Skip to main content
Skip to main content
Product title:

Englander Recessed Hopper Lid Latch: PU-62-40-151-3-AMP

Product rating:
Product price:
$14.99

A $10.00 Savings over the OEM

Product SKU ! PU-62-40-151-3-AMP
Product MPN ! PU-62-40-151-3
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $39.98

Description

Recessed Englander Hopper Lid Latch. 

The seals around the top of the pellet hopper are important for the safe and efficient operation of the unit. 

  • For all pellet units manufactured 2002 and later.
  • For units manufactured prior to 2002, see Part Number PU-103-50.

(NOTE: Also for pellet grill/smokers with PG100 in the model number)

Sold individually, If you are replacing both, order two (2).

Important: Hopper Lid Latches must be checked periodically and kept tight, in order to seal the top and prevent burn-back.

The latches installed on these units are designed to pull the hopper lid tight against this seal. Over the course of operation as these seals "wear in" and compress, the tension of the latches should be tested periodically, and adjusted if necessary. To adjust the lid latches, the following tools will be needed: two ½” open-ended wrenches. In order to adjust the latch, first open the hopper lid and then lock the latch in its closed position. Then take the ½” wrench and loosen the nut closest to the latch. This nut is then adjusted closer to the lid itself to tighten the latch. After tightening the latches, test the latches for proper tension by locking the lid down and lifting each front corner of the lid. The lid should be firmly held down by the latches. Repeat the same procedure if the latch is still not tight enough. Hopper lid should be seated firmly against the gasket with no detectable movement up or down. Check by pushing down and pulling up on lid.


Replacement For Part Numbers:

  • PU-62-40-151-3
  • 31280

View Compatible Models

Compatible Models

    Englander

  • 10-CDV
  • 10-CPM
  • 25-CAB80
  • 25-CBEP
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PUF

Technical Specs

Tools required Two-1/2" open face wrenches

Videos

Instructions

Install Instructions For Englander Recessed Hopper Lid Latch: PU-62-40-151-3-AMP

Important: Hopper Lid Latches must be checked periodically and kept tight, in order to seal the top and prevent burn-back.

The latches installed on these units are designed to pull the hopper lid tight against this seal. Over the course of operation as these seals "wear in" and compress, the tension of the latches should be tested periodically, and adjusted if necessary. To adjust the lid latches, the following tools will be needed: two ½” open-ended wrenches. In order to adjust the latch, first open the hopper lid and then lock the latch in its closed position. Then take the ½” wrench and loosen the nut closest to the latch. This nut is then adjusted closer to the lid itself to tighten the latch. After tightening the latches, test the latches for proper tension by locking the lid down and lifting each front corner of the lid. The lid should be firmly held down by the latches. Repeat the same procedure if the latch is still not tight enough. Hopper lid should be seated firmly against the gasket with no detectable movement up or down. Check by pushing down and pulling up on lid.

Troubleshooting

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Recessed Englander Hopper Lid Latch. 

The seals around the top of the pellet hopper are important for the safe and efficient operation of the unit. 

  • For all pellet units manufactured 2002 and later.
  • For units manufactured prior to 2002, see Part Number PU-103-50.

(NOTE: Also for pellet grill/smokers with PG100 in the model number)

Sold individually, If you are replacing both, order two (2).

Important: Hopper Lid Latches must be checked periodically and kept tight, in order to seal the top and prevent burn-back.

The latches installed on these units are designed to pull the hopper lid tight against this seal. Over the course of operation as these seals "wear in" and compress, the tension of the latches should be tested periodically, and adjusted if necessary. To adjust the lid latches, the following tools will be needed: two ½” open-ended wrenches. In order to adjust the latch, first open the hopper lid and then lock the latch in its closed position. Then take the ½” wrench and loosen the nut closest to the latch. This nut is then adjusted closer to the lid itself to tighten the latch. After tightening the latches, test the latches for proper tension by locking the lid down and lifting each front corner of the lid. The lid should be firmly held down by the latches. Repeat the same procedure if the latch is still not tight enough. Hopper lid should be seated firmly against the gasket with no detectable movement up or down. Check by pushing down and pulling up on lid.


Replacement For Part Numbers:

  • PU-62-40-151-3
  • 31280

View Compatible Models

Technical Specs

Tools required Two-1/2" open face wrenches

Instructions

Assembly Instructions For Englander Recessed Hopper Lid Latch: PU-62-40-151-3-AMP

Important: Hopper Lid Latches must be checked periodically and kept tight, in order to seal the top and prevent burn-back.

The latches installed on these units are designed to pull the hopper lid tight against this seal. Over the course of operation as these seals "wear in" and compress, the tension of the latches should be tested periodically, and adjusted if necessary. To adjust the lid latches, the following tools will be needed: two ½” open-ended wrenches. In order to adjust the latch, first open the hopper lid and then lock the latch in its closed position. Then take the ½” wrench and loosen the nut closest to the latch. This nut is then adjusted closer to the lid itself to tighten the latch. After tightening the latches, test the latches for proper tension by locking the lid down and lifting each front corner of the lid. The lid should be firmly held down by the latches. Repeat the same procedure if the latch is still not tight enough. Hopper lid should be seated firmly against the gasket with no detectable movement up or down. Check by pushing down and pulling up on lid.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Donald T.
Perfect fit!

Got exactly the right part the first time, very quick shipping!

L
L D.
Well pleased.

Ordered my parts. Got a email with in an hour that they were working on my order. Same day said it was shipped. Got it in 3 days. Fit perfect installed them in 10 mins. Very good company to order from. Second time I have used them for my pellet stove parts.

j
jessie
Hopper latches

They fit perfect

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Donald T.
Perfect fit!

Got exactly the right part the first time, very quick shipping!

L
L D.
Well pleased.

Ordered my parts. Got a email with in an hour that they were working on my order. Same day said it was shipped. Got it in 3 days. Fit perfect installed them in 10 mins. Very good company to order from. Second time I have used them for my pellet stove parts.

j
jessie
Hopper latches

They fit perfect