Quadra-Fire Classic Bay 1200 Pellet Stove Repair and Replacement Parts

This is the factory shipped, original equipment, 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward....

This is the factory shipped, original equipment, 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward....

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

This 34" QuadraFire thermocouple is a replacement part for the 800, 100 Series, and the CB1200 freestanding stoves and inserts. The thermocouple i...

This Quadra-Fire  6" round combustion motor hub gasket is made from 100% silicone and has been designed to outlast typical gasket material; allowin...

Quadra-fire Combustion exhaust blower, motor only replacement with hub mounting gasket for Classic Bay CB1200 & CB1200i Insert. NOTE: THIS MOT...

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket...

Door Rope Gasket for Quadra-Fire Pellet Stoves. 7/8" x 8'. Stove Part # 842-2350.  Castile and Santa Fe Pellet - This gasket is used to seal around...

Replacement control box for Quadra-Fire the CB1200, Castile, Contour, and Santa-Fe pellet stoves and inserts. Includes instructions and a thermocou...

This Quadrafire convection blower is used on the freestanding versions of the Classic Bay CB1200. This is a variable speed blower with a 60 CFM/ 13...

Quadra-Fire Pellet Stove Vacuum Switch This pellet stove replacement part includes both hoses and the Vacuum Pressure Switch. If the switch senses ...

This is the updated 300-watt replacement igniter for Mt Vernon AE Stoves and Inserts and is also the standard igniter used in the Mt Vernon E2 and ...

  Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this...

Replacement 7 AMP Fuse for Quadra-Fire pellet stoves. This is the fuse used in the junction box on most models.

This is the glass gasket (often called glass tape) that is used to seal the edges of the bay window glass on the CB1200 Stove and CB1200i Insert fr...

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

QuadraFire 300 Watt Loop igniter without wire terminal disconnects. This igniter was used on the Contour, 1100i insert, and the CB1200 stoves and ...

QuadraFire 300 Watt Loop igniter without wire terminal disconnects. This igniter was used on the Contour, 1100i insert, and the CB1200 stoves and i...

This is an after-market housing exhaust blower gasket made from Lytherm fiber material which is used between blower housing and exhaust duct. Has ...

This 8 foot black, shielded power cord features a C13 (female) connector on one end and a NEMA 5-15P (male) connector on the other end. The cable i...

 Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this ...

This snap disc control switch is used to turn the power OFF/ ON to the convection room air blower on many pellets, wood and gas stoves, fireplaces,...

Replacement nylon auger bearing for many models.Compatible with the following Quadrafire pellet stoves: Mt Vernon, Mt Vernon AE, Mt Vernon AE Inser...

Snap Disc #2 (Fuel Delivery Interrupt) L200°F-40 Snap disc #2 is located on the left side of the appliance behind the access door. There are 2 yell...

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

Quadrafire Classic Bay 1200 EZ Clean Fire Pot Replacement, 812-3351. Comes With The Gasket. Fits the following models: CB1200 Classic Bay 1200 Free...

Snap Disc #2 (Fuel Delivery Interrupt) L200°F-40 Snap disc #2 is located on the left side of the appliance behind the access door. There are 2 yell...

This snap disc control switch is used to turn the power OFF/ ON to the convection room air blower on many pellets, wood and gas stoves, fireplaces,...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...