Skip to main content
Skip to main content
Product title:

Whitfield Convection Room Air Blower: 12146109-AMP

Product rating:
Product price:
$159.99
Product SKU ! SP4L-151-1
Product MPN ! 12146109
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $179.98

Description

Replacement Convection Blower for select Whitfield Pellet Stoves. This blower pushes the warm air out of the stove and into your room. Also known as a room air blower. Made by Fasco.

Fits the following stoves:

All Advantage stoves, Profile 20/30, Optima 2/3, Quest Plus, T300P/T301P/T305P/T308P, and select Prodigy stoves such as:

  • Prodigy I - WP3 Serial number 1001 - 2281
  • Prodigy II - WP3 Serial number 1001 - 2281

    •  

    Note: Will not fit regular Quest stoves, only Quest Plus. If you aren't sure which model you have, check under the hopper lid or behind the stove.


    Replacement For Part Numbers:

    • 12146109
    • 12126109
    • 7021-7786
    • 70217786
    • 702111470
    • 7021-11470
    • 11-1220

    View Compatible Models

    Compatible Models

      Earth Stove

    • Traditions T300P

      Whitfield

    • Advantage I
    • Advantage II INS
    • Advantage II
    • Advantage II-T C
    • Advantage II-T
    • Advantage III
    • Advantage Plus FS
    • Advantage Plus INS
    • Cascade
    • Legend
    • Optima 2 FS
    • Optima 3 FS
    • Optima 3 INS
    • Prodigy 1 (1001 - 2281)
    • Prodigy 2 (1001 - 2281)
    • Profile 20 FS (7495 - 7494)
    • Profile 30 FS (11905 - 11904)
    • Profile 30 INS (11905 - 11904)
    • Quest Plus FS WP4
    • Quest Plus INS WP4
    • Traditions T300P
    • Traditions TP300
    • Traditions TP340

    Technical Specs

    RPM 3000
    Amps 1.5
    Volts 115
    Cycles 60Hz
    Wiring Connectors 1/4" Female

    Instructions

    Install Instructions For Whitfield Convection Room Air Blower: 12146109-AMP

    Replacing the SP4L-151-1 Blower in a Montage pellet stove:


    The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.


    • Locate the motor and find the four screws or nuts that secure the motor
    • Remove the screws or nuts
    • Unplug the blower from the wiring harness
    • Install new Blower to mounting post and tighten screws or nuts
    • Reconnect power

    Troubleshooting

    If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


    Current versions of the SP4L-151-1 blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in from the manufacturer that are made to the original spec that requires lubrication. This will be indicated on the listing table attached to the blower.


    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Information

    This Item Qualifies For Free Shipping With Orders Over $99!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information
    Jump back to product information tab navigation

    Description

    Replacement Convection Blower for select Whitfield Pellet Stoves. This blower pushes the warm air out of the stove and into your room. Also known as a room air blower. Made by Fasco.

    Fits the following stoves:

    All Advantage stoves, Profile 20/30, Optima 2/3, Quest Plus, T300P/T301P/T305P/T308P, and select Prodigy stoves such as:

  • Prodigy I - WP3 Serial number 1001 - 2281
  • Prodigy II - WP3 Serial number 1001 - 2281

    •  

    Note: Will not fit regular Quest stoves, only Quest Plus. If you aren't sure which model you have, check under the hopper lid or behind the stove.


    Replacement For Part Numbers:

    • 12146109
    • 12126109
    • 7021-7786
    • 70217786
    • 702111470
    • 7021-11470
    • 11-1220

    View Compatible Models

    Compatible Models

      Earth Stove

    • Traditions T300P

      Whitfield

    • Advantage I
    • Advantage II INS
    • Advantage II
    • Advantage II-T C
    • Advantage II-T
    • Advantage III
    • Advantage Plus FS
    • Advantage Plus INS
    • Cascade
    • Legend
    • Optima 2 FS
    • Optima 3 FS
    • Optima 3 INS
    • Prodigy 1 (1001 - 2281)
    • Prodigy 2 (1001 - 2281)
    • Profile 20 FS (7495 - 7494)
    • Profile 30 FS (11905 - 11904)
    • Profile 30 INS (11905 - 11904)
    • Quest Plus FS WP4
    • Quest Plus INS WP4
    • Traditions T300P
    • Traditions TP300
    • Traditions TP340

    Technical Specs

    RPM 3000
    Amps 1.5
    Volts 115
    Cycles 60Hz
    Wiring Connectors 1/4" Female

    Instructions

    Install Instructions For Whitfield Convection Room Air Blower: 12146109-AMP

    Replacing the SP4L-151-1 Blower in a Montage pellet stove:


    The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.


    • Locate the motor and find the four screws or nuts that secure the motor
    • Remove the screws or nuts
    • Unplug the blower from the wiring harness
    • Install new Blower to mounting post and tighten screws or nuts
    • Reconnect power

    Troubleshooting

    If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


    Current versions of the SP4L-151-1 blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in from the manufacturer that are made to the original spec that requires lubrication. This will be indicated on the listing table attached to the blower.


    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

    Shipping Info

    This Item Qualifies For Free Shipping With Orders Over $99!

    When Will My Order Ship?

    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

    Do You Offer Express Shipping?

    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

    How Does Free Shipping Work?

    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

    Do You Ship To Canada?

    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

    Do You Ship To Alaska Or Hawaii?

    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

    Do You Ship Outside The US Or Canada?

    Unfortunately, at this time we do not offer international shipping other than to Canada.

    Shipping Time Estimations

    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

    Learn More About Our Shipping Information

    Customer Reviews

    Based on 138 reviews
    96%
    (133)
    4%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    Gordon M.
    Circulation blower order

    Awesome service as always. Friendly,knowledgeable assistance and arrived when specified. Totally satisfied!

    J
    Joe k.

    Great company to work with. Great

    P
    Peter D.

    Very good service. Good prices. I will buy more parts from you as I need them.
    Thank you.

    G
    Gregg J.
    Vogelzang Room Blower

    Great, speedy service & delivery. Simple switch out and is working like a charm, thanks!

    J
    Josie F.

    Excellent service and correct product. Never had a problem. Keep up the good work.

    123

    QUESTIONS & ANSWERS

    If your question does not concern this specific product, use our contact form
    Ask a Question

    • O see an end connector, but my stove needs individual connections. Does this come with adapters for individual wire connection hook-up?

      The aftermarket motor does not come with an adaptor. However the OEM will.

    • My Whitefield stove runs perfectly. Recently the blower circulating air into the room shut down. The auger and the other fan continued to run. After about ten minutes the convection blow came back on and continues to run. Happened a few days ago then continued to run for a few days until it happened again today. New circuit board last month. Any suggestions

      Sunlight reflecting into the sight controls (Photo-eye)?

    Customer Reviews

    Based on 138 reviews
    96%
    (133)
    4%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    Gordon M.
    Circulation blower order

    Awesome service as always. Friendly,knowledgeable assistance and arrived when specified. Totally satisfied!

    J
    Joe k.

    Great company to work with. Great

    P
    Peter D.

    Very good service. Good prices. I will buy more parts from you as I need them.
    Thank you.

    G
    Gregg J.
    Vogelzang Room Blower

    Great, speedy service & delivery. Simple switch out and is working like a charm, thanks!

    J
    Josie F.

    Excellent service and correct product. Never had a problem. Keep up the good work.

    123
    Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid