Skip to main content
Skip to main content
Product title:

Breckwell Exhaust Blower: A-E-027-AMP

Product rating:
Product price:
$99.99

A $200.00 Savings over the OEM

Product SKU ! SP4L-101-2
Product MPN ! A-E-027
Product availability: In Stock
Bullet point features
"It was easy to install and works great. I also noticed that it's a lot quieter than the one I had whose bearings were apparently going and gettin a little roudy! Good Price, fast delivery. "-Mame M.

Frequently Bought Together

Description

Breckwell Pellet Stove Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  It is important that the blower functions properly.  If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire. 

    Install Note: This blower comes wired with one male and one female wire lead. If you require two female leads, convert the male lead with the female to female connector. If you require two male leads, convert the female lead with the male to male connector.


      Replacement For Part Numbers:

      • A-E-027
      • 80641

      View Compatible Models

      UPC: 012685000985

      Compatible Models

        Breckwell

      • P1000 Big E
      • P2000 Tahoe
      • P22 Maverick
      • P22I Maverick Insert
      • P23 Sonora
      • P23I Sonora Insert
      • P24 Blazer
      • P24I Blazer Insert
      • P26 Cadet
      • P2700 Mojave
      • P32i Cadet
      • P4000 Classic Cast
      • P7000 Solstice

      Technical Specs

      Volts 115
      Cycles 60Hz
      Amps 1.6
      RPM 3000

      Instructions

      Install Instructions For Breckwell Exhaust Blower: A-E-027-AMP

      To replace the exhaust blower:


      1. Unplug the unit
      2. Open the service panel
      3. Locate the exhaust blower. If your unit has the original OEM blower, you may have to remove the entire blower assembly if the motor cannot be removed from the hub. This will also involve removing the vent from the end of the assembly. If you have a Breckwell Insert, you will need to remove the entire off-set assembly from the of blower assembly and attach it to the new assembly if you have a hub-less motor.
      4. Disconnect wiring
      5. Replace blower assembly along with any gaskets that were disturbed (included).
      6. Reconnect venting if it was disconnected
      7. Reattach the wiring
      8. NOTE: if the venting was removed, make sure to apply RTV silicone to the venting adapter and secure with a single self tapping screw.

      Troubleshooting


      Warranty

      Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

      Shipping Information

      This Item Qualifies For Free Shipping With Orders Over $99!

      When Will My Order Ship?

      All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

      Do You Offer Express Shipping?

      Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

      How Does Free Shipping Work?

      Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

      Do You Ship To Canada?

      We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

      Do You Ship To Alaska Or Hawaii?

      We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

      Do You Ship Outside The US Or Canada?

      Unfortunately, at this time we do not offer international shipping other than to Canada.

      Shipping Time Estimations

      For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

      Learn More About Our Shipping Information
      Jump back to product information tab navigation

      Description

      Breckwell Pellet Stove Exhaust Blower.  The exhaust blower is responsible for drawing smoke out of the unit and pulling combustion air into the stove.  It is important that the blower functions properly.  If the blower is not running as it should, smoke/flue gas may enter the room.  You may also notice a lazy flame and a poor burn as a result of inadequate combustion air being delivered to the fire. 

        Install Note: This blower comes wired with one male and one female wire lead. If you require two female leads, convert the male lead with the female to female connector. If you require two male leads, convert the female lead with the male to male connector.


          Replacement For Part Numbers:

          • A-E-027
          • 80641

          View Compatible Models

          UPC: 012685000985

          Compatible Models

            Breckwell

          • P1000 Big E
          • P2000 Tahoe
          • P22 Maverick
          • P22I Maverick Insert
          • P23 Sonora
          • P23I Sonora Insert
          • P24 Blazer
          • P24I Blazer Insert
          • P26 Cadet
          • P2700 Mojave
          • P32i Cadet
          • P4000 Classic Cast
          • P7000 Solstice

          Technical Specs

          Volts 115
          Cycles 60Hz
          Amps 1.6
          RPM 3000

          Instructions

          Install Instructions For Breckwell Exhaust Blower: A-E-027-AMP

          To replace the exhaust blower:


          1. Unplug the unit
          2. Open the service panel
          3. Locate the exhaust blower. If your unit has the original OEM blower, you may have to remove the entire blower assembly if the motor cannot be removed from the hub. This will also involve removing the vent from the end of the assembly. If you have a Breckwell Insert, you will need to remove the entire off-set assembly from the of blower assembly and attach it to the new assembly if you have a hub-less motor.
          4. Disconnect wiring
          5. Replace blower assembly along with any gaskets that were disturbed (included).
          6. Reconnect venting if it was disconnected
          7. Reattach the wiring
          8. NOTE: if the venting was removed, make sure to apply RTV silicone to the venting adapter and secure with a single self tapping screw.

          Troubleshooting


          Warranty

          Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

          Shipping Info

          This Item Qualifies For Free Shipping With Orders Over $99!

          When Will My Order Ship?

          All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

          Do You Offer Express Shipping?

          Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

          How Does Free Shipping Work?

          Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

          Do You Ship To Canada?

          We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

          Do You Ship To Alaska Or Hawaii?

          We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

          Do You Ship Outside The US Or Canada?

          Unfortunately, at this time we do not offer international shipping other than to Canada.

          Shipping Time Estimations

          For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

          Learn More About Our Shipping Information

          Customer Reviews

          Based on 280 reviews
          97%
          (272)
          3%
          (8)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          G
          Gary W.

          Drop in just fine

          B
          Bonnie H.
          Exhaust blower Motor

          Very pleased with purchase. Delivery was awesome.Keep up the good work!

          R
          Richard B.
          service and fast response.

          Received the motor the very next day. Could not be any happier.

          J
          Jess J.
          Big savings

          Well packaged. Exact fit. Best price.

          C
          Christian S.
          Exhaust Fan

          Works great. It's hotter than Hell in my house right now. LOL

          123

          QUESTIONS & ANSWERS

          If your question does not concern this specific product, use our contact form
          Ask a Question

          • How do you know if you need a blower motor?where do you find the model#&Mine is making a noise like a loud freight train.&keeps shutting off even though it's clean.

            Hi,
            If your stove flame is lazy and not the usual explosive flame, then that would be a good indication that the exhaust/combustion blower is failing.
            You can find the model of your stove by looking on the rating plate, usually on the back of the stove or on the underside of the hopper lid. The rating plate is also where you will find the serial number.

          • What is the pal size ? 4 3/4 ou 5inch to the exast fan on the brecwell big e because i need that ???

            4 3/4" is the standard impeller size, here's a link.

          • Does this include the gasket? Some pictures show it some don’t

            All combustion blowers/ motors are shipped with a new gasket.

          Customer Reviews

          Based on 280 reviews
          97%
          (272)
          3%
          (8)
          0%
          (0)
          0%
          (0)
          0%
          (0)
          G
          Gary W.

          Drop in just fine

          B
          Bonnie H.
          Exhaust blower Motor

          Very pleased with purchase. Delivery was awesome.Keep up the good work!

          R
          Richard B.
          service and fast response.

          Received the motor the very next day. Could not be any happier.

          J
          Jess J.
          Big savings

          Well packaged. Exact fit. Best price.

          C
          Christian S.
          Exhaust Fan

          Works great. It's hotter than Hell in my house right now. LOL

          123
          Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid