Harman Accentra 52i TC Pellet Stove Repair and Replacement Parts

This 306 Watt igniter is compatible with all automatic ignition Harman except those which use a pressurized ignition system. Note: This igniter w...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin..works with all Harman models listed. View our...

This flame guide replacement part is compatible with the following Harman stoves: -Accentra Insert, XXV, P35i, P43, P68, HF60, 52i, P43, Absolute43...

Replacement distribution (convection) blower for Harman Pellet Stoves that use Part# 3-21-33647. This blower is mounted without a gasket in all app...

Replacement Flame Guide for Harman Stoves. Measurements: 6-1/4" to 3-1/2" x 4-1/8. Replaces Old Harman part number 3-00-674069. The flame guide is...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

Replacement silicone docking gasket for all Harman pellet stove inserts. Older versions of this gasket were red in color, this is the replacement f...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

One Replacement 1/4" screw post with washer. These are the screws that attach the glass hopper lid to the hinges. If you can hear a "whistle" from ...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

Replacement 1/4-20 X 5/8 thumb screw / wingscrew for Harman stoves. Used on most pellet stoves to hold the cleanout cover on the burnpot. Each stov...

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

Harman gasket, tadpole/bulb style with PSA self-adhesive. Gasket is 1 1/2" x 1/2" x 5 feet long.  

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

Harman Distribution Blower for many units, see our stove compatibility tab. The distribution blower is also known as the room air blower or convect...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This decorative ceramic log is an optional item often sold with the purchase of a new stove or insert but is not required to operate the stove.

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications...

Ceramic plate overfire replacement gasket for Harman pellet stoves, inserts, and boilers that utilize a burn pot with primary air inlets that over ...

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications ...

Harman Accentra, XXV 52i & Accentra Insert Glass Gasket Replacement glass gasket for Harman stoves. 3/16 x 10' with PSA self adhesive. Harman ...

Set of four screws and clips for securing the door glass into the following units: Accentra Insert, Accentra, 52i, P35i, P38, P43, P61, P61A, P68, ...

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications...

This Wooden Handle(with bolt) is for the following stove models: Accentra Insert, Accentra, Accentra 52i  P35i,P43,P61,P61A, PC45 P38 (post serial...

This igniter cradle has an adjustable depth and is the most recent design from Harman for their finned ignition system. This cradle can be used any...

Replacement Door Glass for all Harman Accentra 52i Insert and XXV Pellet Stoves. Measures 3/16" thick x 12 3/16" wide x 17 1/8" wide with cut-off c...

This 5 Amp, 20mm control board fuse is located on the backside of your Harman Stove Circuit board. All units made after 2013, with controllers Revi...

HARMAN WIRELESS ROOM SENSOR THERMOSTAT Fits Models:  Absolute43, Absolute63, Allure50, XXV-TC, and Accentra Insert 52i-TC Harman Wireless Room Sens...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

Harman Accentra cast iron medallion with decorative compass for the Harman Accentra Insert, Accentra 52i, and the Accentra 52i-TC. This part is con...

This Harman Burnpot, part # 1-00-574605, is the most current revision (2020) for the Accentra52i Insert brand, to include both the 52i and the 202...

This Touch Up Paint is a fast-drying, exact color match for the popular Majolica Brown color used for cast iron enamel finishes in the Harman Pelle...

Service Rail Kit Used To Service & Maintain Your Pellet Stove. Includes 2 Service Rails, Hardware, and Scissor Assembly. Designed to be used wi...