only, Housing Not Included Combustion Exhaust Blower for E...

Replacement Side Glass(1 PIECE) for models 25-EP, 55-SHPEP, 55-SHPEPL and 55-TRPEP Parts | 25-EPI, 55-SHPEPI, 55-SHPEPIL and 55-TRPEPI Parts This g...

Also known as a Rubber Vibration Dampener. This gasket can be seen on the diagram under #29. NOTE: Interchangeable with CU-RGN nylon gasket, both p...

Englander Hopper Lid Safety Switch Button Part # AC-HLSB is directly connected to the top auger motor. In the event the hopper lid is left open whi...

Replacement Combustion Blower Attachment for the PU-076002B Blower Motors. 

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement gasket for Englander PU-4C442 Convection Blower. The PU-4C442 blower was used in models made before 2002.

Replacement Combustion Blower Housing for the PU-076002B Blower Motors. Includes the gaskets and hardware.

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Englander Combustion Exhaust Blower for Stoves: PU-076002B The combustion exhaust blower delivers a steady stream of forced air (negative draft) th...

Englander Convection Blower Replacement Gasket For models which take the PU-4C442 Convection Blower Motor

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Englander 25EP Baffle Impingement Plate-Part Number: IP-25EP Dimensions: 20 ½" x 6 1/8"

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Door Glass is 10 5/8" x 14 1/2" The product picture is shown as the 25-EP center glass but this glass is used on many other Englander stoves, see c...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....