Skip to main content
Skip to main content
Product title:

Whitfield Convection Blower: 12146109-AMP

Product rating:
Product price:
$149.99

A $130.00 Savings over the OEM

Product SKU ! SP4L-152-WITH WIRE CONNECTOR
Product MPN ! 12146109
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $169.98

Description

Replacement Convection Blower for compatible Whitfield Stoves. The Convection Blower pulls the rooms cool air across the burn pot. Making the fire burn more evenly and quicker. Allowing the heat exchanger to blow clean warm air into your home, resulting in both a warm toasty home and increased heating efficiently.


Replacement For Part Numbers:

  • 12146109
  • 12126109

View Compatible Models

Compatible Models

    Earth Stove

  • Traditions T300P

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage II-T C
  • Advantage II-T
  • Advantage III
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Legend
  • Optima 2 FS
  • Optima 3 FS
  • Optima 3 INS
  • Prodigy 1 (1001 - 2281)
  • Prodigy 2 (1001 - 2281)
  • Profile 20 FS (7495 - 7494)
  • Profile 30 FS (11905 - 11904)
  • Profile 30 INS (11905 - 11904)
  • Quest Plus FS WP4
  • Quest Plus INS WP4
  • Traditions T300P
  • Traditions TP300
  • Traditions TP340

Technical Specs

Volts 115
Amps .5
RPM 3000
Cycles 60Hz

Videos

Instructions

Install Instructions For Whitfield Convection Blower: 12146109-AMP

Replacing the SP4L-151-1 Blower in a Montage pellet stove:


The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.


  • Locate the motor and find the four screws or nuts that secure the motor
  • Remove the screws or nuts
  • Unplug the blower from the wiring harness
  • Install new Blower to mounting post and tighten screws or nuts
  • Reconnect power

Troubleshooting

If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


Current versions of the SP4L-151-1 blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in from the manufacturer that are made to the original spec that requires lubrication. This will be indicated on the listing table attached to the blower.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Replacement Convection Blower for compatible Whitfield Stoves. The Convection Blower pulls the rooms cool air across the burn pot. Making the fire burn more evenly and quicker. Allowing the heat exchanger to blow clean warm air into your home, resulting in both a warm toasty home and increased heating efficiently.


Replacement For Part Numbers:

  • 12146109
  • 12126109

View Compatible Models

Compatible Models

    Earth Stove

  • Traditions T300P

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage II-T C
  • Advantage II-T
  • Advantage III
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Legend
  • Optima 2 FS
  • Optima 3 FS
  • Optima 3 INS
  • Prodigy 1 (1001 - 2281)
  • Prodigy 2 (1001 - 2281)
  • Profile 20 FS (7495 - 7494)
  • Profile 30 FS (11905 - 11904)
  • Profile 30 INS (11905 - 11904)
  • Quest Plus FS WP4
  • Quest Plus INS WP4
  • Traditions T300P
  • Traditions TP300
  • Traditions TP340

Technical Specs

Volts 115
Amps .5
RPM 3000
Cycles 60Hz

Instructions

Assembly Instructions For Whitfield Convection Blower: 12146109-AMP

Replacing the SP4L-151-1 Blower in a Montage pellet stove:


The blower is located on the left side of the unit behind the control board side panel. The blower can be removed from the side, through the service panel or from the rear by removing the rear access panel. As always, when performing work on any stove, always unplug the unit from the power supply.


  • Locate the motor and find the four screws or nuts that secure the motor
  • Remove the screws or nuts
  • Unplug the blower from the wiring harness
  • Install new Blower to mounting post and tighten screws or nuts
  • Reconnect power

Troubleshooting

If your blower is buzzing or vibrating when it's on, remove it and look inside at the blower wheel, you may have something foreign caught in the blower wheel, such as a pellet. Hair and other debris should be removed from the blower wheel at least once a year. Symptoms of a poorly performing blower will be excessive noise, vibration or heat. If the blower is clean and you are still experiencing problems, replace the blower. In rare instances, the control board may be sending a modified waveform to the blower. If you replace the blower and the vibrations or excessive heat are still present, replace your controller.


Current versions of the SP4L-151-1 blower are a sealed bearing that requires no lubrication, though from time to time we do see parts come in from the manufacturer that are made to the original spec that requires lubrication. This will be indicated on the listing table attached to the blower.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Darin P.
Got it fast

Good product and received it on time

R
Ronald K.

Thank you !

L
Linda F.
Awesome!

Service was great! Fast response to order questions....shipped from USA to Canada no problem! Would highly reccommend and would use this company again. Thank you!

T
Terri P.
Blower motor

Came in fast. Young lady that helped me, was very pleasant and help me with what I needed. Got me the correct part. The only thing was it had the wrong plug on it.

C
Chris P.
Profile 30 parts order

I have received all the parts that I requested for my pellet stove. So far I have only installed the new exhaust blower(12050011-AMP). It was the same make as my old one and seems to work well. I'm not sure when I will install the rest..maybe later in the winter. The parts came in record time. I found the mail costs to Canada quite expensive considering that delivery in the USA is free. I blame Canada Post for that though. Thankyou.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Darin P.
Got it fast

Good product and received it on time

R
Ronald K.

Thank you !

L
Linda F.
Awesome!

Service was great! Fast response to order questions....shipped from USA to Canada no problem! Would highly reccommend and would use this company again. Thank you!

T
Terri P.
Blower motor

Came in fast. Young lady that helped me, was very pleasant and help me with what I needed. Got me the correct part. The only thing was it had the wrong plug on it.

C
Chris P.
Profile 30 parts order

I have received all the parts that I requested for my pellet stove. So far I have only installed the new exhaust blower(12050011-AMP). It was the same make as my old one and seems to work well. I'm not sure when I will install the rest..maybe later in the winter. The parts came in record time. I found the mail costs to Canada quite expensive considering that delivery in the USA is free. I blame Canada Post for that though. Thankyou.