Skip to main content
Skip to main content
Product title:

Harman Auger Feed Motor Made In USA By Gleason Avery (4 RPM CW): 3-20-60906-AMP

Product rating:
Product price:
$129.99

A $70.00 Savings over the OEM

Product SKU ! 706-GA-1
Product MPN ! 3-20-60906
Product availability: In Stock
Bullet point features

Frequently Bought Together

Total Price: $164.96

Description

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications where the motor is attached directly to the auger for the following models:

  • Invincible Insert, Invincible T, Invincible RS
  • Accentra Insert 
  • P35i, P35i-C
  • P38, P38+, PP38++
  • P43, P43-C 
  • P61, P61A, P61-C
  • P68 - pre serial: 008280309
  • PF100 Furnace - pre serial: 008350087
  • Accentra52i , Accentra52i-TC

  • Older feed motors dating prior to 2006 may use a feed/ auger motor that has a cooling fan on the back of the motor. Updated auger motors do not have this fan anymore as it is not required. Replacement fans for older auger motors is part # 3-20-08791
  • Accentra-Cast, XXV and the Advance made before 2009 use an indirect chain-drive feed system and require a CCW spinning motor, part # 3-20-08752.
  • Accentra FS, XXV and Advance made in 2009 and after have the redesigned UL feeder body and use auger motor part # 3-20-00677 
  • P68 pellet stoves (Pre serial # 008280309) used this motor. Current P68 units (After serial # 008280308) have a 6 RPM auger motor part # 3-20-09302
  • This information is included in a 2008 Technical Update from Harman


Replacement For Part Number:

  • 3-20-60906

View Compatible Models

UPC:  652174670468

Compatible Models

    Harman

  • Accentra 52i
  • Accentra 52i TC
  • Accentra Insert
  • DVC 500
  • Invincible Insert
  • Invincible RS
  • Invincible T
  • P35i
  • P35i-C
  • P38 (Post: 008080066)
  • P38+
  • P43
  • P43-C
  • P61-A (Post: 008085055)
  • P61-C (Post: 008085803)
  • P61A (Post: 008085803)
  • P68 (Pre: 008280309)
  • PC45
  • Pellet Pro II
  • PF100
  • PF120
  • Super Magnum Stoker

    Legacy Stoves

  • Super Magnum Stoker

Technical Specs

RPM 4RPM
Direction CW
Volts 120V AC
Amps .72
Shaft 3/8" Dia. x 1 1/8" Length
Connector 2 Female Wire Leads
Cycle 60Hz

Instructions

Install Instructions For Harman Auger Feed Motor Made In USA By Gleason Avery (4 RPM CW): 3-20-60906-AMP

To replace the feed motor:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. Locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  5. The mounting frame will need to be transferred to the new motor, take a picture of the old motor with the mounting bracket attached for reference.
  6. Reinstall the the new feed motor with mounting bracket attached, connect to the auger shaft with the 7/16" set screw on the roller cam assembly

Troubleshooting

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications where the motor is attached directly to the auger for the following models:

  • Invincible Insert, Invincible T, Invincible RS
  • Accentra Insert 
  • P35i, P35i-C
  • P38, P38+, PP38++
  • P43, P43-C 
  • P61, P61A, P61-C
  • P68 - pre serial: 008280309
  • PF100 Furnace - pre serial: 008350087
  • Accentra52i , Accentra52i-TC

  • Older feed motors dating prior to 2006 may use a feed/ auger motor that has a cooling fan on the back of the motor. Updated auger motors do not have this fan anymore as it is not required. Replacement fans for older auger motors is part # 3-20-08791
  • Accentra-Cast, XXV and the Advance made before 2009 use an indirect chain-drive feed system and require a CCW spinning motor, part # 3-20-08752.
  • Accentra FS, XXV and Advance made in 2009 and after have the redesigned UL feeder body and use auger motor part # 3-20-00677 
  • P68 pellet stoves (Pre serial # 008280309) used this motor. Current P68 units (After serial # 008280308) have a 6 RPM auger motor part # 3-20-09302
  • This information is included in a 2008 Technical Update from Harman


Replacement For Part Number:

  • 3-20-60906

View Compatible Models

UPC:  652174670468

Compatible Models

    Harman

  • Accentra 52i
  • Accentra 52i TC
  • Accentra Insert
  • DVC 500
  • Invincible Insert
  • Invincible RS
  • Invincible T
  • P35i
  • P35i-C
  • P38 (Post: 008080066)
  • P38+
  • P43
  • P43-C
  • P61-A (Post: 008085055)
  • P61-C (Post: 008085803)
  • P61A (Post: 008085803)
  • P68 (Pre: 008280309)
  • PC45
  • Pellet Pro II
  • PF100
  • PF120
  • Super Magnum Stoker

    Legacy Stoves

  • Super Magnum Stoker

Technical Specs

RPM 4RPM
Direction CW
Volts 120V AC
Amps .72
Shaft 3/8" Dia. x 1 1/8" Length
Connector 2 Female Wire Leads
Cycle 60Hz

Instructions

Install Instructions For Harman Auger Feed Motor Made In USA By Gleason Avery (4 RPM CW): 3-20-60906-AMP

To replace the feed motor:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. Locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  5. The mounting frame will need to be transferred to the new motor, take a picture of the old motor with the mounting bracket attached for reference.
  6. Reinstall the the new feed motor with mounting bracket attached, connect to the auger shaft with the 7/16" set screw on the roller cam assembly

Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $99!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
William T.
Anger motor

Awsome!

D
Doug R.
Great parts store

Love doing business with them

M
M.R.
Great service, pricing and support

I ordered this part and a few others. The website is very well laid out and makes it easy to find the parts you need. You can’t beat the service and you can’t beat the price!

M
Matthew G.
Very satisfied

Very happy with how quick everything was delivered and I couldn’t ask for better quality replacement parts!

S
SS
Best Company to order from

I have ordered many parts from Stove & Grill parts for less. I have never had a problem with the parts. They are very efficient on shipping your part to you as quick as they can. I don’t have any thing bad at all to say.

12

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
William T.
Anger motor

Awsome!

D
Doug R.
Great parts store

Love doing business with them

M
M.R.
Great service, pricing and support

I ordered this part and a few others. The website is very well laid out and makes it easy to find the parts you need. You can’t beat the service and you can’t beat the price!

M
Matthew G.
Very satisfied

Very happy with how quick everything was delivered and I couldn’t ask for better quality replacement parts!

S
SS
Best Company to order from

I have ordered many parts from Stove & Grill parts for less. I have never had a problem with the parts. They are very efficient on shipping your part to you as quick as they can. I don’t have any thing bad at all to say.

12
Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid