Quadra-Fire 1100i Pellet Insert Repair and Replacement Parts

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

This 34" QuadraFire thermocouple is a replacement part for the 800, 100 Series, and the CB1200 freestanding stoves and inserts. The thermocouple i...

Replacement door rope gasket for Quadra-Fire pellet, wood, and gas stoves. Gasket measures 3/4" thick x 7' long.

Quadra-Fire Pellet Stove Vacuum Switch This pellet stove replacement part includes both hoses and the Vacuum Pressure Switch. If the switch senses ...

Replacement 7 AMP Fuse for Quadra-Fire pellet stoves. This is the fuse used in the junction box on most models.

QuadraFire 300 Watt Loop igniter without wire terminal disconnects. This igniter was used on the Contour, 1100i insert, and the CB1200 stoves and ...

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

QuadraFire 300 Watt Loop igniter without wire terminal disconnects. This igniter was used on the Contour, 1100i insert, and the CB1200 stoves and i...

Quadrafire Mt Vernon OM (Original Model) - Snap Disc #2 (Feed System Override) L175°F Manual Reset Snap disc #2 is located on the right side of the...

Mt Vernon OM (Original Model) - Snap Disc #2 (Feed System Override) L175°F Snap disc #2 is located on the right side of the appliance next to snap ...

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

Replacement Snap Disc, #1, 125 Degree Power ON/ OFF Switch for the Convection Fan Room Air Blower for QuadraFire pellet, wood, and gas fireplaces....

Replacement Snap Disc, #1, 125 Degree Power ON/ OFF Switch for the Convection Fan Room Air Blower for QuadraFire pellet, wood, and gas fireplaces....

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement QuadraFire control box. Fits the following Quadra-Fire pellet stove models: 800/ 1000/ 1100 insert

Replacement 1-1/4" firepot bolt for Quadra-Fire pellet stoves.

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

This item is a thermocouple holder bracket assembly designed for Quadrafire 1000, 1100i Insert, 1200 Freestanding, 1200i Insert, 800 Nova pellet st...

Replacement ceramic wire nut for Quadrafire pellet stoves, used for connecting the igniter wires.

Replacement 1/4-20 Lock Nut for Quadrafire pellet stove firepots.

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

Quadra-Fire Thermocouple Bracket for 800, 1000, 1100, 1200 Series, 812-3171

Replacement junction box fuse holder for Quadrafire pellet stoves. Fits the following Quadrafire pellet stove models: Quadrafire 800 Quadrafire 100...

This QuadraFire thermocouple is a replacement part for the 800, 100 Series, and the CB1200 freestanding stoves and inserts. The thermocouple is ma...

Replacement Burnpot with gasket for the Quadra-Fire: 800 Pellet F/S - last s/n 1646871000 Pellet F/S - last s/n 1151061100i Pellet Insert - last s...

Replacement snap disk high limit override 250 degree for Quadra-Fire Pellet and Gas stoves. Listed as the #2 disc for pellet stoves, and as the spi...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This pellet stove replacement part goes to the following Quadra-Fire pellet stove models: 1200 Classic Bay 1200i Classic Bay Insert 1200 Classic ...

Quadrafire Hi Limit Heat Sensor SRV230-0071 PP3265  

This is a replacement glass for Quardafire 5100i, 100i ACT, 5100i PreAct, 1100i, 800 Stoves. This is a rectangle shaped glass. The measurements are...

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Replacement Screw used to mount the Feed Motor to the Bracket. Used on many Auger Assemblies for Quadrafire, Heatilator, and more.

This is an After Market Part. Ceramic, Airstream Mount, Igniter Sensor. PP3265  

Replacement Combustion Blower Gasket. Compatible Stoves: Quadra-Fire 1100i & 800 Part Number: 812-1670

This replacement Auger Motor does 2 RPMs with a Counter Clockwise rotation replaces Quadra-Fire part number 812-1220. The Auger Motor turns the Aug...

Wire connector with 2 male spades and a Molex style connector.

Replacement ceramic igniter for Quadra-Fire pellet stoves.This is the Ceramic Igniter for the Ceramic burn pot only. If you have the EZ-Clean Burn ...

This  QuadraFire 1RPM CCW auger feed motor was used on the first generation of pellet stoves, 800 Nova, 1000 Series.

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

This is a replacement glass for Quardafire Pellet & Wood Stoves. This is a rectangle shaped glass with the top arched. The measurements are 17"...

Replacement Cleanout tool also known as Burnpot/Firepot scraper for all Quadrafire models.

Wire Stripper & Cutter Tool For Wire Sizes 10-22 AWG

Replacement auger motor for model 1100 insert