Install Instructions For Harman Burn Pot And Tailpipe Gasket: 1-00-07381
To change the burnpot gasket:
If your stove has auto-ignition, you are going to want to unplug the stove first.
If you have an igniter, from the back of the stove, cut the zip ties on the wiring harness that cinches up the excess light blue and yellow wires. Follow the yellow wire to where it passes through the stove wall on the rear of the stove and push the excess yellow and light blue wires into the stove. If you have a black plastic plug with silicone around it, you may have to pry this plug out to free the wires so they will slip past and then push the excess length into the stove.
Remove the flame guide
Locate the four 1/2" nuts at each corner of the burnpot
Remove these nuts. Make sure you do not lose them or the serrated washers behind the nuts. Set them aside.
Gently put them burnpot away from the back of the stove. If you have an igniter, there will be ignition wires attached to the burnpot. Lower the burnpot until the yellow and light blue wires are visible and then disconnect the wires. Do not push the wires back into the stove as you will need to reconnect the wires after installing the new gasket.
If you plan on changing the igniter anytime soon, this would be a great time to do it as the wiring is free and accessible.
Scrape any old gasket from the refractory wall.
Install the new gasket. Make sure to knock out the two loose tabs in the gasket. For most stoves, these tabs are not cut away for anything. This gasket is also used in some boilers and those cutouts are used for that install...but if you leave them in, they may come loose and clog the primary air channels built into some burnpot.
Once the gasket is installed, reconnect your igniter wires and pull the extra length back until the disconnects reach the rear of the stove. Reinstall the wire plug if you removed it.
Install the burn pot on the threaded posts and secure with the serrated washers and nuts you removed in step 5.
Reinstall flame guide. If your flame guide is discolored to a mahogany color, if it is cracked or warped or if it is flaking, replace the guide with the appropriate one for your stove. There are a total of three different types so make sure you get the correct one for your stove.
Troubleshooting
Things to look for to know when it's time to change this gasket:
ignition time is longer than normal
smoke is visible at the rear of the burn pot during ignition
excessive amounts of carbon is building up around the post and nuts that secure the pot to the stove (not sealing)
you haven't changed the gasket in 10 years
you are changing or you have removed your burnpot
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Information
This Item Qualifies For Free Shipping With
Orders Over $99!
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
Install Instructions For Harman Burn Pot And Tailpipe Gasket: 1-00-07381
To change the burnpot gasket:
If your stove has auto-ignition, you are going to want to unplug the stove first.
If you have an igniter, from the back of the stove, cut the zip ties on the wiring harness that cinches up the excess light blue and yellow wires. Follow the yellow wire to where it passes through the stove wall on the rear of the stove and push the excess yellow and light blue wires into the stove. If you have a black plastic plug with silicone around it, you may have to pry this plug out to free the wires so they will slip past and then push the excess length into the stove.
Remove the flame guide
Locate the four 1/2" nuts at each corner of the burnpot
Remove these nuts. Make sure you do not lose them or the serrated washers behind the nuts. Set them aside.
Gently put them burnpot away from the back of the stove. If you have an igniter, there will be ignition wires attached to the burnpot. Lower the burnpot until the yellow and light blue wires are visible and then disconnect the wires. Do not push the wires back into the stove as you will need to reconnect the wires after installing the new gasket.
If you plan on changing the igniter anytime soon, this would be a great time to do it as the wiring is free and accessible.
Scrape any old gasket from the refractory wall.
Install the new gasket. Make sure to knock out the two loose tabs in the gasket. For most stoves, these tabs are not cut away for anything. This gasket is also used in some boilers and those cutouts are used for that install...but if you leave them in, they may come loose and clog the primary air channels built into some burnpot.
Once the gasket is installed, reconnect your igniter wires and pull the extra length back until the disconnects reach the rear of the stove. Reinstall the wire plug if you removed it.
Install the burn pot on the threaded posts and secure with the serrated washers and nuts you removed in step 5.
Reinstall flame guide. If your flame guide is discolored to a mahogany color, if it is cracked or warped or if it is flaking, replace the guide with the appropriate one for your stove. There are a total of three different types so make sure you get the correct one for your stove.
Troubleshooting
Things to look for to know when it's time to change this gasket:
ignition time is longer than normal
smoke is visible at the rear of the burn pot during ignition
excessive amounts of carbon is building up around the post and nuts that secure the pot to the stove (not sealing)
you haven't changed the gasket in 10 years
you are changing or you have removed your burnpot
Warranty
Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers
make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please
be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.
Shipping Info
This Item Qualifies For Free Shipping With
Orders Over $99!
When Will My Order Ship?
All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.
Do You Offer Express Shipping?
Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.
How Does Free Shipping Work?
Most orders over $99 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.
Do You Ship To Canada?
We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.
Do You Ship To Alaska Or Hawaii?
We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.
Do You Ship Outside The US Or Canada?
Unfortunately, at this time we do not offer international shipping other than to Canada.
Shipping Time Estimations
For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.
If you have one of the Harman P-Series pellet stoves you will need: 3-40-5647 If you have an Accentra, Accentra Insert, Advance, 52i, or 35i you will need: 3-40-674099