Skip to main content
Skip to main content
Product title:

ComfortBilt Pellet Stove Motherboard / Module Circuit Board (Post 07/2019): MB2

Product rating:
Product price:
$279.99
Product SKU ! MB2
Product MPN ! MB2
Only 3 Left In Stock
Bullet point features

Frequently Bought Together

Total Price: $294.98

Description

ComfortBilt Pellet Stove Motherboard / Module Circuit Board. Replacement for stoves manufactured after July 2019 (Blue Board with 4 wire data cable connection).  The motherboard is the main circuit board that all other components are connected to. It provides the electrical pathways for the control panel, switches, sensors, and other active components.


Replacement For Part Numbers:

  • MB2
  • Blue PCB

View Compatible Models

Compatible Models

    ComfortBilt

  • HP21
  • HP22
  • HP22I
  • HP22N
  • HP50
  • HP50GC
  • HP55
  • HP61

Technical Specs

Videos

Instructions

Install Instructions For ComfortBilt Pellet Stove Motherboard / Module Circuit Board (Post 07/2019): MB2

Install Instructions:

1.) Ensure that the power is disconnected from the unit

2.) Unscrew the anchor bolts that secure the L-bracket to the stove body and back of the black box.

3.) Lay the circuit board down on its back and place the new circuit board in the same orientation next to it.

4.) Remove the cover plate from both boards (The plate will be held in place by 4 screws).

5.) One by one remove the connection wires from the old board and attach them to the new board (Pay close attention that you place the connections in the same locations on the new board. If there is any confusion about the connection locations, click on the Videos tab or review the " Connections" list below).

6.) After all connectors have been attached to the new board reattach the face plate.

7.) Remount the bracket to the black box and stove.

8.) Reconnect power to the stove.

Connections:

Black 20 pin - Connector for gray data line going to top control panel.

Red 2 pin - Connector for NTC1 Proof of fire switch

Yellow 2 Pin - NTC2 Overheat sensor

White 2 Pin - Thermostat temperature sensing wire

Blue 2 Pin - Limit/Hopper Lid Switch

Black 2 Pin - Vacuum Switch Starting at the top right and going down the right side:

Blue soft cover - 10A motherboard fuse

White 14 Pin - Main power harness connector 

Click on the Videos tab above for more information!

Troubleshooting

Helpful Tips:

The Motherboard is located in the central portion of the stove, usually mounted to a floor bracket. This is the main circuit board that all components are connected to. It provides the electrical pathways for the control panel, switches, sensors, and other active components.

Click on this link for more information or check out Comfort Built's: Power Failures PT. 3 by clicking on the Videos tab above!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

ComfortBilt Pellet Stove Motherboard / Module Circuit Board. Replacement for stoves manufactured after July 2019 (Blue Board with 4 wire data cable connection).  The motherboard is the main circuit board that all other components are connected to. It provides the electrical pathways for the control panel, switches, sensors, and other active components.


Replacement For Part Numbers:

  • MB2
  • Blue PCB

View Compatible Models

Instructions

Assembly Instructions For ComfortBilt Pellet Stove Motherboard / Module Circuit Board (Post 07/2019): MB2

Install Instructions:

1.) Ensure that the power is disconnected from the unit

2.) Unscrew the anchor bolts that secure the L-bracket to the stove body and back of the black box.

3.) Lay the circuit board down on its back and place the new circuit board in the same orientation next to it.

4.) Remove the cover plate from both boards (The plate will be held in place by 4 screws).

5.) One by one remove the connection wires from the old board and attach them to the new board (Pay close attention that you place the connections in the same locations on the new board. If there is any confusion about the connection locations, click on the Videos tab or review the " Connections" list below).

6.) After all connectors have been attached to the new board reattach the face plate.

7.) Remount the bracket to the black box and stove.

8.) Reconnect power to the stove.

Connections:

Black 20 pin - Connector for gray data line going to top control panel.

Red 2 pin - Connector for NTC1 Proof of fire switch

Yellow 2 Pin - NTC2 Overheat sensor

White 2 Pin - Thermostat temperature sensing wire

Blue 2 Pin - Limit/Hopper Lid Switch

Black 2 Pin - Vacuum Switch Starting at the top right and going down the right side:

Blue soft cover - 10A motherboard fuse

White 14 Pin - Main power harness connector 

Click on the Videos tab above for more information!

Troubleshooting

Helpful Tips:

The Motherboard is located in the central portion of the stove, usually mounted to a floor bracket. This is the main circuit board that all components are connected to. It provides the electrical pathways for the control panel, switches, sensors, and other active components.

Click on this link for more information or check out Comfort Built's: Power Failures PT. 3 by clicking on the Videos tab above!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)