Assembly Instructions For
Comfort Bilt Pellet Stove Main Power Switch: CB MAIN SWITCH-AMP
1.) Ensure the plug is removed from the main switch.
2.) Remove the side panel closest to the switch.
3.) Remove the spade connectors that are attached to the rear of the switch (Pay special attention to the location of these wires so that can be reconnected in the same orientation.)
4.) Using a small flat head screw drive compresses the plastic clips on the side of the switch. This will allow the switch to separate from the back of the stove.
5.) Install the new switch.
6.) Reconnect the spade connectors to the back of the switch.
7.) Reinstall the side panel.
8.) Plug the main power cord into the back of the new switch.
Click on Videos to watch a short clip showing the switch location and connections.
For more detailed instructions on this switch please click here!