Install Instructions For Breckwell Pellet Stove (Vacuum/Pressure) Switch Hose (1FT): 891121
Instructional Documents
Instructional Notes
1.) Unplug the stove.
2.) Remove the necessary panels to gain access to the rear of the unit.
3.) Locate the vacuum/pressure switch. Pay attention to which port the hose connects to on the switch. Some units may have a switch with two ports on it. The hose must be installed on the correct port to function properly.
4.) Remove the old hose. One side should be connected to the pressure switch, and the other will be connected to a port on the rear of the stove or combustion blower housing.
5.) Reinstall any previously removed panels and plug in the unit.
Note: On some units, the vacuum hose will simply slip over the port on the vacuum switch; on others, a hose clamp is used to hold the hose in place.