Quadra-Fire Mt Vernon E2 FS Pellet Stove Repair and Replacement Parts

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket...

Quadra-Fire Pellet Stove Vacuum Switch This pellet stove replacement part includes both hoses and the Vacuum Pressure Switch. If the switch senses ...

  Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this...

This is the updated 300-watt replacement igniter for Mt Vernon AE Stoves and Inserts and is also the standard igniter used in the Mt Vernon E2 and ...

QuadraFire 300 Watt Loop igniter without wire terminal disconnects. This igniter was used on the Contour, 1100i insert, and the CB1200 stoves and ...

Replacement firepot/ burnpot gasket for Quadra-Fire Eco-CAB50, Mt Vernon AE, Mt Vernon E2, and Trekker pellet stoves and Inserts. Also used as a bu...

This 8 foot black, shielded power cord features a C13 (female) connector on one end and a NEMA 5-15P (male) connector on the other end. The cable i...

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket...

This is the updated 300-watt replacement igniter for Mt Vernon AE Stoves and Inserts and is also the standard igniter used in the Mt Vernon E2 and ...

 Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this ...

This Quadra-Fire door rope gasket fits the following pellet stove models: MT Vernon AE MT Vernon Insert AE Santa Fe Insert MBK Approximately 64" ...

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

  This pellet stove replacement part goes to the following Quadra-Fire pellet stove models:Mt Vernon AE, Mt Vernon Insert AE.    

The upper firepot assembly is the top half of the firepot separate from the lower portion which is connected to the auto-clean mechanism. This asse...

Replacement firepot / burnpot springs for Quadra-Fire MT Vernon, E2, Trekker, and Edge 60 pellet stoves, inserts and, built-ins. Package of 4 sprin...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

Replacement 1-1/4" firepot bolt for Quadra-Fire pellet stoves.

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes ONLY the motor and the capa...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

This is the 9 petal impeller fan blade that is attached to the shaft of the combustion/ exhaust blower motor and is used on most Quadra-Fire and al...

This is a 7-Day Programmable Thermostat for Quadrafire Pellet and Gas Stoves. This TSTAT requires 2 AA batteries, which are included. This TSTAT i...

Replacement 1/4-20 Lock Nut for Quadrafire pellet stove firepots.

Replacement cast iron baffle for the trekker fs/ins, mt vernon ae/ins & edge 60

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Make routine maintenance a breeze with this complete pellet stove service kit. This kit includes everything you need to clean both your stove and ...

Replacement auger/feed spring assembly for Quadra-Fire pellet stoves and inserts. Includes the set screw and a gasket, (not pictured). Compatible w...

Replacement firepot / burnpot bottom for Quadrafire pellet stoves. Fits the following models: Edge 60 Mt Vernon AE Mt Vernon AE Insert Mt Vernon E2...

Control Board for Quadrafire Mt Vernon E2 Freestanding and Insert  Part #SRV7080-050

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

Replacement combustion blower for models mt vernon E2 free stand and insert.

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....

Replacement Screw used to mount the Feed Motor to the Bracket. Used on many Auger Assemblies for Quadrafire, Heatilator, and more.

This is a fast-acting 5AMP x 20mm fuse that is located directly on the PCB board of all Quadra-Fire pellet stoves and inserts. Owner's manuals disc...

Wire connector with 2 male spades and a Molex style connector.

Replacement combustion blower for models mt vernon E2 free stand & insert.

Replacement Control panel assembly for models Mt Vernon E2 free-standing and insert. This is the daughterboard controller, not the motherboard part...

This is the entire feed assembly used for the freestanding and insert versions of the Quadra-Fire Mt Vernon E2, MtVernon E2-C and the Trekker. The ...

Replacement Feed Motor Gasket for Quadra-Fire MT Vernon AE, Mt Vernon E2, Edge 60, and Trekker pellet stoves and inserts.

4-in-1 Multi-Purpose Wire Service Tool. Cutter, Stripper, Crimper, & Gripper

Replacement auger/feed spring assembly for Quadra-Fire pellet stoves and inserts. Includes the set screw and a gasket, (not pictured). Compatible w...

Replacement vacuum switch hose, 1-foot length for the Mt Vernon AE, E2, and Trekker pellet stove.

This is a replacement glass for Quardafire Mt. Vernon AE Pellet Stoves. This is a rectangle shaped glass. The measurements are 21 3/16" x 13 3/8" ....

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

Replacement Fiberglass Exhaust Blower Motor Gasket For Quadrafire Mt Vernon E2 Pellet Stoves & Inserts. This gasket serves as an antivibration ...

Replacement Cleanout tool also known as Burnpot/Firepot scraper for all Quadrafire models.

Replacement Rubber Gasket that goes between exhaust blower housing and blower motor. Fits the Quadra-Fire Mt. Vernon E2 Pellet Stove and Insert.