Breckwell Multi Fuel Stove SS Agitator (10" X 1/2"): A-S-MULTISTIR-AMP

Breckwell SS Multi Fuel Stove Agitator (10" X 1/2"): A-S-MULTISTIR. This stainless steel agitator rotates at timed intervals to reduce and prevent hard deposit formation in the burn pot. Replace if damaged or warped to maintain optimal stove performance.

UPC: 012685891057

Replacement For Part Numbers:

• A-S-MULTISTIR
• 891059
• 40500

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

Install Instructions For Breckwell Multi Fuel Stove SS Agitator (10" X 1/2"): A-S-MULTISTIR-AMP

Instructional Notes

1.) Disconnect the power from the unit

2.) Open the door of the stove and locate the burn pot (The agitator is a stainless steel rod that sits inside the burn pot).

3.) There is a hairpin connecting the agitator to the agitator driveshaft.  This will need to be removed.  

4.) To remove the hairpin, grab the curved end with the pliers and pull it out of position.

5.) Next, slide the agitator to the right, then lift the burn pot and agitator slightly and slide the agitator to the left.

6.) Lift the agitator and burn pot up to remove them 

7.) Once the next burn pot agitator is removed from the stove, slide the agitator so that the longest side goes all the way out. Then, lift it slightly and slide it in the opposite direction to remove. 

8.) Take the new agitator and slide the longest side of the agitator through the opening on the side of the burn pot, lay it flat, then slide it in the opposite direction.

9.) Place the burn pot and agitator in the stove with the longest end pulled slightly to the left.

10.) Once placed in the pot housing, slide the agitator to the right through the opening, then to the left (The V-shaped lip just over the opening for the igniter goes toward the stove).

11.) Match up the end of the agitator and agitator driveshaft so that they fit together.

12.) Next, insert the hairpin so the two parts are connected.

13.) Once complete, close the door, reconnect your stove to power, and check for proper operation.

Sent from my iPhone

Click here for a brief video going over agitator replacement!

This Item Qualifies For Free Shipping With Orders Over $99!