Skip to main content
Skip to main content
Product title:

ComfortBilt Pellet Stove Aftermarket Convection Blower

Product rating:
Product price:
$129.99
Product SKU ! CB CONVECTION BLOWER-AMP
Product availability: In Stock
Bullet point features

Description

Replacement universal convection blower for ComfortBilt pellet stoves. Please note: this is the blower motor only, the existing frames will need to be re-used. Compatible with most ComfortBilt pellet stoves. Comes with hardware and instructions.

Total Length: 14.5"

Air Discharge: 12" x 1.5"

 

Compatible Models

    ComfortBilt

  • HP21
  • HP22
  • HP22I
  • HP41
  • HP42
  • HP61

Technical Specs

Instructions

Install Instructions For ComfortBilt Pellet Stove Aftermarket Convection Blower

1. Unplug stove

2. Remove rear and side access panels to get to the blower mounting bracket

3. Remove blower from stove by removing the 2 or 4 (depending upon model) 10mm hex bolts that secure the mounting from into the stove.

4. Flip the frame and motor on it’s side to reveal the 6 rivets binding the blower and frame together, there are 6 rivets. Using the 7/32” drill bit provided, drill off the head of the rivet from the bottom of the mounting frame.

5. After all 6 rivets have been broken free, place something long and rigid under the motor and gently pry the motor away from the frame.

6. Save the gasket as it will be reused.

7. Pre-drill all of the mounting holes in the frame by screwing in a screw. Do all 6 and then back out the screws about ½ way and then hang your gasket from the protruding screw ends.

8. Starting in the center, align the top hole of the blower frame with the top center hole on the blower and send in the screw until the screw grabs the metal of the blower and starts to pull it down flat. Do this with the remaining screws until each screw is about 80% tight, then fasten all of the screws down tight until the blower is flush against the frame. NOTE: TIGHTENING ANY 1 SCREW PRIOR TO SETTING ALL OF THE SCREWS INTO THE BLOWER WILL SKEW THE BLOWER AND HOLES WILL NOT ALIGN, THIS SI WHY WE DO THE PARTIALLY UNTIL THEY ARE ALL SEATED.

9. The red wire that is pre-attached to the blower frame is a ground wire extension. Use this wire to connect your green ground wire which should already be attached somewhere to the stove frame.

Troubleshooting

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement universal convection blower for ComfortBilt pellet stoves. Please note: this is the blower motor only, the existing frames will need to be re-used. Compatible with most ComfortBilt pellet stoves. Comes with hardware and instructions.

Total Length: 14.5"

Air Discharge: 12" x 1.5"

 

Instructions

Install Instructions For ComfortBilt Pellet Stove Aftermarket Convection Blower

1. Unplug stove

2. Remove rear and side access panels to get to the blower mounting bracket

3. Remove blower from stove by removing the 2 or 4 (depending upon model) 10mm hex bolts that secure the mounting from into the stove.

4. Flip the frame and motor on it’s side to reveal the 6 rivets binding the blower and frame together, there are 6 rivets. Using the 7/32” drill bit provided, drill off the head of the rivet from the bottom of the mounting frame.

5. After all 6 rivets have been broken free, place something long and rigid under the motor and gently pry the motor away from the frame.

6. Save the gasket as it will be reused.

7. Pre-drill all of the mounting holes in the frame by screwing in a screw. Do all 6 and then back out the screws about ½ way and then hang your gasket from the protruding screw ends.

8. Starting in the center, align the top hole of the blower frame with the top center hole on the blower and send in the screw until the screw grabs the metal of the blower and starts to pull it down flat. Do this with the remaining screws until each screw is about 80% tight, then fasten all of the screws down tight until the blower is flush against the frame. NOTE: TIGHTENING ANY 1 SCREW PRIOR TO SETTING ALL OF THE SCREWS INTO THE BLOWER WILL SKEW THE BLOWER AND HOLES WILL NOT ALIGN, THIS SI WHY WE DO THE PARTIALLY UNTIL THEY ARE ALL SEATED.

9. The red wire that is pre-attached to the blower frame is a ground wire extension. Use this wire to connect your green ground wire which should already be attached somewhere to the stove frame.

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid