Harman Magnum (44 Mag) Coal Stove Repair & Replacement Parts

Harman 3/8" x 10FT Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Check out the compatible sto...

This 5" combustion blower fan blade is a double-sided impeller that is used on most freestanding Harman Pellet Stoves. Includes a set screw for mou...

Replacement distribution (convection) blower for Harman Pellet Stoves that use Part# 3-21-33647. This blower is mounted without a gasket in all app...

Replacement Harman Black Exhaust Sensing Probe (ESP) for select pellet stoves. A 3 blink error code means that the control board has not detected t...

This is a flat braided gasket that is 1/4" wide and 7.5' long with an adhesive backing. Harman uses this gasket to create an air seal between the d...

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

This bearing is part of the Harman feed system. It goes on the armature that turns the auger.

Harman 3/8" Replacement Pellet Stove and Wood Stove Door Rope & Ash Pan Gasket. See our compatible stoves tab for compatibility.

Replacement Harman Black Exhaust Sensing Probe (ESP) for select pellet stoves. A 3 blink error code means that the control board has not detected t...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please ...

This latch expands when latched down to hold the hopper lid closed while making an air-tight seal. Used on many pellet stoves, coal stokers, furnac...

This is a flat braided gasket that is 1/4" wide and 15' long with an adhesive backing. Harman uses this gasket to create an air seal between the do...

Harman Distribution Blower for many units, see our stove compatibility tab. The distribution blower is also known as the room air blower or convect...

Replacement Pyroceramic Glass for Harman P38, P43, PC45, and P61 Pellet Stoves and Magnum 44 Coal Stoker. Measures 9 1/2" high x 13 5/16" wide, wit...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

Replacement hopper lid gasket for Harman Pellet and Coal Stoves. Measures 5 feet long with self-adhesive backing. This is also the gasket you want ...

Replacement Pyroceramic Glass for Harman P38, P43, PC45, and P61 Pellet Stoves and Magnum 44 Coal Stoker. Measures 9 1/2" high x 13 5/16" wide, wit...

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please r...

This retainer is used to secure the bearing of the auger shaft assembly to the feeder body weldment. Use on all Harman pellet burning stoves, inser...

Replacement 1/2 pillow block for Harman stoves.

The Cast Pawl Door Handle is the assembly commonly found on all Harman P Series Stoves made roughly around 2013 and after and was sold as a retrofi...

The Cast Pawl Door Handle is the assembly commonly found on all Harman P Series Stoves made roughly around 2013 and after and was sold as a retrofi...

Cast cam block for older style, pre-UL feeder body pellet stoves, and inserts. Accentra Cast - pre serial number: 008400001 Advance - pre serial...

This is the auger feed motor mount for the older style Pre-UL feeder body for stoves and inserts made prior to 2009. Accentra-Cast - pre serial #...

Replacement 5/16”-18 Grade 8 Yellow Zinc Finished Hex Nut for installing Harman burnpots to the welded threaded posts. Requires QTY of 4 per applic...

Replacement Pyroceramic Glass for Harman P38, P43, PC45, and P61 Pellet Stoves and Magnum 44 Coal Stoker. Measures 9 1/2" high x 13 5/16" wide, wit...

Brushed stainless louver trimfor the following Harman stoves:PC45, P61A, P68

Decorate your harman stove with this 12" X 6" Trail Riders Slate Tile for Harman Stoves P43 PC45 P61 P61A P68 TL200 (Exception) TL300 TL 2.0 TL 2....

Replacement Tek Coated Self-Tapping Stainless Steel Screw 10 x 3/4" for Harman Pellet Stoves. This is the most common self-tapping screw used on Ha...

Bright nickel louver trim 3-43-08648-8for the following Harman stoves: PC45, P61A, P68

Replacement 1/2" ID grommet for Harman pellet stoves. Used with part # 1-00-247406 - UL feeder / auger motor bracket. Sold per one.

Replacement  #8-18 x 1/2” Hex Washer Head Self Drilling Zinc Screw for Harman PB105 panel construction on Harman Pellet Furnaces and Boilers. May a...

Replacement 1/4-20 Zinc Plated Serrated Flange Lock Nut for securing cast iron panels to stove bodies and Accentra insert surround panels. Has othe...