Skip to main content
Product title:

Breckwell Combustion Blower Assembly: A-E-028

Product rating:
Product price:
$399.99
Product SKU ! A-E-028
Product MPN ! A-E-028
Only 2 Left In Stock
Bullet point features

Pay over time with Affirm.

Have a Question? Contact Us 24/7 to Ask a Specialist

Frequently Bought Together

Parts other customers added to their cart along with this one. Untick any you do not need, then add the rest together.

Description

Breckwell Multi-Fuel/Pellet Stove OEM Combustion Blower (W/ Housing). The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove. It is important that the blower functions properly. If the blower is not running as it should, smoke/flue gas may enter the room. You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire.

Notes: Fits: SP6000 Heartland Units Pre 2013.  Please check your manual to confirm compatibility.

*Includes gasket*

UPC: 083877000281

Replacement For Part Number:

  • A-E-028

Compatible Models

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Breckwell

Technical Specs

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Voltage 115
Power type AC
RPM (Rotations/Minute) 3000
Frequency (Hz) 60
Wire Connectors One Male & One Female Spade

Instructions

Install Instructions For Breckwell Combustion Blower Assembly: A-E-028

Instructional Documents

Instructional Notes

  1. Unplug the unit.
  2. Remove the rear & side panel.
  3. Locate the exhaust blower and disconnect the venting (There is a transitional vent adapter that sits between the combustion blower housing and the vent pipe. If you are replacing the exhaust blower assembly and you don't have this adapter, the one from the previous blower will need to be reused. This connection must be sealed with a high-temperature silicone).
  4. Disconnect the wiring attached to the leads coming off the old motor.
  5. Loosen the bolts holding the blower housing to the unit and remove the old blower assembly.
  6. Position the new blower assembly and gasket in place.
  7. Reposition and tighten the previously removed bolts.
  8. Reconnect the wire leads.
  9. Reconnect the flange (If previously removed) and venting.
  10. Rinstall anay previusly removed panells.
  11. Plug in the unit and test the blower.

Troubleshooting

Troubleshooting Notes

-The exhaust blower is responsible for removing smoke from the unit and pulling combustion air into the stove. If you notice a lazy flame when your stove is burning or smell smoke you should shut down the stove.

-Carefully inspect all gaskets, clean the stove/venting, and inspect the area around the combustion blower.

-If all gaskets are sealing properly and the stove/venting is clean, the combustion blower may need to be replaced.

Customers Also Bought

Parts that customers who bought this one also ordered, the most popular first.

  • SKU
    MPN
    CLEAR-GM-3OZ
    76CT
    $9.99
    500 Degree RTV Clear Silicone Sealant Gasket Maker 3oz

    500 Degree RTV Clear Silicone Sealant Gasket Maker 3oz

    Replaces 76CT
  • SKU
    MPN
    PP3101
    910-142
    $29.99
    Regency Low Limit Heat Sensor (110°F): 910-142-AMP

    Regency Low Limit Heat Sensor (110°F): 910-142-AMP

    Normally Open: 90°/110° Replaces 910-142
  • SKU
    C-G-101
    $8.99
    Breckwell Exhaust Blower Gasket: C-G-101

    Breckwell Exhaust Blower Gasket: C-G-101

  • SKU
    MPN
    SPFL-465-OIL
    PP5400
    $19.99
    Stove Parts For Less Synthetic Bearing Oil

    Stove Parts For Less Synthetic Bearing Oil

    1.7 fl. oz / 50 ml Replaces PP5400
  • SKU
    C-E-015-AMP
    $89.99
    Breckwell Stir Rod: C-E-015-AMP

    Breckwell Stir Rod: C-E-015-AMP

    1 RPM CW 110V / 0.72A
  • SKU
    706N (BRE)
    $99.99
    Breckwell (Multi-Fuel) Stove 4 RPM (CW) Agitator/Drive Motor: 80456-AMP

    Breckwell (Multi-Fuel) Stove 4 RPM (CW) Agitator/Drive Motor: 80456-AMP

    4 RPM CW Rotation 4 RPM CW
  • SKU
    88106 (BRE)
    $8.99
    Breckwell Distribution Blower Gasket: 88106

    Breckwell Distribution Blower Gasket: 88106

  • SKU
    PP3101(BRE)
    $29.99
    Breckwell Low Limit Heat Sensor 110°F: 80381-AMP

    Breckwell Low Limit Heat Sensor 110°F: 80381-AMP

    Normally Open: 90°/110° Replaces 80381
  • SKU
    SP4L-80472 (BRE)
    $179.99
    Breckwell Distribution Blower: 80472-AMP

    Breckwell Distribution Blower: 80472-AMP

    115V / 1.35A 2000 RPM
  • SKU
    C-E-046-N
    $3.99
    Breckwell Fuse Fits Most Models, 5A 125V: C-E-046-N

    Breckwell Fuse Fits Most Models, 5A 125V: C-E-046-N

    125V / 5A
  • SKU
    88106-SILICONE (BRE)
    $9.99
    Breckwell (Pellet Stove) Distribution Blower Gasket (Silicone): 88106-S

    Breckwell (Pellet Stove) Distribution Blower Gasket (Silicone): 88106-S

    Dimensions 4 7/8'' x 4''
  • SKU
    80390 (BRE) AMP
    $24.99
    Breckwell Pellet Stove (170 Degree) High Limit Snap Disc: 80390-AMP

    Breckwell Pellet Stove (170 Degree) High Limit Snap Disc: 80390-AMP

    150°/170° Bakelite

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for special parts may take up to 4 weeks for processing, and customers are responsible for return shipping charges.

Shipping Information

This Item Is Ineligible For Free Shipping

When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Learn More About Our Shipping Information

Questions & Answers

If your question does not concern this part, contact us directly or read our FAQs.

No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.

Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Still have a question?

Call or email us and we will help you find the right part.

Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQs

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)