Skip to main content
Skip to main content
Product title:

Whitfield Low Limit Proof Of Fire Switch (140F) , 12057601-AMP

Product rating:
Product price:
$19.99

A $60.00 Savings over the OEM

Product SKU ! XP3004-1
Product MPN ! 12057601
Product availability: In Stock
Bullet point features

Description

Low Limit Proof of Fire Switch

Used on all Lennox pellet stoves and all Pre-Lennox Whitfield stove models.

This switch controls the stove out of the "STARTUP" mode and into the "RUN" mode. This switch also turns off the stove when the stove is cool after "SHUTDOWN" or if the stove runs out of fuel.

This is not the OEM replacement part that uses the screw and fork type fasteners for the wire leads. This switch requires modifications to change the terminal disconnects at the wire ends from the fork-type to 1/4" female spades.


Replacement For Part Numbers:

  • 12057601
  • H5887
  • 12150080

View Compatible Models

Compatible Models

    Lennox

  • Cascade

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage II-T C
  • Advantage II-T
  • Advantage III
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Legend
  • Prodigy 1
  • Prodigy 2
  • Profile 30 INS
  • Quest FS WP4
  • Quest INS WP4
  • Quest Plus FS WP4
  • Quest Plus INS WP4

Technical Specs

Close Value 140°F
Open Value 120°F

Videos

Instructions

Install Instructions For Whitfield Low Limit Proof Of Fire Switch (140F) , 12057601-AMP

Instructions for Installing Low-Limit Switch Part # XP3004-1, 12057601-AMP (140°F-20 low-limit switch):


This switch uses 1/4" spade connectors at the switch, previous OEM versions of this switch use fork terminals. The wires from your stove will need to be cut and fitted with 1/4" spade disconnects to use this switch which are not included.


Lennox: Elite Montage/ IHP IronStrike 32FS


Whitfield: Advantage, Cascade, Legend, Quest, Renaissance or Prodigy II:


  • To replace this switch, locate the side of the stove where the combustion blower is mounted. The switch is located on the exhaust blower housing.
  • Make sure that your stove is unplugged.
  • Using a flat head screw driver, loosen the two contact points for the wires and remove the two fork connectors. using a 1/4" socket wrench, remove the two hex screws that hold the switch to the housing.
  • If your new switch does not have screws for connecting the wires, use the screws from the old switch.
  • Install the new switch to the housing. Reconnect your wires. It does not matter which wire goes on which terminal.


**Note: Not all Whitfield pellet stoves used a low-limit switch for detecting proof of fire: Profile 20, Profile 30, and Optima units made by Lennox used a "photo-eye", part # 14750404

Troubleshooting

How Low-Limit Switch, part #XP3004-1, 12057601-AMP (140°F-20 lLow-Limit Switch) operates:


Switch should be a normally open circuit that closes at 140°F, opens again at fall in temp 140°F-20°F or 120°F. This switch is mounted in the air path of the exhaust and is commonly not malfunctioning but just dirty on the face of the switch. If your wire contacts wiggle a little on the switch, this may actually be okay and is common. A bad switch can be determined by heating the switch face directly with the flame of a match or lighter. After a moment you will hear the switch click. After you hear the click test the switch across the terminals for continuity. If there is no circuit present and you have determined that the switch face is over 140°F, replace the switch. Also, if the switch face is <140°F but still has a circuit, also replace the switch.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Information

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information
Jump back to product information tab navigation

Description

Low Limit Proof of Fire Switch

Used on all Lennox pellet stoves and all Pre-Lennox Whitfield stove models.

This switch controls the stove out of the "STARTUP" mode and into the "RUN" mode. This switch also turns off the stove when the stove is cool after "SHUTDOWN" or if the stove runs out of fuel.

This is not the OEM replacement part that uses the screw and fork type fasteners for the wire leads. This switch requires modifications to change the terminal disconnects at the wire ends from the fork-type to 1/4" female spades.


Replacement For Part Numbers:

  • 12057601
  • H5887
  • 12150080

View Compatible Models

Compatible Models

    Lennox

  • Cascade

    Whitfield

  • Advantage I
  • Advantage II INS
  • Advantage II
  • Advantage II-T C
  • Advantage II-T
  • Advantage III
  • Advantage Plus FS
  • Advantage Plus INS
  • Cascade
  • Legend
  • Prodigy 1
  • Prodigy 2
  • Profile 30 INS
  • Quest FS WP4
  • Quest INS WP4
  • Quest Plus FS WP4
  • Quest Plus INS WP4

Technical Specs

Close Value 140°F
Open Value 120°F

Instructions

Assembly Instructions For Whitfield Low Limit Proof Of Fire Switch (140F) , 12057601-AMP

Instructions for Installing Low-Limit Switch Part # XP3004-1, 12057601-AMP (140°F-20 low-limit switch):


This switch uses 1/4" spade connectors at the switch, previous OEM versions of this switch use fork terminals. The wires from your stove will need to be cut and fitted with 1/4" spade disconnects to use this switch which are not included.


