Please read this section and compare against your stove's serial number to be sure you are getting the correct part!
Some models had more than one change. There may be up to three (3) different auger shaft assembly part numbers for some models.
Stove and insert models introduced after 2009 all use auger shaft assembly 3-50-00565. Those models are:
Models manufactured prior to 2009 phased over to this shaft assembly according to the following serial numbers:
Indirect UL Feeder Body Change: Indirect UL Tech Bulletin Dec. 12, 2008 - PDF
Accentra-Cast Freestanding - Beginning serial number: 008400001
Advance - Beginning serial number: 0083600001
XXV - Serial numbers: 12871 thru 12939 and beginning 008200001
Direct UL Feeder Body Change: Direct UL Tech Bulletin Dec. 22, 2008 - PDF
Accentra Insert - beginning serial number: 008240096
P38 - beginning serial number: 008080620
P61/P61A - beginning serial number: 008085092
P68 - beginning serial number: 008280309
PF100 Furnace - beginning serial number: 008350087
-If you have the Advance, Accentra-Cast (Freestanding- Sometimes referred to as the Accentra2) or XXV and your serial number precedes those listed above, you have the older style indirect feed system (Chain and sprockets). The Auger assembly for your stove (Originally Part# 3-50-00365) is now part # 3-50-00465.
-If you have the P38, P61, P61A, P68, or the PF100 Pellet Furnace with a serial number that precedes those listed above, you are going to have the older style large feeder body system, and the correct auger shaft assembly will be 3-50-00465.
Whenever an auger assembly is replaced, the auger feed motor should also be replaced. Replace these two parts as pairs. Here is a list of all of the different motors that are paired with the 3-50-00565 auger shaft assembly:
Replacement For Part Number:
Click To See Compatible Models