Englander 25-EP, 55-SHPEP, 55-TRPEP Pellet Stove Repair and Replacement Parts

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element...

Englander Pellet Stove Vacuum Hose Kit Englander Pellet Stove Vacuum Pressure Hose Kit PU-VH for vacuum shut-down and firebox pressure switches. 5 ...

Englander Glass Gasket Window Glass GasketThis pellet stove glass gasket measures 3/4" x 48" with adhesive. The gasket includes a self-adhesive bac...

Englander Combustion Blower Gasket PU-CBMG An airtight seal around the gaskets is crucial to proper stove performance and safety. Contains the foll...

Combustion Exhaust Blower for Englander Stoves. The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the ...

Englander Vacuum Shut-Down Switch Part CU-VS This sensor needs to see a draw of negative pressure (suction) of at least 0.05" WC (water column) to ...

The Englander Pellet Stove Auger Bearing Gasket Fits Stoves Built after 2001 The new material used for this auger bearing replaces PU-ABG Fits bet...

The Englander Pellet Stove Convection Blower pushes warm air into the room.  Replacement Englander blower motor for existing room air (convection)...

Replacement Englander Exhaust Blower Motor (Housing Not Included). Combustion Exhaust Blower for Englander Stoves: PU-076002B The combustion exhau...

6" Englander Combustion Motor to Housing Gasket Get a Replacement For Your Englander Combustion Motor to Housing Gasket 6" Round at a Super Low Pri...

Englander Combustion Exhaust Blower for Stoves The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the s...

Englander Stove Control Board 5 Amp Fuse  5 amp, 120 Volt fusefor all Englander, Summers Heat and Timber Ridge Pellet Stoves

Englander Hopper Lid Safety Switch Button Part # AC-HLSB is directly connected to the top auger motor. In the event the hopper lid is left open whi...

Replacement Heat Sensor for Control Board For PU-CB98 or PU-CB04 control boards. This part is used on all stoves made in 1998 and after. If the hea...

Englander Hopper Lid Gasket Part PU-HLG 13' gasket for pellet stove lid. Comes with a self-adhesive backing for quick and easy install. Below are a...

Englander Burn Pot / Fire Pot Burn Pot unit for "Evolution Pellet" (models with EP in model number) and "Imperial Pellet" (models with IP in model ...

2 rpm Clockwise auger motor for Englander Multi-Fuel unit, Englander Pellet Utility Furnace and the Pellet Auxiliary Heater. This motor turns the a...

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element...

This is a set of 6 serrated hex nuts that are used to secure the combustion / exhaust blower motor onto blower housings that have threaded mounting...

Englander Convection Blower The Englander Pellet Stove Convection Blower pushes warm air into the room. For Models 2002-Present Use Part # PU-4C44...

Replacement Heat Sensor for Control Board For PU-CB98 or PU-CB04 control boards. This part is used on all stoves made in 1998 and after. If the hea...

We offer this alternative blower as a great budget alternative to the original. The Englander Pellet Stove Convection Blower pushes warm air into t...

Englander Vacuum Shut-Down Switch Part CU-VS Englander Vacuum Shut Down Switch, 0.05" WC. This is the pressure switch that detects vacuum pressure ...

After Market Combustion Exhaust Blower for Englander Stoves: PU-076002B We offer this aftermarket blower as a great budget alternative to the orig...

Englander Glass Gasket Window Glass GasketThis pellet stove glass gasket measures 3/4" x 84" with adhesive. The gasket includes a self-adhesive bac...

Englander Stoves Firebrick Replaces part #AC-CFBEP It fits the following Englander Stoves: 25-EPI 25-EP 55-SHPPEPI 55-SHPEP 55-TRPEPI 55-TRPEP 55-S...

Englander Door Gasket for EP & EPI Only The gasket kit designed specifically for the Evolution Pellet stove models. Gasket measures 3/4" round,...

2 RPM Clockwise Auger Motor for Englander Evolution Pellet (EP) Multi-Fuel Unit (CPM), Englander Pellet Utility Furnace (PUF), and the Pellet Auxil...

Englander Hopper Lid Gasket Part PU-HLG 6.5 Feet of gasket for pellet stove lid. Comes with a self-adhesive backing for quick and easy install. 25-...

Slotted Cradle GasketDesigned for stoves that have IP in the model name. Fits on cradle underneath the burn pot. Aprox Dimensions: 8-1/4" x 3" Co...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

For EP & EPI Only Window glass gasket for Englander stoves with "EP" in model number. Gasket is approximately 3/4" x 10' flat. Gasket has adhes...

Englander EP Burn Pot Burn Pot unit for "Evolution Pellet" (models with EP in model number) and "Imperial Pellet" (models with IP in model number) ...

2 RPM Clockwise auger motor for Englander Multi-Fuel unit, Englander Pellet Utility Furnace and the Pellet Auxiliary Heater. This motor turns the a...

Replacement Englander pellet stove auger coupler for corn stoves. See technical specs for a list of compatible stoves.

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Englander Brick Fiber Board ReplacementEnglander Stove Ceramic Fiber Board for "Evolution Pellet" Stove models. One piece backboard. View Our Huge ...

This is a Combustion Blower Impeller 4.75" - 12 petals. Fits the following combustion blower for England Stove Works blower PU-076002B.

Recessed Englander Hopper Lid Latch.  The seals around the top of the pellet hopper are important for the safe and efficient operation of the unit...

Hinge Pin Rivet for cast stove door; 3/8" Diameter x 1 3/4" Length.

Englander Pellet Stove Hopper Lid Safety Switch - Arm Lever

Replacement Combustion Blower Attachment for the PU-076002B Blower Motors.

High-temperature black spray paint. 12 oz. can. NOTE: By law, this item can only be shipped *UPS* (even if you phone in your order), no express ava...

Englander Pellet Stove Ash Pan Gasket Replacement part for ash pan gasket. Gasket measuring 84" x 3/4" wide and comes with self adhesive for easy i...

Door Spring Handle (large). Color: Brushed Nickel. Fits 1/2" diameter rod.

Digital Control Board for Englander stove models: 25-EP, 55-SHPEP, 55-SHPEPL, 55-TRPEP, 25-EPI, 55-SHEPI, 55-SHPEPIL, 55-TRPEPI READ BEFORE ORDERI...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This kit contains all the parts needed to re-gasket your entire Englander 25-EP & 25-EPI pellet stove. Replacing the gaskets on your pellet sto...