Lennox: Elite Montage/ IHP IronStrike 32FS


Whitfield: Advantage, Cascade, Legend, Quest, Renaissance or Prodigy II:


  • To replace this switch, locate the side of the stove where the combustion blower is mounted. The switch is located on the exhaust blower housing.
  • Make sure that your stove is unplugged.
  • Using a flat head screw driver, loosen the two contact points for the wires and remove the two fork connectors. using a 1/4" socket wrench, remove the two hex screws that hold the switch to the housing.
  • If your new switch does not have screws for connecting the wires, use the screws from the old switch.
  • Install the new switch to the housing. Reconnect your wires. It does not matter which wire goes on which terminal.


**Note: Not all Whitfield pellet stoves used a low-limit switch for detecting proof of fire: Profile 20, Profile 30, and Optima units made by Lennox used a "photo-eye", part # 14750404

Troubleshooting

How Low-Limit Switch, part #XP3004-1, 12057601-AMP (140°F-20 lLow-Limit Switch) operates:


Switch should be a normally open circuit that closes at 140°F, opens again at fall in temp 140°F-20°F or 120°F. This switch is mounted in the air path of the exhaust and is commonly not malfunctioning but just dirty on the face of the switch. If your wire contacts wiggle a little on the switch, this may actually be okay and is common. A bad switch can be determined by heating the switch face directly with the flame of a match or lighter. After a moment you will hear the switch click. After you hear the click test the switch across the terminals for continuity. If there is no circuit present and you have determined that the switch face is over 140°F, replace the switch. Also, if the switch face is <140°F but still has a circuit, also replace the switch.


Warranty

Unfortunately, sometimes products do not work like they are supposed to. We offer a 90 day warranty on manufacturer defects. Some manufacturers make this a very simple and easy process unfortunately others do not. Items must be used in accordance with the manufacturers guidelines to qualify for warranty replacement. Please be advised that warranty claims for these parts may take up to 4 weeks for processing, and customers must cover shipping.

Shipping Info

This Item Qualifies For Free Shipping With Orders Over $199!

When Will My Order Ship?

All orders are typically processed within 24 hours of receiving payment and are shipped from us same day if placed before our shipping cutoff time (Monday - Friday: 12PM, Saturday: 10AM, Sunday: No Shipping), orders placed after our cutoff time are shipped the next morning.

Do You Offer Express Shipping?

Yes! Please note the shipping times are based on business days, weekends and holidays do not count to the delivery date. Please see our expedited ship time schedules here.

How Does Free Shipping Work?

Most orders over $199 qualify for free shipping! Orders which ship for free are shipped with either USPS or UPS based on our discretion. If you are using a PO box, free shipping orders will always go USPS.

Do You Ship To Canada?

We ship to Canada! We estimate USPS to take 4-10 days once receiving your package from us. We do not offer expedited shipping of any kind to Canada. Please allow an extra 2-5 days for all shipments to Canada. Free shipping is not available to Canada.

Do You Ship To Alaska Or Hawaii?

We ship to both Alaska and Hawaii! We do not offer next day or two day shipping to Alaska or Hawaii. Free shipping is not available to Alaska or Hawaii.

Do You Ship Outside The US Or Canada?

Unfortunately, at this time we do not offer international shipping other than to Canada.

Shipping Time Estimations

For information on shipping time estimations, see the Shipping Information & Transit Times on the shipping page.

Learn More About Our Shipping Information

Customer Reviews

Based on 42 reviews
98%
(41)
2%
(1)
0%
(0)
0%
(0)
0%
(0)
w
warren h.

Works as it should

D
Don D.
Ten senior

It was the problem after checking the fan,the vent sensor.-plug and play thank you

J
Jason

Fast shipping correct part

W
William K.
No part found in a store.

Could not find the part at any store so we got on line and you guys got it right out to us. Fast and easy.

E
Eugene M.J.
Vogelzang heat sensor

It was an extraordinary seamless experience. It couldn’t have gone better delivery earlier than indicated, and had the stove back up and running throwing heat in no time just overall great experience.

QUESTIONS & ANSWERS

If your question does not concern this specific product, use our contact form
Ask a Question
  • Will this thermo disc replace the low heat one in my vogelsang 5770 slimline pellet stove? I can't find a replacement for it. I would also need a gasket for it as well. Any help would be appreciated.

    According to the manual for the VG5770, your stove calls for low limit switch, part number 80599. 
    However there is no gasket between this t-switch and the exhaust blower housing. There is a gasket between the high limit switch seen at this link: 80601. We have both t-switches in stock. Feel free to call us direct with any questions.

Customer Reviews

Based on 42 reviews
98%
(41)
2%
(1)
0%
(0)
0%
(0)
0%
(0)
w
warren h.

Works as it should

D
Don D.
Ten senior

It was the problem after checking the fan,the vent sensor.-plug and play thank you

J
Jason

Fast shipping correct part

W
William K.
No part found in a store.

Could not find the part at any store so we got on line and you guys got it right out to us. Fast and easy.

E
Eugene M.J.
Vogelzang heat sensor

It was an extraordinary seamless experience. It couldn’t have gone better delivery earlier than indicated, and had the stove back up and running throwing heat in no time just overall great experience.