Skip to main content
Skip to main content
Product title:

Comfort Bilt Room Temperature Sensor Wire: CB-THERMOSTATWIRE-AMP

Product rating:
Product price:
Sold out
$24.99

A $5.00 Savings over the OEM

Product SKU ! CB-THERMOSTATWIRE-AMP
Product MPN ! CB-THERMOSTATWIRE
Bullet point features
Product Out Of Stock

We are expecting 10+ to arrive on or around Jun 06, 2025

We are also expecting 10+ more to arrive on or around 8/31/2025

Sign up for a one-time notification below!

Frequently Bought Together

Description

ComfortBilt Pellet Stove Room Temperature Sensor (Thermostat) Wire.  The purpose of this wire is to sense the ambient air temperature around the unit. (This may differ from the temperature that is felt in other parts of the room). When the stove is set to "temperature mode", this wire allows the unit to adjust the feed rate in an attempt to match the temperature set on the stove.  It does this by raising or lowering the current heat level setting.  The stove does not shut down when desired temp is reached.  It will default to heat level 1 and maintain a slow, steady fire.

 




Replacement For Part Numbers:

  • CB-THERMOSTATWIRE
  • TempSenseWire

View Compatible Models

Compatible Models

    ComfortBilt

  • HP21
  • HP22
  • HP22I
  • HP22N
  • HP41
  • HP42
  • HP50
  • HP50GC
  • HP55
  • HP61

Technical Specs

Wire Length 40"

Instructions

Install Instructions For Comfort Bilt Room Temperature Sensor Wire: CB-THERMOSTATWIRE-AMP

Installation Instructions:

1.) Start off by removing the side panel closest to the Temperature Sensor Wire.

2.) Follow the Sensor Wire back to the connection located on the board and disconnect it.

3.) Remove the old Temperature Sensor Wire (Pay special attention to the route this wire follows on its way to the back panel of the stove).

4.) Plug in the connector for the new sensor and reroute the wire to follow the same path the old sensor was traveling.

5.) Reinstall the side panel.

See page 5 of ComfortBilts Guide to Components for more details!

Troubleshooting

Helpful Tips:

The temperature sensor reads the ambient air temperature close to the stove. The reading it shows may differ from the temperature that is felt in other parts of the room. Customers sometimes think there is an issue with the sensor because it does not read the same temp as their home thermostat. Often this temperature difference is a result of normal variation in temp in different parts of the room/home. In these situations, the probe is usually functioning as it should and does not need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

ComfortBilt Pellet Stove Room Temperature Sensor (Thermostat) Wire.  The purpose of this wire is to sense the ambient air temperature around the unit. (This may differ from the temperature that is felt in other parts of the room). When the stove is set to "temperature mode", this wire allows the unit to adjust the feed rate in an attempt to match the temperature set on the stove.  It does this by raising or lowering the current heat level setting.  The stove does not shut down when desired temp is reached.  It will default to heat level 1 and maintain a slow, steady fire.

 




Replacement For Part Numbers:

  • CB-THERMOSTATWIRE
  • TempSenseWire

View Compatible Models

Technical Specs

Wire Length 40"

Instructions

Install Instructions For Comfort Bilt Room Temperature Sensor Wire: CB-THERMOSTATWIRE-AMP

Installation Instructions:

1.) Start off by removing the side panel closest to the Temperature Sensor Wire.

2.) Follow the Sensor Wire back to the connection located on the board and disconnect it.

3.) Remove the old Temperature Sensor Wire (Pay special attention to the route this wire follows on its way to the back panel of the stove).

4.) Plug in the connector for the new sensor and reroute the wire to follow the same path the old sensor was traveling.

5.) Reinstall the side panel.

See page 5 of ComfortBilts Guide to Components for more details!

Troubleshooting

Helpful Tips:

The temperature sensor reads the ambient air temperature close to the stove. The reading it shows may differ from the temperature that is felt in other parts of the room. Customers sometimes think there is an issue with the sensor because it does not read the same temp as their home thermostat. Often this temperature difference is a result of normal variation in temp in different parts of the room/home. In these situations, the probe is usually functioning as it should and does not need to be replaced.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Terry V.

Comfort Bilt Room Temperature Sensor Wire: CB-THERMOSTATWIRE-AMP

J
Joseph D.
Thermo stat wire

Exactly what I needed to fix my pellet stove. Thank you.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Terry V.

Comfort Bilt Room Temperature Sensor Wire: CB-THERMOSTATWIRE-AMP

J
Joseph D.
Thermo stat wire

Exactly what I needed to fix my pellet stove. Thank you.

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid