Skip to main content
Flash Sale Live [ UP TO 35% OFF SITE WIDE! ] No Discount Code Necessary Free shipping on orders over $99* 90-Day Warranty Included Flash Sale Live [ UP TO 35% OFF SITE WIDE! ] No Discount Code Necessary 90-Day Warranty Included
Product title:

Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP

Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP
Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP

Have a Question? Contact Us 24/7 to Ask a Specialist

Product rating:
Product price:
$249.99

$158.00 less than the OEM

Product SKU ! 812-3690-AMP
Product MPN ! 812-3690
Product availability: In Stock
Bullet point features

Pay over time with Affirm.

Have a Question? Contact Us 24/7 to Ask a Specialist

You may also want to consider...
Quadra-Fire 18" Loop Igniter Heating Element (380 Watts): SRV7000-462-OEM

$59.49

You are viewingAftermarket (AMP)Saves $158.00 vs the OEM Consider insteadOEM
Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMPRelated Product Title Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-OEM
$249.99In stockRelated Product Price: $479.99 $407.99In stock
Related Product Ratings:

Frequently Bought Together

Parts other customers added to their cart along with this one. Untick any you do not need, then add the rest together.

Description

This Quadra-Fire feed motor assembly is used on all model variations of the Classic Bay CB 1200 pellet stove and CB 1200i Pellet Insert

This whole assembly is a compatible fit for all model versions when it is installed completely as a whole assembly.

This assembly has updates to the bearing and the motor bracket which ARE NOT COMPATIBLE with older feed assembly parts.

This assembly includes the following parts:

    • 1 x Feed Motor (812-4421)
    • 4 x 8-32 X 3/8'' Phillips Screws (225-0500)
    • 1 x 7/8" Lock Collar (229-0520)
    • 1 x Nylon Bearing (SRV7000-598)
    • 1 x Motor Bracket (410-7172)
    • 1 x Feed Motor Gasket (SRV240-0731)
    • 1 x Feed Spring Assembly SRV7027-024)
    • 1 x Shaft Set Screw (225-0550)

    This kit uses aftermarket parts where applicable to help you save big!

    **NOTES**

    • Final bearing height adjustment is required by the installer, instructions included. Download PDF

    UPC: 652174167449

    Replacement For Part Number:

    • 812-3690

    Kit Includes

    This product is a kit containing 10 total items.

    812-4421-AMP
    1 xQuadra-Fire 2.4 RPM Auger Feed Motor without Bracket
    SKU 812-4421-AMP (opens in new tab)
    229-0520
    1 xQuadra-Fire 7/8" Auger Collar with Set Screw
    SKU 229-0520 (opens in new tab)
    SRV7000-598
    1 xQuadra-Fire Pellet Stove Nylon Auger Bearing
    SKU SRV7000-598 (opens in new tab)
    SRV240-0731
    1 xQuadra-Fire Feed Motor Gasket
    SKU SRV240-0731 (opens in new tab)
    SRV7027-024-AMP
    1 xQuadra-Fire Classic Bay Feed Spring Assembly
    SKU SRV7027-024-AMP (opens in new tab)
    83202
    4 x8-32 x 3/8" Black Oxide Phillips Pan Head Screw
    SKU 83202 (opens in new tab)
    410-7172-AMP
    1 xQuadra-Fire Classic Bay Feed Motor Mount for the Classic Bay 1200 pellet stoves and insert, 410-7172
    SKU 410-7172-AMP (opens in new tab)

    Compatible Models

    These are all of the confirmed compatible units for this product. Where To Find Your Make & Model

    Technical Specs

    Check these against the part you are replacing before ordering. If a dimension does not match, contact us and we will confirm the fit.

    Voltage 115/120
    Amperage 1
    RPM (Rotations/Minute) 2.4
    Rotation Direction Clockwise
    Wire Connector Notes Includes Optional Adapter Harness
    Shaft Length 16"

    This product is a kit containing 10 total items.

    Component Technical Specs

    Open a part to see its specifications.

    812-4421-AMP
    1 xQuadra-Fire 2.4 RPM Auger Feed Motor without Bracket
    SKU 812-4421-AMP (opens in new tab)
    Quantity In Kit 1
    Length (in) 3 ½"
    Width (in) 3"
    Height (in) 2 ¼"
    Voltage 115/120
    RPM (Rotations/Minute) 2.4
    Rotation Direction Clockwise
    Wire Connector Notes Includes Optional Adapter Harness
    Shaft 1/4"
    Weight 1.25 lbs
    229-0520
    1 xQuadra-Fire 7/8" Auger Collar with Set Screw
    SKU 229-0520 (opens in new tab)
    Quantity In Kit 1
    Length (in) 1 ½"
    Width (in) 1 ½"
    Height (in) ½"
    Inner Diameter (in) ⅞"
    Size 7/8"
    Weight 3.00 oz
    SRV7000-598
    1 xQuadra-Fire Pellet Stove Nylon Auger Bearing
    SKU SRV7000-598 (opens in new tab)
    Quantity In Kit 1
    Length (in) 1 ⅝"
    Width (in) 1 ⅝"
    Height (in) ½"
    Weight .25 oz
    SRV240-0731
    1 xQuadra-Fire Feed Motor Gasket
    SKU SRV240-0731 (opens in new tab)
    Quantity In Kit 1
    Length (in) 4 ¼"
    Width (in) 3"
    Height (in) ⅛"
    Weight 0.50 oz
    SRV7027-024-AMP
    1 xQuadra-Fire Classic Bay Feed Spring Assembly
    SKU SRV7027-024-AMP (opens in new tab)
    Quantity In Kit 1
    Length (in) 15 ¾"
    Width (in) 1 ¾"
    Height (in) 1 ¾"
    Weight 15.25 oz
    83202
    4 x8-32 x 3/8" Black Oxide Phillips Pan Head Screw
    SKU 83202 (opens in new tab)
    Quantity In Kit 4
    Length (in) ½"
    Width (in) ¼"
    Height (in) ¼"
    Imperial thread 8-32
    Head type PHILIPS PAN
    Material STAINLESS STEEL
    Color BLACK
    Threading 8-32
    Weight 0.25 oz
    410-7172-AMP
    1 xQuadra-Fire Classic Bay Feed Motor Mount for the Classic Bay 1200 pellet stoves and insert, 410-7172
    SKU 410-7172-AMP (opens in new tab)
    Quantity In Kit 1
    Length (in) 3 ½"
    Width (in) 3"
    Height (in) 2"
    Weight 7.25 oz

    Wiring and Connectors

    Wire, terminals and connectors for the job, in case yours are worn or the ones you have do not reach.

    Instructions

    Install Instructions For Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly: 812-3690-AMP

    Instructional Documents

    Instructional Videos

    Instructional Notes

    Feed Motor Spring Replacement Instructions


    1. Open the right-side curtain and remove hopper's side heat shield to access wiring and disconnect Molex wire connections. If there are not any Molex wires connectors, then disconnect the spade connectors under feed motor cover.
    2. Remove or support the hopper lid while you work.
    3. Mark the feed adjustment rod position on feed motor cover for future reference. This will eliminate the need to re-set the feed rate when you are done.
    4. Remove the cover and front access plate from hopper. Use a 7 /16" wrench to remove the two nuts holding down the nylon bearing and motor mount.
    5. Remove feed motor / auger assembly by pulling out towards face of the stove.
    6. Install your new assembly.


    NOTE: This assembly has a different bearing and motor mount than what was on previous models. The bracket mounts directly to the feed tube without the nylon block.

    Troubleshooting

    Troubleshooting Notes

    Quadra-Fire Classic Bay 1200 Pellet Stove: Troubleshooting Video: https://youtu.be/ZhgNWi1kE7g


    What to check if the unit is NOT feeding pellets:


    • Snap Disc #2 malfunctioned
    • Vacuum switch is not closing
    • Hopper lid switch (if equipped) is not aligned
    • Vacuum switch hose is clogged at feed tube
    • Capacitor on motor is too close to heat source or is defective
    • Bad control box

    Customers Also Bought

    Parts that customers who bought this one also ordered, the most popular first.

    Warranty

    Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for special parts may take up to 4 weeks for processing, and customers are responsible for return shipping charges.

    Shipping Information

    This Item Qualifies For Free Shipping!

    When Will My Order Ship?
    All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
    Do You Offer Express Shipping?
    Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
    How Does Free Shipping Work?
    Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
    Do You Ship To Canada?
    We ship to Canada! We estimate USPS to take 4-10 days once receiving your package. Please note, we are unable to track US Postal packages once they cross the US border and cannot guarantee shipping times. All customs fees incurred are the responsibility of the customer and are not included in the total price. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
    Do You Ship To Alaska Or Hawaii?
    We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
    Do You Ship Outside The US Or Canada?
    Unfortunately, at this time we do not offer international shipping other than to Canada.
    Shipping Time Estimations
    For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
    Learn More About Our Shipping Information

    Questions & Answers

    If your question does not concern this part, contact us directly or read our FAQs.

    No one has asked about this part yet. Ask us anything specific to it - the wattage, which style or model year it suits, what part numbers it replaces - and we will answer it ourselves.

    Every question is read by our team before it appears here, so it will not show up right away - we will email you the answer.

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Deanna B.
    Worked great

    I'm so glad I was able to find the part and get it so quickly.

    R
    Richard S.

    Good job 👍👏

    M
    Mike G.
    Auger complete ass.

    Components went together like factory. I charged the feed tube and the stove works like it should. Parts arrived in three days was great. when I ordered it said 8 to 11 days. I was surprised. I will do business with you again when something fails.

    L
    Lisa A.S.
    Replaced the motor to our Quadra-Fire nicely

    The local technicians who installed the replacement motor had a little trouble figuring out the wiring because the color codes were different but they got it done. The replacement motor arrived quickly! Thankful that our pellet stove is working again in time for winter.

    T
    Terry H.

    Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly, 812-3690-AMP

    Still have a question?

    Call or email us and we will help you find the right part.

    Contact us 1-508-392-9831
    Mon–Sat 9AM–5PM · Sun 10AM–3PM ESTShipping policy · Return policy · FAQs

    Customer Reviews

    Based on 5 reviews
    100%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    D
    Deanna B.
    Worked great

    I'm so glad I was able to find the part and get it so quickly.

    R
    Richard S.

    Good job 👍👏

    M
    Mike G.
    Auger complete ass.

    Components went together like factory. I charged the feed tube and the stove works like it should. Parts arrived in three days was great. when I ordered it said 8 to 11 days. I was surprised. I will do business with you again when something fails.

    L
    Lisa A.S.
    Replaced the motor to our Quadra-Fire nicely

    The local technicians who installed the replacement motor had a little trouble figuring out the wiring because the color codes were different but they got it done. The replacement motor arrived quickly! Thankful that our pellet stove is working again in time for winter.

    T
    Terry H.

    Quadra-Fire Classic Bay CB1200/1200i Complete Feed Motor Assembly, 812-3690-AMP