Skip to main content
Skip to main content
Product title:

Englander Igniter: PU-CHA

Product rating:
Product price:
$129.99
Product SKU ! PU-CHA
Product MPN ! PU-CHA
Only 8 Left In Stock
Bullet point features

Frequently Bought Together

Total Price: $137.98

Description

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element that fits inside the Auto-Igniter element tube.

(Auto-Start units that have a manufacture date of 2004 or later).

Note: This ignitor is not compatible with the 25-SSP01 pellet stove. Shortly after the manufacture of this stove, Englander has changed the ignitor to this part.


Replacement For Part Numbers:

  • PU-CHA
  • 44291

View Compatible Models

UPC: 794909901550

Compatible Models

    Englander

  • 25-CAB80
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PFS
  • 25-PI (Post: 2004)
  • Smoke-N-Sear

Technical Specs

Cartridge Length 4 3/4"
Diameter of Cartridge 3/8"
Collar Outside Diameter 3/4"
Wire Length 19"
Overall Length 24 3/4" Including The Wires
Connectors Female Spades
Watts 300
Volts 120

Instructions

Troubleshooting

Install two gaskets between the burnpot and the stove if your burn pot has warped.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement Cartridge Igniter Heater Assembly for auto-start Englander pellet stoves (see compatible). Includes locking collar. This is the element that fits inside the Auto-Igniter element tube.

(Auto-Start units that have a manufacture date of 2004 or later).

Note: This ignitor is not compatible with the 25-SSP01 pellet stove. Shortly after the manufacture of this stove, Englander has changed the ignitor to this part.


Replacement For Part Numbers:

  • PU-CHA
  • 44291

View Compatible Models

UPC: 794909901550

Compatible Models

    Englander

  • 25-CAB80
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PFS
  • 25-PI (Post: 2004)
  • Smoke-N-Sear

Technical Specs

Cartridge Length 4 3/4"
Diameter of Cartridge 3/8"
Collar Outside Diameter 3/4"
Wire Length 19"
Overall Length 24 3/4" Including The Wires
Connectors Female Spades
Watts 300
Volts 120

Instructions

Troubleshooting

Install two gaskets between the burnpot and the stove if your burn pot has warped.


It is advisable to ALWAYS replace your door gasket when you are replacing an igniter. A leaking door gasket is often a contributing factor to igniter failure.

Troubleshooting Igniters:

Igniter failure can be verified on one of three ways. The easiest and most common way to see if the igniter is working is to start your stove or grill and visually look for the orange glow; however, some appliances do not have a visual way to do this, so you may have to physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. If you can see the glow or can feel the heat from the igniter, chances are that the igniter is actually working. If this is the case, retry the startup process. Make sure your burn pot is seated correctly if it is removable. Make sure that your ash pan, door or hopper lid is closed as this will provide an airtight seal on the stove, which most igniters will require for proper ignition. If you still do not have any luck, give the stove a good cleaning, including the vent, and try again. If these attempts fail, further troubleshooting will be required, which leads us to the third method.

For this method, you will need a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. While you are taking the igniter out, verify that it is installed correctly with the correct mounting equipment, screws, etc.. With the igniter removed from the stove, you will need to look over the part to find the rated watts, it’s usually stamped on the metal somewhere. If you cannot find it, look on our website for the correct igniter; the information you are looking for will be under “technical specs”

If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%), it’s good. If the igniter has a “contained short” or a short within itself and not grounding out, your Ohms reading will be very low...usually in the single digits. Generally, you cannot have a faulty igniter with too high of a resistance reading unless an igniter is installed that is way out of spec. An example of this would be your stove requires a 300W igniter but the stove has a 250W igniter installed. The reading in this scenario would be 52Ω. The reading would be correct to the igniter but would be the wrong value for the specified 300W igniter. That’s why it’s usually good to look at the part itself for the watts rating.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 13 reviews
100%
(13)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Connie H.
Quick service!

Stove & Grill Parts for Less always gets the parts shipped quickly and we receive our orders in a timely manner even though we live across the country.

G
Gary K.

o

D
David P.
excellent service

Part was the correct unit and was received really fast which had my pellet stove up and running in quick order thanks

W
William T.
Awesome

Home Run!

R
Randy W.
Ignitor

Got the pellet ignitor quicker than expected, thank you. Now to install it.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • What is the length of the $99.00 igniter?

    From where the wires go into the heating element, the ignitor is 4-3/4" long.

Customer Reviews

Based on 13 reviews
100%
(13)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Connie H.
Quick service!

Stove & Grill Parts for Less always gets the parts shipped quickly and we receive our orders in a timely manner even though we live across the country.

G
Gary K.

o

D
David P.
excellent service

Part was the correct unit and was received really fast which had my pellet stove up and running in quick order thanks

W
William T.
Awesome

Home Run!

R
Randy W.
Ignitor

Got the pellet ignitor quicker than expected, thank you. Now to install it.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid