Skip to main content
Skip to main content
Product title:

Harman Feed Auger Shaft Assembly: 3-50-00465

Product rating:
Product price:
$219.99
Product SKU ! 3-50-00465
Product MPN ! 3-50-00465
Only 7 Left In Stock
Bullet point features

Frequently Bought Together

Description

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please read this entire description or print off a copy of the PDF links at the bottom to compare against your stove's serial number to be sure you are getting the correct part.

Your owner's manual can be confusing because the older part numbers AND the updated part numbers are each listed in the most current manuals. 

New stove and insert models introduced after 2009 all use the 3-50-00565 auger shaft assembly. Part 3-50-00465 is used in the following stoves and inserts:

  • Accentra Insert - Pre serial number: 008240096
  • P38 - Pre serial number: 008080620
  • P61/P61A -Pre serial number: 008085092
  • P68 - Pre serial number: 008280309
  • PF100 - Pre serial number: 008350087

 

Some stove and inserts models were never updated to the UL feeder body because they were obsolete by 2009. Other models were discontinued at that time. These models all use the 3-50-00465 auger shaft assembly, they include:

  • P61 uses 3-50-00465 (no automatic ignition) became the P61A which used both assemblies, see serial pre/post serial for P61A
  • Invincible T, Invincible RS, Invincible Insert, Pellet Pro II all use 3-50-00465
  • PC45 Multi-fuel Pellet/Corn stove uses 3-50-00465

Stove and insert models listed above with serial numbers proceeding this list will all use auger shaft assembly 3-50-00565. Direct UL Tech Bulletin Dec. 22, 2008 - PDF

Auger shaft assembly, part # 3-50-00465 is also used for ALL indirect, 'chain driven' feed systems for the XXV, Accentra-Cast (also called Accentra 2 in some manuals)and, the Advance.

  • The original part # for all indirect feed systems (chain and sprocket) was part # 3-50-00365. This part # was updated in 2009 to part # 3-50-00465 to reflect the change to the re-designed direct drive UL feeder bodies.
  • XXV, Accentra-Cast, and Advance units with the direct drive auger motor (no chain) all use the auger shaft assembly, part # 3-50-00565.

Whenever an auger assembly is replaced, the auger feed motor should also be replaced. Replace these two parts as pairs. Here is a list of all of the different motors that are paired with the 3-50-00465 auger shaft assembly:

  • Accentra-Cast Freestanding - pre serial number: 008400001 | Auger Motor: 3-20-08752
  • Advance - pre serial number: 0083600001 | Auger Motor: 3-20-08752
  • XXV - pre serial number: 12871 | Auger Motor: 3-20-08752
  • Accentra Insert - pre serial number: 008240096 | Auger Motor: 3-20-60906
  • P38 - pre serial number: 008080620 | Auger Motor: 3-20-60906
  • P61/P61A - pre serial number: 008085092 | Auger Motor: 3-20-60906
  • P68 - pre serial number: 008280309 | Auger Motor: 3-20-60906, (P68 models beginning serial 008280309, see part# 3-50-00565 for correct auger motor)
  • PF100 Furnace - pre serial number: 008350087 | Auger Motor: 3-20-60906 (PF100 models beginning serial 008350087, see part# 3-50-00565 for correct auger motor)

All of the following pellet stoves and inserts were introduced AFTER 2009 and will use shaft assembly 3-50-00565.

  • Accentra52i
  • Accentra52i-TC
  • Absolute43
  • Absolute43-C
  • P35i
  • P35i-C
  • P43
  • P43-C
  • Allure50
  • Absolute63
  • P61-C
  • Accentra-Cast-C
  • P68-C


Replacement For Part Numbers:

  • 3-50-00465
  • 3-50-00365

View Compatible Models

UPC: 652174636686

Compatible Models

    Harman

  • Accentra Cast FS
  • Accentra Insert
  • Advance
  • Invincible Insert
  • Invincible RS
  • Invincible T
  • Magnum (44 Mag)
  • P38 (Pre: 008080066)
  • P38+
  • P61-A (Pre: 008085055)
  • P61A (Pre: 008085092)
  • P68 (Pre: 008280309)
  • PC45
  • Pellet Pro II
  • PF100 (Pre: 004350582 or 008350087)
  • XXV (Pre: 12871)

Technical Specs

Receiving Shaft OD 5/16"

Instructions

Install Instructions For Harman Feed Auger Shaft Assembly: 3-50-00465

To replace the feed auger shaft:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. If your stove has a chain driven feed system, the chain will need to be removed by loosening the white tensioner block from under the chain to create slack and removing the left-side sprocket from the feed motor by loosening the 1/8" allan key screw in the hub of the drive sprocket
  5. If you have direct drive (motor attached directly to the auger shaft), locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  6. Open the the fines collection box access door and remove
  7. Lift on the feed plate pusher arm to extend the feed plate out of the feeder body weldment. Remove the feed plate. Sometimes the crossover hose may restrict the full motion of the pusher arm. If so, gently push the hose out of the way so that the pusher arm can be rotated up and fully to the left
  8. Locate the two 1/2" hex screws on the mounting ring that hold the auger shaft in to the feeder weldment. remove these two screws, then remove the mounting ring. Note: different models have different way in which these mounting screws fasten to the weldment. If nuts or threaded couplers are used, locate them and set them, aside, they will be needed to secure the mounting ring again.
  9. Pull the auger shaft from the feeder body. If the auger shaft is difficult to pull out, the shaft can be freed by striking the auger itself with a wooden dowel from inside the the firebox. This will break the seal and allow the auger to come out.
  10. Install your auger shaft. Secure the mounting ring back into the stove and tighten the two hex screws to a uniformed torque (equal tightness)
  11. Reinstall the feed plate and drop the pusher arm down
  12. Reinstall the cam set screw assembly on the auger shaft, with secondary sprocket attached if your stove has a chain drive assembly
  13. Reinstall the auger motor or sprocket assembly and connect to the auger shaft with the 7/16" set screw
  14. Reinstall the drive sprocket and chain if you have a chain drive system and adjust the chain tensioner


Troubleshooting

Why would you need to replace your auger shaft? Typically, this is not a part that is replaced and it should last the life of your stove. That said, there are a few scenarios where the shaft will require replacement.

  • Flighting on shaft is broken at the front weld or tip
  • Auger is worn down
  • Feed system had a jam that damaged the auger
  • Feeder body is being replaced


Some stove models that used the '00675' burn pots made in 2006-2008 may have a "5-hole" burnpot. Harman made a change to the burnpot design in these two stove models. This change caused some problems that were not evident for many years later. The faulty burn pots will have 5 holes at the base of the slope, directly in front of the opening for the feed tube in front of the auger. These holes allowed the fire to burn too low and too hot in the burn pot resulting in the auger shaft actually melting away at the tip.



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

This is the auger shaft assembly that moves the pellets from the hopper to the burnpot. We get a lot of people ordering the wrong shaft so please read this entire description or print off a copy of the PDF links at the bottom to compare against your stove's serial number to be sure you are getting the correct part.

Your owner's manual can be confusing because the older part numbers AND the updated part numbers are each listed in the most current manuals. 

New stove and insert models introduced after 2009 all use the 3-50-00565 auger shaft assembly. Part 3-50-00465 is used in the following stoves and inserts:

  • Accentra Insert - Pre serial number: 008240096
  • P38 - Pre serial number: 008080620
  • P61/P61A -Pre serial number: 008085092
  • P68 - Pre serial number: 008280309
  • PF100 - Pre serial number: 008350087

 

Some stove and inserts models were never updated to the UL feeder body because they were obsolete by 2009. Other models were discontinued at that time. These models all use the 3-50-00465 auger shaft assembly, they include:

  • P61 uses 3-50-00465 (no automatic ignition) became the P61A which used both assemblies, see serial pre/post serial for P61A
  • Invincible T, Invincible RS, Invincible Insert, Pellet Pro II all use 3-50-00465
  • PC45 Multi-fuel Pellet/Corn stove uses 3-50-00465

Stove and insert models listed above with serial numbers proceeding this list will all use auger shaft assembly 3-50-00565. Direct UL Tech Bulletin Dec. 22, 2008 - PDF

Auger shaft assembly, part # 3-50-00465 is also used for ALL indirect, 'chain driven' feed systems for the XXV, Accentra-Cast (also called Accentra 2 in some manuals)and, the Advance.

  • The original part # for all indirect feed systems (chain and sprocket) was part # 3-50-00365. This part # was updated in 2009 to part # 3-50-00465 to reflect the change to the re-designed direct drive UL feeder bodies.
  • XXV, Accentra-Cast, and Advance units with the direct drive auger motor (no chain) all use the auger shaft assembly, part # 3-50-00565.

Whenever an auger assembly is replaced, the auger feed motor should also be replaced. Replace these two parts as pairs. Here is a list of all of the different motors that are paired with the 3-50-00465 auger shaft assembly:

  • Accentra-Cast Freestanding - pre serial number: 008400001 | Auger Motor: 3-20-08752
  • Advance - pre serial number: 0083600001 | Auger Motor: 3-20-08752
  • XXV - pre serial number: 12871 | Auger Motor: 3-20-08752
  • Accentra Insert - pre serial number: 008240096 | Auger Motor: 3-20-60906
  • P38 - pre serial number: 008080620 | Auger Motor: 3-20-60906
  • P61/P61A - pre serial number: 008085092 | Auger Motor: 3-20-60906
  • P68 - pre serial number: 008280309 | Auger Motor: 3-20-60906, (P68 models beginning serial 008280309, see part# 3-50-00565 for correct auger motor)
  • PF100 Furnace - pre serial number: 008350087 | Auger Motor: 3-20-60906 (PF100 models beginning serial 008350087, see part# 3-50-00565 for correct auger motor)

All of the following pellet stoves and inserts were introduced AFTER 2009 and will use shaft assembly 3-50-00565.

  • Accentra52i
  • Accentra52i-TC
  • Absolute43
  • Absolute43-C
  • P35i
  • P35i-C
  • P43
  • P43-C
  • Allure50
  • Absolute63
  • P61-C
  • Accentra-Cast-C
  • P68-C


Replacement For Part Numbers:

  • 3-50-00465
  • 3-50-00365

View Compatible Models

UPC: 652174636686

Compatible Models

    Harman

  • Accentra Cast FS
  • Accentra Insert
  • Advance
  • Invincible Insert
  • Invincible RS
  • Invincible T
  • Magnum (44 Mag)
  • P38 (Pre: 008080066)
  • P38+
  • P61-A (Pre: 008085055)
  • P61A (Pre: 008085092)
  • P68 (Pre: 008280309)
  • PC45
  • Pellet Pro II
  • PF100 (Pre: 004350582 or 008350087)
  • XXV (Pre: 12871)

Technical Specs

Receiving Shaft OD 5/16"

Instructions

Install Instructions For Harman Feed Auger Shaft Assembly: 3-50-00465

To replace the feed auger shaft:

  1. Unplug your stove
  2. If there are pellets in the hopper
  3. Gain access to the rear of the stove
  4. If your stove has a chain driven feed system, the chain will need to be removed by loosening the white tensioner block from under the chain to create slack and removing the left-side sprocket from the feed motor by loosening the 1/8" allan key screw in the hub of the drive sprocket
  5. If you have direct drive (motor attached directly to the auger shaft), locate the 7/16" motor set screw on the roller cam assembly and loosen it. Disconnect the wires from the motor to the wiring harness and pull on the auger motor. The motor will uninstall with the mounting frame attached to the motor, set this aside.
  6. Open the the fines collection box access door and remove
  7. Lift on the feed plate pusher arm to extend the feed plate out of the feeder body weldment. Remove the feed plate. Sometimes the crossover hose may restrict the full motion of the pusher arm. If so, gently push the hose out of the way so that the pusher arm can be rotated up and fully to the left
  8. Locate the two 1/2" hex screws on the mounting ring that hold the auger shaft in to the feeder weldment. remove these two screws, then remove the mounting ring. Note: different models have different way in which these mounting screws fasten to the weldment. If nuts or threaded couplers are used, locate them and set them, aside, they will be needed to secure the mounting ring again.
  9. Pull the auger shaft from the feeder body. If the auger shaft is difficult to pull out, the shaft can be freed by striking the auger itself with a wooden dowel from inside the the firebox. This will break the seal and allow the auger to come out.
  10. Install your auger shaft. Secure the mounting ring back into the stove and tighten the two hex screws to a uniformed torque (equal tightness)
  11. Reinstall the feed plate and drop the pusher arm down
  12. Reinstall the cam set screw assembly on the auger shaft, with secondary sprocket attached if your stove has a chain drive assembly
  13. Reinstall the auger motor or sprocket assembly and connect to the auger shaft with the 7/16" set screw
  14. Reinstall the drive sprocket and chain if you have a chain drive system and adjust the chain tensioner


Troubleshooting

Why would you need to replace your auger shaft? Typically, this is not a part that is replaced and it should last the life of your stove. That said, there are a few scenarios where the shaft will require replacement.

  • Flighting on shaft is broken at the front weld or tip
  • Auger is worn down
  • Feed system had a jam that damaged the auger
  • Feeder body is being replaced


Some stove models that used the '00675' burn pots made in 2006-2008 may have a "5-hole" burnpot. Harman made a change to the burnpot design in these two stove models. This change caused some problems that were not evident for many years later. The faulty burn pots will have 5 holes at the base of the slope, directly in front of the opening for the feed tube in front of the auger. These holes allowed the fire to burn too low and too hot in the burn pot resulting in the auger shaft actually melting away at the tip.



Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping!

HOLIDAY UPDATE
Due to the upcoming Christmas and New Years holidays, shippers will not be picking up on the dates below. Additionally, packages may take longer to arrive than expected. We appreciate your understanding and patience during this time.

  • USPS: No pickup on Dec 24th, Dec 25th, and Jan 1st.
  • UPS: No pickup on Dec 24th (except NDA and 2nd Day), Dec 25th, Dec 31st (except NDA and 2nd Day), and Jan 1st.
CANADA UPDATE

Due to the ongoing Canada Post postal workers' strike, we are forced to suspend all ordering to Canada. Please be advised that any shipments that did not clear U.S. customs by November 15th will be delayed until Canada Post is fully operational. We appreciate your understanding and patience during this time.

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $49 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Russell W.

Harman Feed Auger Shaft Assembly, 3-50-00465

A
Anonymous
auger

it fit perfectly and the stove is up and running again.

A
Anonymous
It came like they said it would

I was very pleased both with the online experience, and the prompt shipping of the part that I ordered. This is a company that really values customer service...

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form

Have a Question?

Be the first to ask a question about this.

Ask a Question

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Russell W.

Harman Feed Auger Shaft Assembly, 3-50-00465

A
Anonymous
auger

it fit perfectly and the stove is up and running again.

A
Anonymous
It came like they said it would

I was very pleased both with the online experience, and the prompt shipping of the part that I ordered. This is a company that really values customer service...

Liquid error (layout/theme line 255): Could not find asset snippets/iStock-notify-me.liquid