Harman XXV TC Pellet Stove Repair and Replacement Parts

This 306 Watt igniter is compatible with all automatic ignition Harman stoves except the PC45 and the PB105, which use a pressurized ignition syste...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. This item contains one gasket for the exhaust tailpipe and one gasket for the burnpot. ...

This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin..works with all Harman models listed. View our...

Harman Distribution Blower for the XXV, P35i & Accentra Free Standing, 1-00-29145 Replacement Harman Distribution Blower. The distribution blow...

This flame guide replacement part is compatible with the following Harman stoves: -Accentra Insert, XXV, P35i, P43, P68, HF60, 52i, P43, Absolute43...

Replacement Flame Guide for Harman Stoves. Measurements: 6-1/4" to 3-1/2" x 4-1/8. Replaces Old Harman part number 3-00-674069. The flame guide is...

Replacement blower mounting screw for Harman stoves. These studs are used to attach the combustion blower to the blower mount. Three (3) of these s...

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sy...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

One Replacement 1/4" screw post with washer. These are the screws that attach the glass hopper lid to the hinges. If you can hear a "whistle" from ...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

A pressure switch is often referred to as a vacuum switch. This sensor is looking for airflow within the stove to close the circuit to the feed sys...

Harman Burn Pot Gasket, 1-00-07381 (Burn Pot Gasket Only) The burn pot gasket goes between the burn pot and the body of the stove and prevents comb...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Harman Distribution Blower for the XXV, P35i & Accentra-Cast, 1-00-29145. There have been many revisions to this motor over the years. This ver...

Harman Accentra, XXV 52i & Accentra Insert Glass Gasket Replacement glass gasket for Harman stoves. 3/16 x 10' with PSA self adhesive. Harman ...

Ceramic plate overfire replacement gasket for Harman pellet stoves, inserts, and boilers that utilize a burn pot with primary air inlets that over ...

Harman Burn Pot Weldment for the Accentra Insert (2003-2012), Advance, P43, P43-C, XXV, XXV-TC. All Harman burnpots require a new gasket when mount...

This Wooden Handle(with bolt) is for the following stove models: Accentra Insert, Accentra, Accentra 52i  P35i,P43,P61,P61A, PC45 P38 (post serial...

Set of four screws and clips for securing the door glass into the following units: Accentra Insert, Accentra, 52i, P35i, P38, P43, P61, P61A, P68, ...

Harman Ash Door Gasket for the XXV Pellet Stove (G118) 5ft, 1-00-71611 This is the tadpole (flat gasket with a bulbed edge) gasket that is located ...

This is a set of 6 serrated hex nuts that are used to secure the combustion / exhaust blower motor onto blower housings that have threaded mounting...

Replacement Door Glass for all Harman Accentra 52i Insert and XXV Pellet Stoves. Measures 3/16" thick x 12 3/16" wide x 17 1/8" wide with cut-off c...

This is an outboard 4RPM Auger Feed Motor for the Harman Advance, Accentra & XXV pellet stoves with a direct drive feeder design. These motors ...

HARMAN WIRELESS ROOM SENSOR THERMOSTAT Fits Models:  Absolute43, Absolute63, Allure50, XXV-TC, and Accentra Insert 52i-TC Harman Wireless Room Sens...

Harman Burn Pot Weldment for the Accentra Insert (2003-2012), Advance, P43, P43-C, XXV, XXV-TC. All Harman burnpots require a new gasket when mount...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

This Touch Up Paint is a fast-drying, exact color match for the popular Majolica Brown color used for cast iron enamel finishes in the Harman Pelle...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

Harman Air Intake Gasket for pellet most models. This is used to seal the intake flapper to the air intake weldment.

This burn pot cleanout cover with 2 wingscrews is located at the front of all Harman pellet stoves and pellet inserts that are equipped with automa...

Feeder air crossover tube kit for Harman pellet stove and inserts. Kit Includes: 8-1/2" of 9mm silicone tube Two (2) 3/8" brass sleeves, and instr...

This is an outboard 4RPM Auger Feed Motor for the Harman Advance, Accentra & XXV pellet stoves with a direct drive feeder design. These motors ...

This burn pot cleanout cover with 2 wingscrews is located at the front of all Harman pellet stoves and pellet inserts that are equipped with automa...

Replacement 3" Flue Tailpipe for all freestanding Harman Pellet Stoves. This appliance collar connects to the venting adapter to connect the stove ...

**This replacement glass does not have a mirrored finish**  Replacement Door Glass for all Harman Accentra 52i Insert and XXV Pellet Stoves. Measur...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

This igniter cradle has an adjustable depth and is the most recent design from Harman for their finned ignition system. This cradle can be used any...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

This igniter cradle has an adjustable depth and is the most recent design from Harman for their finned ignition system. This cradle can be used any...

Replacement 1/2 pillow block for Harman stoves.