Harman Auger Feed Motor 4RPM CW, 3-20-60906-AMP

This 4 RPM auger feed motor has a clockwise rotation (CW) as viewed from the shaft side. This motor is used ONLY used in direct drive applications where the motor is attached directly to the auger for the following models:

• Invincible Insert, Invincible T, Invincible RS
• Accentra Insert 
• P35i, P35i-C
• P38, P38+, PP38++
• P43, P43-C 
• P61, P61A, P61-C
• P68 - pre serial: 008280309
• PF100 Furnace - pre serial: 008350087
• Accentra52i , Accentra52i-TC

• Older feed motors dating prior to 2006 may use a feed/ auger motor that has a cooling fan on the back of the motor. Updated auger motors do not have this fan anymore as it is not required. Replacement fans for older auger motors is part # 3-20-08791
• Accentra-Cast, XXV and the Advance made before 2009 use an indirect chain-drive feed system and require a CCW spinning motor, part # 3-20-08752.
• Accentra FS, XXV and Advance made in 2009 and after have the redesigned UL feeder body and use auger motor part # 3-20-00677 
• P68 pellet stoves (Pre serial # 008280309) used this motor. Current P68 units (After serial # 008280308) have a 6 RPM auger motor part # 3-20-09302
• This information is included in a 2008 Technical Update from Harman

• 3-20-60906

Need to upgrade or replace your wiring & connectors?

Shop for connectors, adapters, service tools, and more. Shop now

Compatible Models

To replace the feed motor:

1. Unplug your stove
2. If there are pellets in the hopper
3. Gain access to the rear of the stove
4. Locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
5. The mounting frame will need to be transferred to the new motor, take a picture of the old motor with the mounting bracket attached for reference.
6. Reinstall the the new feed motor with mounting bracket attached, connect to the auger shaft with the 7/16" set screw on the roller cam assembly

When Will My Order Ship

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 1PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Is Expedited Shipping Available?

We offer both overnight and two day air shipping services for all orders placed within the Continental United States. For information on shipping cut-off times, go to our shipping page.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.