Englander PU-076002B Combustion Blower With Housing, AMP 20061 - Stove Parts 4 Less
Click image to enlarge

Englander PU-076002B Combustion Blower With Housing, AMP 20061


Price: $139.99
In Stock

This item is in stock and ready to ship!

SKU: AMP20061
MPN: PU-076002B

Description

Combustion Exhaust Blower for Englander Stoves: PU-076002B

The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Our pellet stove exhaust blower comes with the complete assembly with gasket and pipe adaptor, and mounts securely in place of your existing blower.
This blower comes with everything you need for installation including wire leads that make installation a breeze.
This replacement exhaust blower is not compatible with Englander model 25-PUF or the Englander 10-CPM multi-fuel stove, so make sure to check your stove's model number before ordering.

 

Combustion Exhaust Blower Features

  • 85 CFM Blower
  • Replaces existing combustion exhaust blower on Englander pellet stoves
  • Complete assembly with gasket and pipe adapter included
  • Includes wire leads for fast "plug and play" installation
  • Includes detailed step-by-step installation instructions
  • Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove
  • Includes pipe adapter (adapter was formerly Part # CA-1598).

Instructions For Replacing The Blower

To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket (Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. If cleaning your blower, the blower impeller, blower tube and steel blower exhaust tube on the unit should be brushed and vacuumed. However, if you must remove or replace the entire Combustion Blower, a new blower flange gasket (Part # PU-CBG) should be added between the blower flange and the steel exhaust tube.

Technical Specs

Volts 115
Cycles 60 Hz
Amps 0.28
Rpms 3000

Compatible Stoves

    Englander

  • 25-PDV
  • 25-PDVC
  • 25-PDVE
  • 25-PI
  • 25-EP
  • 25-EPI
  • 25-PAH
  • 25-IP
  • 25-IPM
  • 25-IPS
  • 25-PAF
  • 55-SHP22
  • 55-SHP20
  • 55-TRP22
  • 55-TRP20
  • 55-SHP22L
  • 55-SHP10
  • 55-SHP10L
  • American Standard
  • American Heritage
  • 55-TRP10
  • 55-SHPEPI
  • 55-SHPEP
  • 55-TRPEPI
  • 55-TRPEP
  • 55-SHPEPIL
  • 55-SHPEPL
  • 55-SHPEP
  • 55-SHPAH
  • 55-SHPAHL
  • 55-TRPAH
  • 55-SHPIP
  • 55-SHPIPL
  • 55-SHPIPM
  • 55-SHPIPS
  • 55-TRPIP
  • 55-TRPIPM
  • 55-TRPIPS
  • 55-SHP15
  • 55-SHP25
  • 55-TRP25

Warranty

Unfortunately sometimes products do not work like they are supposed to. We offer a 12 month warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Click here to submit a warranty claim for this item.

Instructional Videos

Volts 115
Cycles 60 Hz
Amps 0.28
Rpms 3000

Description

Combustion Exhaust Blower for Englander Stoves: PU-076002B

The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Our pellet stove exhaust blower comes with the complete assembly with gasket and pipe adaptor, and mounts securely in place of your existing blower.
This blower comes with everything you need for installation including wire leads that make installation a breeze.
This replacement exhaust blower is not compatible with Englander model 25-PUF or the Englander 10-CPM multi-fuel stove, so make sure to check your stove's model number before ordering.

 

Combustion Exhaust Blower Features

  • 85 CFM Blower
  • Replaces existing combustion exhaust blower on Englander pellet stoves
  • Complete assembly with gasket and pipe adapter included
  • Includes wire leads for fast "plug and play" installation
  • Includes detailed step-by-step installation instructions
  • Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove
  • Includes pipe adapter (adapter was formerly Part # CA-1598).

Instructions For Replacing The Blower

To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket (Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire Combustion Blower. If cleaning your blower, the blower impeller, blower tube and steel blower exhaust tube on the unit should be brushed and vacuumed. However, if you must remove or replace the entire Combustion Blower, a new blower flange gasket (Part # PU-CBG) should be added between the blower flange and the steel exhaust tube.

Technical Specs

Volts 115
Cycles 60 Hz
Amps 0.28
Rpms 3000

Compatible Stoves

    Englander

  • 25-PDV
  • 25-PDVC
  • 25-PDVE
  • 25-PI
  • 25-EP
  • 25-EPI
  • 25-PAH
  • 25-IP
  • 25-IPM
  • 25-IPS
  • 25-PAF
  • 55-SHP22
  • 55-SHP20
  • 55-TRP22
  • 55-TRP20
  • 55-SHP22L
  • 55-SHP10
  • 55-SHP10L
  • American Standard
  • American Heritage
  • 55-TRP10
  • 55-SHPEPI
  • 55-SHPEP
  • 55-TRPEPI
  • 55-TRPEP
  • 55-SHPEPIL
  • 55-SHPEPL
  • 55-SHPEP
  • 55-SHPAH
  • 55-SHPAHL
  • 55-TRPAH
  • 55-SHPIP
  • 55-SHPIPL
  • 55-SHPIPM
  • 55-SHPIPS
  • 55-TRPIP
  • 55-TRPIPM
  • 55-TRPIPS
  • 55-SHP15
  • 55-SHP25
  • 55-TRP25

Warranty

Unfortunately sometimes products do not work like they are supposed to. We offer a 12 month warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Click here to submit a warranty claim for this item.

Instructional Videos

QUESTIONS & ANSWERS

Ask a Question
  • Will this part fit a 2006 New England 25 pdv? Looks exactly like it

    Yes.

  • Hi does this blow have the blower fins already attached or do I have to use old fins. My old fins have several fins broke off from cleaning ashes out of exhaust.

    Hi there,
    This blower is the complete assembly. It will have the impeller already attached.

  • Will this fit 25-pdv made in year 1994

    Yes, This blower is a compatible replacement to the OEM from englander for that year and model of Englander pellet stove.

Customer Reviews

Based on 19 reviews Write a review