Skip to main content
Skip to main content
Product title:

Whitfield Pressure Switch Kit: 13640014

Product rating:
Product price:
$89.99
Product SKU ! 13640014
Product MPN ! 13640014
Product availability: In Stock
Bullet point features

Description

Pressure Switch Kit # 13640014 This part is compatible for: Quest Plus FS (WP4) Quest Insert (WP4) Advantage II Pellet Stove Freestanding & Insert WP2 - Model Years: 1989 - 1990 (Serial # 7401 - 18144).
The pressure switch in this kit is not the same as the factory original pressure switch (but it is equivalent).

Replacement For Part Number:

  • 13640014

View Compatible Models

Compatible Models

    Whitfield

  • Advantage II INS (10348 - 18144)
  • Advantage II (10348 - 18144)
  • Advantage II-T
  • Quest FS WP4
  • Quest INS WP4
  • Quest Plus FS WP4

Technical Specs

Videos

Instructions

Install Instructions For Whitfield Pressure Switch Kit: 13640014

1. Remove pellet from hopper to expose rivets.

Suggestion: Place a towel over auger to prevent any metal debris falling into auger.

2. Open the left side stove panel.

3. Remove rear stove panel.

4. Disconnect the hose and wires from the original pressure switch.

5. Remove the original pressure switch by drilling out the two rivets from inside the hopper as follows:

  • Center punch the 2 rivet heads inside the hopper to leave dimples for centering drill bit.
  • Using a 11/64" drill bit, drill into each rivet head until the head comes free from the shank.
  • Tap out the rivet shanks using a 1/8" center punch. Remove old pressure switch and discard. With the rivets removed continue drilling the holes all the way through.

6. Install new pressure switch as follows.

Note: Switch must be mounted vertically.

  • Secure the pressure switch mounting bracket to the underside of the hopper by pressing in the new rivets with back-up rivet washers (using a rivet gun).

Note: The rivet head is inside of hopper and the washers are on the outside of the pressure switch bracket.

  • Connect the hose to the pressure switch using the plastic tie.
  • Connect wires to the terminals on pressure switch.
  • Reinstall rear panel and close side panel.
  • Inspect hopper - Ensure that no metal debris fell into the auger.

Troubleshooting

Do not remove the rivets using a chisel (to chip off the head of the rivet). This could oblong the rivet hole or tear the hopper skin.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Pressure Switch Kit # 13640014 This part is compatible for: Quest Plus FS (WP4) Quest Insert (WP4) Advantage II Pellet Stove Freestanding & Insert WP2 - Model Years: 1989 - 1990 (Serial # 7401 - 18144).
The pressure switch in this kit is not the same as the factory original pressure switch (but it is equivalent).

Replacement For Part Number:

  • 13640014

View Compatible Models

Compatible Models

    Whitfield

  • Advantage II INS (10348 - 18144)
  • Advantage II (10348 - 18144)
  • Advantage II-T
  • Quest FS WP4
  • Quest INS WP4
  • Quest Plus FS WP4

Instructions

Assembly Instructions For Whitfield Pressure Switch Kit: 13640014

1. Remove pellet from hopper to expose rivets.

Suggestion: Place a towel over auger to prevent any metal debris falling into auger.

2. Open the left side stove panel.

3. Remove rear stove panel.

4. Disconnect the hose and wires from the original pressure switch.

5. Remove the original pressure switch by drilling out the two rivets from inside the hopper as follows:

  • Center punch the 2 rivet heads inside the hopper to leave dimples for centering drill bit.
  • Using a 11/64" drill bit, drill into each rivet head until the head comes free from the shank.
  • Tap out the rivet shanks using a 1/8" center punch. Remove old pressure switch and discard. With the rivets removed continue drilling the holes all the way through.

6. Install new pressure switch as follows.

Note: Switch must be mounted vertically.

  • Secure the pressure switch mounting bracket to the underside of the hopper by pressing in the new rivets with back-up rivet washers (using a rivet gun).

Note: The rivet head is inside of hopper and the washers are on the outside of the pressure switch bracket.

  • Connect the hose to the pressure switch using the plastic tie.
  • Connect wires to the terminals on pressure switch.
  • Reinstall rear panel and close side panel.
  • Inspect hopper - Ensure that no metal debris fell into the auger.

Troubleshooting

Do not remove the rivets using a chisel (to chip off the head of the rivet). This could oblong the rivet hole or tear the hopper skin.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)