Skip to main content
Skip to main content
Product title:

Whitfield Lower Auger Bushing & Lock Collar: 12021101-AMP

Product rating:
Product price:
$7.99
Product SKU ! 12021101-AMP
Product MPN ! 12021101
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $98.96

Description

Replacement nylon lower auger bushing bearing for select Whitfield pellet stoves. Inner Diameter 3/4"


Replacement For Part Number:

  • 12021101

View Compatible Models

Compatible Models

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Profile 20 FS (7495 - 7494)
  • Profile 30 FS (11905 - 11904)
  • Profile 30 INS (11905 - 11904)

Technical Specs

Inner Diameter 3/4"

Instructions

Install Instructions For Whitfield Lower Auger Bushing & Lock Collar: 12021101-AMP

Instructions for replacing part # 12021101, 12021101-AMP, Lower Auger Bearing in the Lennox/ IHP Montage and all Whitfield Pellet Stoves and Inserts



  • Unplug the stove from the power outlet
  • Remove the rear panel of the stove
  • It is sometimes much easier to remove the stove from the exhaust vent too so you can spin the stove around as all of the work you will doing is from the rear of the stove
  • Remove the rear service panel
  • Find the auger motor and remove the wire terminals from the motor
  • The set screw that hold the motor to the auger is a 1/4" allan key, loosen this screw and the feed motor should slip out of the auger shaft.
  • Empty the hopper of pellets
  • Remove the 4 1/8" allan key screws that mount the feed plate to the bottom of the hopper, Whitfield stoves will have 4 - 7/16" hex nuts
  • Remove the auger and plate from the stove
  • Remove the lock nut that hold the nylon bushing to the plate. If your stove uses a brass bushing, no worries, this nylon bushing can be used as a replacement
  • Install new bushing with new lock nut
  • Reinstall auger assembly with the mounting plate in the downward position
  • IT IS SUGGESTED TO ALWAYS INSTALL A NEW AUGER MOTOR WHEN INSTALLING A NEW BUSHING
  • Reconnect auger set screw
  • Attach wire leads to motor and fold them down and away so the rear panel can be reattached
  • Reinstall the rear service panel
  • Attach venting is disconnected
  • Plug in and enjoy stove

Troubleshooting

The auger end plate bushing is a crucial part that contribute to the overall life of your feed motor. Always replace this bushing when replacing a feed motor. Replace the auger bushing if dust from the hopper is leaking past the bushing into the mechanical cabinet.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement nylon lower auger bushing bearing for select Whitfield pellet stoves. Inner Diameter 3/4"


Replacement For Part Number:

  • 12021101

View Compatible Models

Compatible Models

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Profile 20 FS (7495 - 7494)
  • Profile 30 FS (11905 - 11904)
  • Profile 30 INS (11905 - 11904)

Technical Specs

Inner Diameter 3/4"

Instructions

Install Instructions For Whitfield Lower Auger Bushing & Lock Collar: 12021101-AMP

Instructions for replacing part # 12021101, 12021101-AMP, Lower Auger Bearing in the Lennox/ IHP Montage and all Whitfield Pellet Stoves and Inserts



  • Unplug the stove from the power outlet
  • Remove the rear panel of the stove
  • It is sometimes much easier to remove the stove from the exhaust vent too so you can spin the stove around as all of the work you will doing is from the rear of the stove
  • Remove the rear service panel
  • Find the auger motor and remove the wire terminals from the motor
  • The set screw that hold the motor to the auger is a 1/4" allan key, loosen this screw and the feed motor should slip out of the auger shaft.
  • Empty the hopper of pellets
  • Remove the 4 1/8" allan key screws that mount the feed plate to the bottom of the hopper, Whitfield stoves will have 4 - 7/16" hex nuts
  • Remove the auger and plate from the stove
  • Remove the lock nut that hold the nylon bushing to the plate. If your stove uses a brass bushing, no worries, this nylon bushing can be used as a replacement
  • Install new bushing with new lock nut
  • Reinstall auger assembly with the mounting plate in the downward position
  • IT IS SUGGESTED TO ALWAYS INSTALL A NEW AUGER MOTOR WHEN INSTALLING A NEW BUSHING
  • Reconnect auger set screw
  • Attach wire leads to motor and fold them down and away so the rear panel can be reattached
  • Reinstall the rear service panel
  • Attach venting is disconnected
  • Plug in and enjoy stove

Troubleshooting

The auger end plate bushing is a crucial part that contribute to the overall life of your feed motor. Always replace this bushing when replacing a feed motor. Replace the auger bushing if dust from the hopper is leaking past the bushing into the mechanical cabinet.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $49!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Edward H.
Whitfield auger bushing and lock collar

It was received and was exactly as advertised and worked nicely

J
Judy S.
Very Dependable

Fast service, excellent inventory of older Whitfield pellet stove parts that I need! Have bought from them many times. Very Satisfied

M
Michael P.
Quality precision part

Very fast shipping and great customer service

A
Anthony G.
Whitfield advantage plus

Great selection on parts for old stoves. Easy ordering and fast delivery

R
Robert A.
Good service

Arrived in a timely manner

123

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question

  • Why my Whitfield pellet stove after 20 30 minutes it’s shut down and when I press the start switch it goes on

    The proof of fire switch is not detecting the heat/ flame during the startup sequence. Replace the low switch for older Whitfield pellet stoves, replace the photo-eye sensor for Whitfield stoves made from 1999-2003.

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Edward H.
Whitfield auger bushing and lock collar

It was received and was exactly as advertised and worked nicely

J
Judy S.
Very Dependable

Fast service, excellent inventory of older Whitfield pellet stove parts that I need! Have bought from them many times. Very Satisfied

M
Michael P.
Quality precision part

Very fast shipping and great customer service

A
Anthony G.
Whitfield advantage plus

Great selection on parts for old stoves. Easy ordering and fast delivery

R
Robert A.
Good service

Arrived in a timely manner

123
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid