Harman Log Frame Bracket: 1-00-674097-AMP

This bracket is mounted inside the door lip of the insert. There should already be two Allen-key screws inside your insert which you can use to mount the log bracket.

**Note:** When performing routine maintenance, the log bracket needs to be removed to access the removable panels inside of the insert. The allen key screws can be replaced with two (2) wing screws so that no tools are required for future maintenance. Wing screws part # 3-31-782108

Advance will require log bracket kit # 1-00-06677 which mounts to the inside of the stove door. Hardware for this bracket is included with the bracket.

UPC: 652174546824

Replacement For Part Number:

• 1-00-674097

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Harman Log Frame Bracket: 1-00-674097-AMP

Instructional Documents

• Install Instructions PDF for Harman 1-00-674097

Instructional Notes

Installation Instructions:

• Step 1: With the stove off and cool, open the front door. Using the hex key wrench, remove the two button head screws located just inside the door opening.
• Step 2: Position the log bracket over the threaded holes and secure with the wing screws provided in the kit. (The wing screws are used so that no special tools are needed for regular cleaning.)
• Step 3: Lay the log on the bracket with the long straight log closest to the bottom of the stove and the branches reaching over the burn pot. (Figure 3 & 4)
• Step 4: Close the door and latch securely. The unit is now ready for burning. 

This Item Qualifies For Free Shipping With Orders Over $99!