Quadra-Fire Santa Fe Pellet Stove Repair and Replacement Parts

This is the 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward. Check the compatibility tab for models.

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

Replacement tadpole door gasket for Quadra-Fire pellet and gas stoves. The gasket measures about 1" wide x 3/8" thick and comes in a 10' length, wh...

This is the factory shipped, original equipment, 380-watt replacement igniter for most Quadrafire pellet stoves and inserts made from 2006 forward....

This QuadraFire 14" thermocouple is a replacement part for the Castile, Santa Fe, Countour, and the Mt Vernon original model. The thermocouple is m...

This Quadrafire combustion/ exhaust blower motor (motor only, does not include housing) is for the Contour, Sante Fe, and Castile pellet stoves and...

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

This Quadra-Fire  6" round combustion motor hub gasket is made from 100% silicone and has been designed to outlast typical gasket material; allowin...

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket...

Door Rope Gasket for Quadra-Fire Pellet Stoves. 7/8" x 8'. Stove Part # 842-2350.  Castile and Santa Fe Pellet - This gasket is used to seal around...

QuadraFire 2.4 RPM feed motor for most pellet stoves and inserts. This part is commonly called an auger motor. Includes the motor, mounting bracket...

This Quadrafire convection blower is used on a variety of Quadrafire stoves and inserts for pellet, wood, and gas. The convection blower has the du...

Replacement 3-speed control box for Quadra-Fire the CB1200, Castile, Contour, and Santa-Fe pellet stoves and inserts. Includes: 1x: Controller (SR...

Thermocouple Cover. This 3" long cover is the updated replacement part for the longer version that was used in the past.

Quadra-Fire Pellet Stove Vacuum Switch This pellet stove replacement part includes both hoses and the Vacuum Pressure Switch. If the switch senses ...

Replacement 7 AMP Fuse for Quadra-Fire pellet stoves. This is the fuse used in the junction box on most models.

 Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this ...

Replacement Quadrafire firepot gasket. This gasket seals the edge under the firepot where it mounts into the stove. Compatible with the SRV414-5200...

 Quadrafire's Snap disc #3 is always mounted on the backside of the feed tube, directly in line with the opening of the drop chute. To access this ...

This is an after-market housing exhaust blower gasket made from Lytherm fiber material which is used between blower housing and exhaust duct. Has ...

This is a 1/4" female spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical component...

This 8 foot black, shielded power cord features a C13 (female) connector on one end and a NEMA 5-15P (male) connector on the other end. The cable i...

This QuadraFire 14" thermocouple is a replacement part for the Castile, Santa Fe, Countour, and the Mt Vernon original model. The thermocouple is m...

Quadrafire Replacement Low Limit Snap Disc #1, 110 Degree F Convection Blower On/Off Control for Quadrafire small Pellet stoves. Replace this part ...

Replacement nylon auger bearing for many models.Compatible with the following Quadrafire pellet stoves: Mt Vernon, Mt Vernon AE, Mt Vernon AE Inser...

Quadrafire Replacement Low Limit Snap Disc #1, 110 Degree F Convection Blower On/Off Control for Quadrafire small Pellet stoves. Replace this part ...

SRV230-1960 Snap Disc #2 is an older style safety switch used on the Mt Vernon and Contour Series until they were discontinued.  Castile FS - Pre ...

This is a 1/4" male spade, fully Insulated "Quick-Disconnect" terminal for 22-18 wire gauge that is used to connect power to electrical components ...

Snap Disc #2 (Fuel Delivery Interrupt) L250°-95, Auto Reset Snap disc #2 is also located on the backside of the feed drop tube. There are 2 orange ...

Replacement Glass Gasket Kit for Quadrafire Santa-Fe and Castile Pellet Stoves.   (RT380T-50" & RT341A-16")   240-0290

This Quadrafire convection blower is used on a variety of Quadrafire stoves and inserts for pellet, wood, and gas. The convection blower has the du...

OEM Quadrafire combustion/ exhaust blower motor complete with housing for the Castile, Santa Fe, and Contour. The motor can be removed from new hou...

The vacuum switch is located inside the mechanical area of the appliance and will have a black or reddish-orange hose attached. This switch closes ...

Replacement 1-1/4" firepot bolt for Quadra-Fire pellet stoves.

Replacement door glass assembly for Quadra-Fire pellet stoves. 17-1/4 W x 11-5/8 H. Gasket is sold separately. Fits the following Quadra-Fire pelle...

Replacement ceramic wire nut for Quadrafire pellet stoves, used for connecting the igniter wires.

Replacement EZ Clean Firepot Quadra-Fire pellet stoves. This part is also referred to as a burnpot. Comes with the fire pot gasket. Quadrafire: San...

SRV230-1960 Snap Disc #2 is an older style safety switch used on the Mt Vernon and Contour Series until they were discontinued and was also used on...

Replacement 1/4-20 Lock Nut for Quadrafire pellet stove firepots.

Replacement Feed Motor Gasket for the CB1200, Castile, and Santa-Fe Series of pellet stoves and inserts. Also, used for the original Mt Vernon pell...

This is a replacement wiring adapter for switching a male spade connector into a female spade connector. Can be used on blowers, auger motors, and ...

This is a replacement wiring adapter for switching a female spade connector into a male spade connector. Can be used on blowers, auger motors and m...

6" AMP Stove Exhaust Motor Gasket Motor side 4 7/8" ID 6" OD For use between blower housing and exhaust motor. ***note this will fit stove mode...

Replacement door glass assembly with gasket for Quadra-Fire pellet stoves. 17 1/4" x 11 5/8". Fits the following Quadra-Fire pellet stove models: ...

This is the 9 petal impeller fan blade that is attached to the shaft of the combustion/ exhaust blower motor and is used on most Quadra-Fire and al...

Cleanup the ashes from your stove is a breeze with the new AV15E ash vacuum from US Stove Company. With a 2.5 peak horse power motor and a 6.5 Gall...

Mechanical thermostat for Quadrafire Pellet and Gas Stoves.  Incudes electrical wire.

This is a replacement wiring adapter with a Male Crimped Terminal Spade to a Female Spade Terminal. Can be used on blowers, auger motors, and more....