Skip to main content
Skip to main content
Product title:

Comfort-Bilt Universal Control Panel (4-Pin Connector)

Product rating:
Product price:
$249.99
Product SKU ! CB-4-PIN-CONTROL BOARD
Product MPN ! CP2
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $302.96

Description

Comfortbilt Pellet Stove Replacement (4-Pin) Display Control Panel. This board fits models with a 4-pin USB style data cable connector. Stoves with a ribbon cable connection do not use this part. This replacement control panel is compatible with ComfortBilt pellet stoves manufactured after 2019 or that have upgraded to the new 4-pin style electronics.


Replacement For Part Numbers:

  • CP2
  • CP-40
  • CP-21
  • CP-22
  • CP-22i
  • CP-22N
  • CP-50
  • CP-61

Compatible Models

    ComfortBilt

  • HP21
  • HP22
  • HP22I
  • HP22N
  • HP40
  • HP41
  • HP42
  • HP50
  • HP50GC
  • HP55
  • HP61

Technical Specs

Instructions

Install Instructions For Comfort-Bilt Universal Control Panel (4-Pin Connector)

Board Install Instructions:

1.) Unplug the power from the stove.

2.) Apply gentle pressure to the board in an upward direction (This should allow the board to separate from the mounting bracket).

3.) Unplug the connector from the back of the board.

4.) Plug the connector into the new board.

5.) Position the board over the mounting screws and slide the board into place.

6.) Plug in the stove and follow the setup instructions.


Board Set-Up Instructions:

Combustion Settings:

  1. From the home screen, press and hold the Enter (left arrow) button until the Set data menu appears.
  2. Scroll down to #3 Set combustion and press Enter.
  3. If prompted for a password, use the following:  UP, DOWN, UP, UP, DOWN, UP
  4. The combustion levels will display at the top of the screen.  H01-H05 for heating levels, and IG01-IG03 for ignition levels.
  5. You can scroll up and down through these levels to get to the heating level you want to edit, and then lock in by pressing the enter key.
  6. Each level is edited independently of the other levels.  (for example, if you wanted to adjust only the 3 bar setting, you would only need to edit the numbers within H03)
  7. There are 3 metrics for every heating level:  1. Feed rate, 2. Exhaust voltage, and 3. Blower voltage. (Voltages range from 80V on the low to 115V on the high)
  8. Feed rate and exhaust voltages are directly related to the size and intensity of the fire (combustion), while the blower voltages are just for heat/air distribution (convection).
  9. Feed rates are displayed as an On and Off cycle, and expressed in 1/10's of seconds. (for example a feed rate of On 15, Off 45 means that the auger will feed pellets for 1.5 seconds, and then rest for 4.5 seconds for that specific level)
  10. Now adjust all the levels to match the following chart. (suggested settings)
  11. Now, press the Exit button (right arrow) to return to the set data menu, and then set the Ash cleaning cycles.


Click here for additional information on how to program your board!

Troubleshooting

Helpful Tips:

It is important to follow the steps called out in the programming guide when installing your new board. It may also be helpful to watch the clips found under the Videos tab above.

Click here for more information on setting up your new board!


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $79 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Comfortbilt Pellet Stove Replacement (4-Pin) Display Control Panel. This board fits models with a 4-pin USB style data cable connector. Stoves with a ribbon cable connection do not use this part. This replacement control panel is compatible with ComfortBilt pellet stoves manufactured after 2019 or that have upgraded to the new 4-pin style electronics.


Replacement For Part Numbers:

  • CP2
  • CP-40
  • CP-21
  • CP-22
  • CP-22i
  • CP-22N
  • CP-50
  • CP-61

Instructions

Install Instructions For Comfort-Bilt Universal Control Panel (4-Pin Connector)

Board Install Instructions:

1.) Unplug the power from the stove.

2.) Apply gentle pressure to the board in an upward direction (This should allow the board to separate from the mounting bracket).

3.) Unplug the connector from the back of the board.

4.) Plug the connector into the new board.

5.) Position the board over the mounting screws and slide the board into place.

6.) Plug in the stove and follow the setup instructions.


Board Set-Up Instructions:

Combustion Settings:

  1. From the home screen, press and hold the Enter (left arrow) button until the Set data menu appears.
  2. Scroll down to #3 Set combustion and press Enter.
  3. If prompted for a password, use the following:  UP, DOWN, UP, UP, DOWN, UP
  4. The combustion levels will display at the top of the screen.  H01-H05 for heating levels, and IG01-IG03 for ignition levels.
  5. You can scroll up and down through these levels to get to the heating level you want to edit, and then lock in by pressing the enter key.
  6. Each level is edited independently of the other levels.  (for example, if you wanted to adjust only the 3 bar setting, you would only need to edit the numbers within H03)
  7. There are 3 metrics for every heating level:  1. Feed rate, 2. Exhaust voltage, and 3. Blower voltage. (Voltages range from 80V on the low to 115V on the high)
  8. Feed rate and exhaust voltages are directly related to the size and intensity of the fire (combustion), while the blower voltages are just for heat/air distribution (convection).
  9. Feed rates are displayed as an On and Off cycle, and expressed in 1/10's of seconds. (for example a feed rate of On 15, Off 45 means that the auger will feed pellets for 1.5 seconds, and then rest for 4.5 seconds for that specific level)
  10. Now adjust all the levels to match the following chart. (suggested settings)
  11. Now, press the Exit button (right arrow) to return to the set data menu, and then set the Ash cleaning cycles.


Click here for additional information on how to program your board!

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $79 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
s
scott t.
Stove parts

All parts were right

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
s
scott t.
Stove parts

All parts were right

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid