Skip to main content
Skip to main content
Product title:

Englander Combustion Blower With Housing (Made By Fasco): PU-076002B-AMP

Product rating:
Product price:
$179.99

A $40.00 Savings over the OEM

Product SKU ! PU-076002B-AMP
Product MPN ! PU-076002B
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $199.98

Description

Combustion Exhaust Blower for Englander Stoves.

The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Our pellet stove exhaust blower comes with the complete assembly with gasket and pipe adaptor and mounts securely in place of your existing blower.
This blower comes with everything you need for installation including wire leads that make installation a breeze.
This replacement exhaust blower is not compatible with Englander model 25-PUF or the Englander 10-CPM multi-fuel stove, so make sure to check your stove's model number before ordering.

Combustion Exhaust Blower Features
  • 85 CFM Blower
  • Replaces existing combustion exhaust blower on Englander pellet stoves
  • Complete assembly with gasket and pipe adapter included
  • Includes wire leads for fast "plug and play" installation
  • Includes detailed step-by-step installation instructions
  • Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove
  • Includes pipe adapter (adapter was formerly Part # CA-1598).


Replacement For Part Numbers:

  • PU-076002B
  • 44271

View Compatible Models

UPC: 794909901208

Compatible Models

    Englander

  • 10-CDV
  • 25-CAB80
  • 25-CB120
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PDVE, 55-SHP22E
  • 25-PDVP
  • 25-PI
  • 25-SSP01

Technical Specs

Volts 115
Cycles 60 Hz
Amps 0.28
Rpms 3000

Instructions

Install Instructions For Englander Combustion Blower With Housing (Made By Fasco): PU-076002B-AMP

Instructions For Replacing The Blower

To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket (Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire housing. 

Troubleshooting

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Combustion Exhaust Blower for Englander Stoves.

The combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level. Our pellet stove exhaust blower comes with the complete assembly with gasket and pipe adaptor and mounts securely in place of your existing blower.
This blower comes with everything you need for installation including wire leads that make installation a breeze.
This replacement exhaust blower is not compatible with Englander model 25-PUF or the Englander 10-CPM multi-fuel stove, so make sure to check your stove's model number before ordering.

Combustion Exhaust Blower Features
  • 85 CFM Blower
  • Replaces existing combustion exhaust blower on Englander pellet stoves
  • Complete assembly with gasket and pipe adapter included
  • Includes wire leads for fast "plug and play" installation
  • Includes detailed step-by-step installation instructions
  • Not compatible with Englander model 25-PUF or 10-CPM multi-fuel stove
  • Includes pipe adapter (adapter was formerly Part # CA-1598).


Replacement For Part Numbers:

  • PU-076002B
  • 44271

View Compatible Models

UPC: 794909901208

Compatible Models

    Englander

  • 10-CDV
  • 25-CAB80
  • 25-CB120
  • 25-CBEP
  • 25-CBPAH
  • 25-EP
  • 25-EPI
  • 25-IP
  • 25-PAF
  • 25-PAH
  • 25-PDV
  • 25-PDVC
  • 25-PDVE, 55-SHP22E
  • 25-PDVP
  • 25-PI
  • 25-SSP01

Technical Specs

Volts 115
Cycles 60 Hz
Amps 0.28
Rpms 3000

Instructions

Install Instructions For Englander Combustion Blower With Housing (Made By Fasco): PU-076002B-AMP

Instructions For Replacing The Blower

To replace the Combustion (exhaust) Blower (Part # PU-076002B), the power leads and the pellet vent pipe must be disconnected. Next, remove the screws that hold the blower to the steel exhaust tube and slide the blower from the stove. Note: There is a Combustion Motor Gasket (Part # PU-CMG), which allows you to remove the motor from the Combustion Blower housing, clean your stove, and replace the motor and gasket without having to remove the entire housing. 

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 63 reviews
94%
(59)
6%
(4)
0%
(0)
0%
(0)
0%
(0)
J
JOHN C.

Great service super fast delivery 📦

V
Virgena B.
Pellet stove part

Received the part in one piece. Took a little longer than expected but it was received. Thank you.

J
Jacob R.

Englander Combustion Blower With Housing (Made By Fasco), PU-076002B-AMP

O
Owen I.

Very satisfied and fast delivery.

D
Darren A.
Totally Satisfied

Perfect fit, delivery was fast and well package.

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • Will this part fit a 2006 New England 25 pdv? Looks exactly like it

    Yes.

  • Hi does this blow have the blower fins already attached or do I have to use old fins. My old fins have several fins broke off from cleaning ashes out of exhaust.

    Hi there,
    This blower is the complete assembly. It will have the impeller already attached.

  • Will this fit 25-pdv made in year 1994

    Yes, This blower is a compatible replacement to the OEM from englander for that year and model of Englander pellet stove.

  • Will this work on a 1991 25 pfs

    yes.

  • Will this fit my Us model 5660

    Yes, but your leads on the wires will need to be switched from female to male connectors

  • Will this fit my uss pellet stove 5500

    Yes, however; the leads on the wires of the OEM blower are female and the connections of the product in question are males...you will need to make some connections. All other specs are the same.

Customer Reviews

Based on 63 reviews
94%
(59)
6%
(4)
0%
(0)
0%
(0)
0%
(0)
J
JOHN C.

Great service super fast delivery 📦

V
Virgena B.
Pellet stove part

Received the part in one piece. Took a little longer than expected but it was received. Thank you.

J
Jacob R.

Englander Combustion Blower With Housing (Made By Fasco), PU-076002B-AMP

O
Owen I.

Very satisfied and fast delivery.

D
Darren A.
Totally Satisfied

Perfect fit, delivery was fast and well package.

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid