Skip to main content
Skip to main content
Product title:

Englander Vacuum Hose Kit: PU-VH

Product rating:
Product price:
$14.99
Product SKU ! PU-VH
Product MPN ! PU-VH
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $74.97

Description

Englander Pellet Stove Vacuum Hose Kit

Englander Pellet Stove Vacuum Pressure Hose Kit PU-VH for vacuum shut-down and firebox pressure switches. 5 feet of hose (way more than enough), includes clips. Fits ALL England's Stove Works Pellet Stoves to include: Englander, Summers Heat and Timber Ridge. This hose can be used on most any pellet stove with a vacuum switch. 

Englander's double auger pellet stoves are some of the most popular pellet stoves in the world (PDV, PDVC models). 

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon which, dries out overtime where it connects to the manifold and becomes brittle.

Air will leak around the hose and this point and the pressure switches contacts will open and trigger the error code.

This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb.

Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum shutdown switch.


Replacement For Part Number:

  • PU-VH

View Compatible Models

Compatible Models

    Englander

  • 10-CDV
  • 10-CPM
  • 25-CAB80
  • 25-CB120
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PFS
  • 25-PI
  • 25-PUF
  • 25-SSP01

Technical Specs

Length 60"
Diameter of Hole 1/4"

Videos

Instructions

Install Instructions For Englander Vacuum Hose Kit: PU-VH

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.

Troubleshooting

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Englander Pellet Stove Vacuum Hose Kit

Englander Pellet Stove Vacuum Pressure Hose Kit PU-VH for vacuum shut-down and firebox pressure switches. 5 feet of hose (way more than enough), includes clips. Fits ALL England's Stove Works Pellet Stoves to include: Englander, Summers Heat and Timber Ridge. This hose can be used on most any pellet stove with a vacuum switch. 

Englander's double auger pellet stoves are some of the most popular pellet stoves in the world (PDV, PDVC models). 

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon which, dries out overtime where it connects to the manifold and becomes brittle.

Air will leak around the hose and this point and the pressure switches contacts will open and trigger the error code.

This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb.

Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum shutdown switch.


Replacement For Part Number:

  • PU-VH

View Compatible Models

Compatible Models

    Englander

  • 10-CDV
  • 10-CPM
  • 25-CAB80
  • 25-CB120
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PFS
  • 25-PI
  • 25-PUF
  • 25-SSP01

Technical Specs

Length 60"
Diameter of Hole 1/4"

Video

Instructions

Assembly Instructions For Englander Vacuum Hose Kit: PU-VH

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.

Troubleshooting

E1 code followed by an E2 code at or during startup.

On the top or the back of the combustion blower manifold, there is a hose connected to the pressure switch. This hose is made of low-temperature silicon. Over time, the hose dries out where it connects to the manifold and becomes brittle. Air will leak around the hose and the pressure switches contacts will open and never close causing the error code. This hose is longer than it needs to be and can be cut a few times. Simply cut off about an inch or somewhere up the hose to a point that’s not brittle and reinsert the hose back on the barb. Eventually, the hose will need to be replaced. If this does not solve the problem, make sure your venting is free and clear; verify that the combustion blower is spinning…if both are true, then replace the vacuum switch.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 40 reviews
95%
(38)
5%
(2)
0%
(0)
0%
(0)
0%
(0)
J
John C.
Stove

Everything worked out great thank you

O
Onnie T.

Englander Vacuum Hose Kit: PU-VH

T
Theresa S.

Englander Pellet Stove Vacuum Hose Kit, PU-VH

C
Catherine D.

It was delivered quickly and was just what was ordered.

M
Mary A.A.
Great service

Very fast and easy to order

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question
  • Is this a high temperature vacuum hose?

    Yes, It is used to link the vacuum switch to the other components of the englander pellet stove.

  • on the vacuum switch which nipple does the air ling go on the black or gray

    Gray

Customer Reviews

Based on 40 reviews
95%
(38)
5%
(2)
0%
(0)
0%
(0)
0%
(0)
J
John C.
Stove

Everything worked out great thank you

O
Onnie T.

Englander Vacuum Hose Kit: PU-VH

T
Theresa S.

Englander Pellet Stove Vacuum Hose Kit, PU-VH

C
Catherine D.

It was delivered quickly and was just what was ordered.

M
Mary A.A.
Great service

Very fast and easy to order