Harman Invincible Insert Pellet Stove Repair and Replacement Parts

Anderol 465 Synthetic Bearing Oil We sell the Anderol synthetic bearing oil for Fasco and other pellet stove blower motors that require oil lubric...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Replacement Burn Pot and Tailpipe Gasket for Harman Stoves. This item contains one gasket for the exhaust tailpipe and one gasket for the burnpot. ...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

Flame Guide For Harman & Eco-Choice Pellet Stoves Part # 3-00-08534. This flame guide Fits P61A, Accentra & Others as shown on the "Compati...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

Flame Guide For Harman & Eco-Choice Pellet Stoves Part # 3-00-08534. This flame guide Fits P61A, Accentra & Others as shown on the "Compati...

This room-temperature sensor is required by all Harman pellet stoves and inserts to use the "Room Temp" or "Automatic" mode setting on older units ...

This knob and post set is compatible with all Harman pellet stoves, boilers, and furnaces that do not have a touchscreen controller. Every applicat...

Harman Burn Pot Scraper for Harman Pellet Stoves, 2-00-773850 This burn pot scraper is used to scrape the ash and creosote from the Harman burn pot...

Replacement Harman Black Exhaust Sensing Probe (ESP) for select pellet stoves. A 3 blink error code means that the control board has not detected t...

Replacement silicone docking gasket for all Harman pellet stove inserts. Older versions of this gasket were red in color, this is the replacement f...

Harman Black ESP Probe Replaces part# 1-00-00744  Exhaust thermistor probe ESP, Black Wire *You must order the same color thermister probe as the...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This distribution blower is a replacement part for the Harman Accentra Inserts made from 2003-2012 & The Harman older Invincible Inserts. This ...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This 6 Amp, 30mm, control board fuse is located on the backside of your Harman Stove Circuit board. Most controllers, Revisions A-D, which were use...

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

Harman Burn Pot Gasket, 1-00-07381 (Burn Pot Gasket Only) The burn pot gasket goes between the burn pot and the body of the stove and prevents comb...

This version of the ESP is the correct part for any model made after 2008. This updated ESP has red wires, as opposed to the previous probes which ...

This Harman Pellet Stove Hopper Lid Gasket is compatible with all Harman stoves and inserts that have a glass hopper lid and the 60 Series HHT Boil...

Replacement Tailpipe Gasket for Harman Stoves. This is the gasket that seals the stove to the appliance collar (tailpipe) that connects to the vent...

Replacement 1/4-20 X 5/8 thumb screw / wingscrew for Harman and Heatilator Eco Choice stoves. Used on most pellet stoves to hold the cleanout cover...

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications ...

This replacement part replaces part # 3-21-47120. This is a motor only and will fit into the existing housing of your stove or insert. Early versio...

This room-temperature sensor is required by all Harman pellet stoves and inserts to use the "Room Temp" or "Automatic" mode setting on older units...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Harman Accentra, XXV 52i & Accentra Insert Glass Gasket Replacement glass gasket for Harman stoves. 3/16 x 10' with PSA self adhesive. Harman ...

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

Circuit board for non-ignition P61, Invincible RS, Invincible FS, Invincible Insert, P38+, retrofit P38's that became P38+ and Mag Stoker Coal stov...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

Harman Pellet Stove Replacement Flue Tube / Heat Exchanger tube cleaning brush for Harman stoves. Fits Harman: Accentra Insert, Invincible Insert, ...

This 1/4" 10ft. Glass Gasket with Adhesive Is For Harman Stoves.

This decorative 3-log set replaces the clay fire brick inside the firebox of P Series freestanding pellet stoves. The logs are used in place of the...

This is the complete distribution fan assembly with motor, fan wheel, and housing for the INvincible and Accentra Pellet Inserts and The Harman Mag...

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications...

This 5 Amp, 20mm control board fuse is located on the backside of your Harman Stove Circuit board. All units made after 2013, with controllers Revi...

This Harman combustion blower motor assembly comes with a new motor housing. If your old housing is still in good shape it can be reused. If the sc...

This Harman combustion blower motor assembly comes with a new motor housing. If your old housing is still in good shape it can be reused. If the sc...

Harman replacement wooden handle with screwHarman Pellet Stoves: Invincible Insert Invincible T P38 (Pre serial # 10327) Harman Coal and Wo...

Harman Room Sensor Probe Extension 14FT, 3-20-674101 This sensor can be used with Harman pellet stoves and inserts to lengthen the distance of the ...

5' long x 5/8" wide Flat glass gasket for Harman older coal and pellet units. This gasket is commonly known as glass tape. It has a self-adhesive b...

Feeder air crossover tube kit for Harman pellet stove and inserts and Heatilator Eco Choice pellet boilers. Kit Includes: 8-1/2" of 9mm silicone t...

This cooling fan came with older model auger feed motors. Updated auger motors do not require this part and many do not have a post to attach it to.

This Harman Polished Chrome Knob replacement part is compatible with the following Harman stoves but could be installed on any Harman stove that us...

Replacement Harman burnpot weldment assembly for the P61A. Also, substitute for Pellet Pro II, and all Invincible Stoves and Inserts. The original ...