Harman XXV & 52i Pellet Stove Door Glass Kit (Not-Mirrored): 1-00-677000-AMP

**This replacement glass does not have a mirrored finish** 

Replacement Door Glass Kit for all Harman Accentra 52i Insert and XXV Pellet Stoves. Measures 3/16" thick x 12 3/16" tall x 17 1/8" wide with cut-off corners at the top. The kit includes the glass, gasket, clips, hardware, and glass cleaner.

This glass is sold without a gasket, part 1-00-1186258229

This glass may require new clips. part 1-00-249140

A Note About Our Glass: Unlike some manufacturers, we do not use tempered glass. Tempered glass should NEVER be used in a wood fuel stove, it is not suitable for high heat use. Our glass is made to resist very high temperatures up to 1,400° F / 760° C with low thermal expansion.

UPC: 652174751266

Replacement For Part Number:

• 1-00-677000

These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

This product is a kit containing 2 total items.

Component Technical Specs

Open a part to see its specifications.

1 xHarman Door Glass XXV & 52i (Not-Mirrored)

SKU 1-00-677000-AMP (opens in new tab)

Quantity In Kit	1
Length (in)	17 ⅛"
Width (in)	12 ³⁄₁₆"
Thickness (in)	0.19"
Maximum Width	17 1/8" (433 mm)
Maximum Height	12 3/16" (308 mm)
Height On Right Side of Arch	10 5/8" (270 mm)
Height On Left Side of Arch	10 5/8" (270 mm)
Gasket Included	No
Weight	3.75 lbs

1 xHarman Accentra Insert Glass Installation Kit, 1-00-674090-AMP

SKU INSTALLATION KIT FOR 1-00-674090 (opens in new tab)

Quantity In Kit	1
Weight	10.25 oz

• Always use the factory recommended gaskets and fasteners to secure the glass in your stove. Some of our glass comes with gasket, others do not, please order accordingly.
• Every stove is different, when removing your old glass, pay attention to the system your stoves uses to secure the glass. Take pictures of your old glass in stages as you remove it from the stove so that you have a reference of how the new glass needs to be reinstalled.
• Use caution when tightening down the hardware. Fasteners should hold the glass in place. Think “snug” but not “tight”. The system must allow for expansion as the glass is heated. Overtightening fasteners, allowing the glass to “float” or move around, or allowing any metal on the door system to touch the glass will most always result in the glass breaking when the stove is heated.
• A basic rule with stove glass:
  • The channels the glass is mounted in should be clean, flat, and free of debris.
  • Gasket material provides an airtight seal where the glass and stove meet, this prevents the glass from making direct contact with any metal on the stove.
  • Many stoves are equipped with and “air wash” to help keep the glass clean. This is usually accomplished by removing a section of the glass gasket at the top or the bottom of the glass. If you see a section of gasketing “missing” this is probably why.
• When handling stove glass, wear gloves to prevent oils from your skin making contact with the glass. Gloves will also reduce the chance of any glass or gasket manufacturing debris from being absorbed into your skin.

Troubleshooting Notes

**Note: If you are replacing the glass in your Accentra 52i Insert because there is a gray spot etched in the center of the glass, your insert may have an older burn pot. There have been 3 burn pot revisions from Harman for the 52i Insert to correct an "over-firing" problem which can cause this gray spot to appear in the glass. Check with dealer to see if your unit is covered under warranty. If you replace the glass but do not have the latest 1-00-574605 burn pot installed, the discoloring can return.

Please open and inspect your glass to make sure that it has arrived intact. Damage Claims for broken glass from shipping MUST be made within 72 hrs of delivery, no exceptions. Glass breaking from after installation is NOT covered under warranty, this is due to improper installation. If you do not feel comfortable replacing your glass, please contact a licensed technician. For instructions on proper glass installation, please read the instructions provided in the instructions tab.

This Item Qualifies For Free Shipping!