Skip to main content
Skip to main content
Product title:

US Stove Convection/Room Blower: A-E-033A

Product rating:
Product price:
$499.99
Product SKU ! A-E-033A(USSC)
Product MPN ! A-E-033
Bullet point features

Frequently Bought Together

Total Price: $545.96

Description

USSC Pellet Stove Convection/Room Blower. This blower circulates air around the stove and across the heat exchanger.  This fan is responsible for transferring warm air into the room.  If your blower is not functioning correctly, it can greatly reduce the amount of heat you get from the stove!  If the blower is not moving the same amount of air as it once did it may need to be cleaned or replaced.!    

Note: Mounting plate dimensions are 4″ X 4-3/8″.  It is suggested that you replace the high limit safety snap disc whenever you replace the room blower. 

Please see the instructions for resetting the blower speed when replacing your blower

Note: If you have an older Breckwell stove with mounting plate dimensions 5" x 5 1/2" you will need an adapter plate A-MP-KIT


Replacement For Part Numbers:

  • A-E-033
  • 80647
  • PP7310
  • C-E-029

View Compatible Models

UPC: 012685000978

Compatible Models

    Golden Eagle

  • 5040

    US Stove Company

  • 5040

Technical Specs

Volts 115 AC
Cycles 60 Hz
Amps 2.1 LFA
RPM 3000
Wiring Connectors 1 Male 1 Female

Instructions

Install Instructions For US Stove Convection/Room Blower: A-E-033A
  1. Unplug the unit from the power source
  2. Remove the rear panel, you may need to remove the venting from the unit depending upon your installation
  3. Remove the side panel which has the the controller.
  4. Disconnect all of the wires from the controller and set the panel aside
  5. Remove the wires for the blower which is located behind the control area
  6. Remove the blower mounting screws from the rear wall of the stove
  7. Install your new blower with a new gasket
  8. Reconnect the blower wiring
  9. Reconnect the wires to the the controller
  10. Reconnect rear panel, venting and power cord.

Troubleshooting

-The distribution blower is the fan responsible for blowing hot air into the room. Often times this blower will become coated in dust and pet hair. If you feel like the blower is not moving as much air as it once did, the motor should be cleaned. If this does not resolve the issue the motor may need to be replaced.


-Many stoves are also equipped with a high-limit sensor. If your high-limit sensor is tripping or you are receiving a high-limit error code on your board this may indicate that the blower is not moving as much air as it should.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

USSC Pellet Stove Convection/Room Blower. This blower circulates air around the stove and across the heat exchanger.  This fan is responsible for transferring warm air into the room.  If your blower is not functioning correctly, it can greatly reduce the amount of heat you get from the stove!  If the blower is not moving the same amount of air as it once did it may need to be cleaned or replaced.!    

Note: Mounting plate dimensions are 4″ X 4-3/8″.  It is suggested that you replace the high limit safety snap disc whenever you replace the room blower. 

Please see the instructions for resetting the blower speed when replacing your blower

Note: If you have an older Breckwell stove with mounting plate dimensions 5" x 5 1/2" you will need an adapter plate A-MP-KIT


Replacement For Part Numbers:

  • A-E-033
  • 80647
  • PP7310
  • C-E-029

View Compatible Models

UPC: 012685000978

Technical Specs

Volts 115 AC
Cycles 60 Hz
Amps 2.1 LFA
RPM 3000
Wiring Connectors 1 Male 1 Female

Instructions

Install Instructions For US Stove Convection/Room Blower: A-E-033A
  1. Unplug the unit from the power source
  2. Remove the rear panel, you may need to remove the venting from the unit depending upon your installation
  3. Remove the side panel which has the the controller.
  4. Disconnect all of the wires from the controller and set the panel aside
  5. Remove the wires for the blower which is located behind the control area
  6. Remove the blower mounting screws from the rear wall of the stove
  7. Install your new blower with a new gasket
  8. Reconnect the blower wiring
  9. Reconnect the wires to the the controller
  10. Reconnect rear panel, venting and power cord.

Troubleshooting

-The distribution blower is the fan responsible for blowing hot air into the room. Often times this blower will become coated in dust and pet hair. If you feel like the blower is not moving as much air as it once did, the motor should be cleaned. If this does not resolve the issue the motor may need to be replaced.


-Many stoves are also equipped with a high-limit sensor. If your high-limit sensor is tripping or you are receiving a high-limit error code on your board this may indicate that the blower is not moving as much air as it should.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Elvin W.
Glad I bought best blower

I purchased a cheaper aftermarket blower a few years ago and realized after visiting a friend with a pellet stove how his stove was much quieter so I decided to purchase an OEM blower and what a difference. Though the blower I replaced worked as it was supposed to it just was much noiseier the OEM is so quiet, sounds like it's barely even running we love the change I am frustrated with myself for not having done that originally from now on spending the money and getting the best equipment for my pellet stove.

J
Jim D.
Breckwell Convection Blower

Easy to locate on the site. I chose the OEM part, shipped quickly and installed easily. Works great!

T
Tyler N.
Perfect piece

I needed this blower super quick, the directions were easy to read and my stove is working just like it did when we bought it. Worth the money.

C
Carie B.
Blower fan

Eay to install. Works great!

E
Elaine S.
Beckwell Convection Blower

Received the part within a 3 days which was appreciated. Works great. No problem.

12

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Elvin W.
Glad I bought best blower

I purchased a cheaper aftermarket blower a few years ago and realized after visiting a friend with a pellet stove how his stove was much quieter so I decided to purchase an OEM blower and what a difference. Though the blower I replaced worked as it was supposed to it just was much noiseier the OEM is so quiet, sounds like it's barely even running we love the change I am frustrated with myself for not having done that originally from now on spending the money and getting the best equipment for my pellet stove.

J
Jim D.
Breckwell Convection Blower

Easy to locate on the site. I chose the OEM part, shipped quickly and installed easily. Works great!

T
Tyler N.
Perfect piece

I needed this blower super quick, the directions were easy to read and my stove is working just like it did when we bought it. Worth the money.

C
Carie B.
Blower fan

Eay to install. Works great!

E
Elaine S.
Beckwell Convection Blower

Received the part within a 3 days which was appreciated. Works great. No problem.

12
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid